Are you new to WIDIA? Create an account and get started.
Create AccountAlready have an account? Sign in.
Sign InYou are currently using the following account for your cart and purchases:
Are you new to WIDIA? Create an account and get started.
Create AccountAlready have an account? Sign in.
Sign InYou are currently using the following account for your cart and purchases:
| Product # | 2030333 |
| ISO Catalog Number | XPNT160412 |
| ANSI Catalog Number | XPNT333 |
| Grade | TN7525 |
| Insert Num of Cutting Edges | 2 |
| [W] Insert Width Metric | 9,525 |
| [W] Insert Width Inch | .3750 |
| [L10] Ins Cut Edge Length mm | 15,87 |
| [L10] Ins Cut Edge Length In | .6250 |
| [S] Insert Thickness Metric | 4,790 |
| [S] Insert Thickness Inch | .1886 |
| [BS]Corner Facet Length Metric | 1,200 |
| [BS] Corner Facet Length Inch | .0472 |
| [REPSILON] Corner Radius MM | 1,200 |
| [REPSILON] Corner Radius Inch | .0468 |
| Average Chip Thickness [HM] | 0,160 |
| Average Chip Thickness [HM] | .0063 |
| Product # | ISO Catalog Number | ANSI Catalog Number | Grade | Insert Num of Cutting Edges | [W] Insert Width Metric | [W] Insert Width Inch | [L10] Ins Cut Edge Length mm | [L10] Ins Cut Edge Length In | [S] Insert Thickness Metric | [S] Insert Thickness Inch | [BS]Corner Facet Length Metric | [BS] Corner Facet Length Inch | [REPSILON] Corner Radius MM | [REPSILON] Corner Radius Inch | Average Chip Thickness [HM] | Average Chip Thickness [HM] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2029075 | XPNT160412 | XPNT160412 | TTM08 | 2 | 9,525 | .3750 | 15,87 | .6250 | 4,790 | .1886 | 1,200 | .0472 | 1,200 | .0469 | 0,160 | .0063 |
| 2030319 | XPNT160412 | XPNT333 | TN7535 | 2 | 9,525 | .3750 | 15,87 | .6250 | 4,790 | .1886 | 1,200 | .0472 | 1,200 | .0468 | 0,160 | .0063 |
| 2030333 | XPNT160412 | XPNT333 | TN7525 | 2 | 9,525 | .3750 | 15,87 | .6250 | 4,790 | .1886 | 1,200 | .0472 | 1,200 | .0468 | 0,160 | .0063 |
| 2964141 | XPNT160412 | XPNT333 | TN6525 | 2 | 9,525 | .3750 | 15,87 | .6250 | 4,790 | .1886 | 1,200 | .0472 | 1,200 | .0468 | 0,160 | .0063 |
| 2964174 | XPNT160412 | XPNT333 | TN6540 | 2 | 9,525 | .3750 | 15,87 | .6250 | 4,790 | .1886 | 1,200 | .0472 | 1,200 | .0468 | 0,160 | .0063 |
| 5427395 | XPNT160412 | XPNT333 | WK15CM | 2 | 9,525 | .3750 | 15,87 | .6250 | 4,790 | .1886 | 1,200 | .0472 | 1,200 | .0468 | 0,160 | .0063 |
| P | ||||||
| M | ||||||
| K | ● | |||||
| N | ||||||
| H | ||||||
| S | ● | |||||
| C | ||||||
| TN6525 | TN6540 | TN7525 | TN7535 | TTM08 | WK15CM |
| Material Group | LightMachining | GeneralPurpose | HeavyMachining | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | XPHT-GE | WP40PM | XPHT.. | WP40PM | XPHT.. | WP40PM |
| P3–P4 | XPHT-GE | TN6540 | XPHT.. | WP40PM | XPHT.. | WP40PM |
| P5–P6 | XPHT-GE | TN6540 | XPHT.. | WP40PM | XPHT.. | WP40PM |
| M1–M2 | XPHT-GE | TN6540 | XPHT.. | TN6540 | XPHT-MR | TN6540 |
| M3 | XPHT-GE | TN7535 | XPHT.. | WP40PM | XPHT-MR | TN7535 |
| K1–K2 | XPHT-GE | TN6510 | XPHT.. | TN6520 | XPHT-MR | WK15CM |
| K3 | XPHT-GE | TN6510 | XPHT.. | TN7535 | XPHT-MR | WK15CM |
| N1–N2 | XPHT-ALP | TN6501 | XPHT-ALP | TN6501 | XPHT-ALP | TN6501 |
| N3 | XPHT-ALP | TN6501 | XPHT-ALP | TN6501 | XPHT-ALP | TN6501 |
| S1–S2 | XPHT-GE | TN6540 | XPHT.. | TN6540 | XPHT-MR | TN6540 |
| S3 | XPHT-GE | WS30PM | XPHT.. | TN6540 | XPHT-MR | TN6540 |
| S4 | XPHT-GE | TN6540 | XPHT.. | TN6540 | XPHT-MR | TN6540 |
| H1 | XPHT-GE | WS30PM | XPHT.. | TN6540 | XPHT-MR | TN6540 |
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| XPHT-ALP | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,31 | 0,06 | 0,17 | 0,27 | 0,05 | 0,15 | 0,25 | XPHT-ALP |
| XPHT-GE | 0,19 | 0,47 | 0,70 | 0,14 | 0,34 | 0,50 | 0,11 | 0,26 | 0,38 | 0,09 | 0,22 | 0,33 | 0,08 | 0,20 | 0,30 | XPHT-GE |
| XPHT.. | 0,22 | 0,56 | 0,82 | 0,16 | 0,40 | 0,59 | 0,12 | 0,30 | 0,44 | 0,10 | 0,26 | 0,38 | 0,10 | 0,24 | 0,35 | XPHT.. |
| XPNT.. | 0,22 | 0,56 | 0,82 | 0,16 | 0,40 | 0,59 | 0,12 | 0,30 | 0,44 | 0,10 | 0,26 | 0,38 | 0,10 | 0,24 | 0,35 | XPNT.. |
| XPHT-MR | 0,23 | 0,59 | 0,92 | 0,17 | 0,43 | 0,66 | 0,13 | 0,32 | 0,50 | 0,11 | 0,28 | 0,43 | 0,10 | 0,25 | 0,40 | XPHT-MR |
| LightMachining | GeneralPurpose | HeavyMachining |
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| .F..ALP | .005 | .014 | .022 | .003 | .010 | .016 | .003 | .007 | .012 | .002 | .006 | .010 | .002 | .006 | .010 | .F..ALP |
| .E..AL | .005 | .014 | .022 | .003 | .010 | .016 | .003 | .007 | .012 | .002 | .006 | .010 | .002 | .006 | .010 | .E..AL |
| .E..GE | .008 | .018 | .027 | .005 | .013 | .020 | .004 | .010 | .015 | .004 | .009 | .013 | .003 | .008 | .012 | .E..GE |
| LightMachining | GeneralPurpose | HeavyMachining |
| Material Group | PA120 | THM-U | TN2510 | TN6501 | TN6502 | TN6510 | TN6520 | TN6525 | TN6540 | |||||||||||||||||||
| P | 0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 340 | 265 | 235 | 300 | 235 | 200 |
| 1 | – | – | – | – | – | – | 550 | 485 | 450 | – | – | – | – | – | – | – | – | – | – | – | – | 340 | 265 | 235 | 300 | 235 | 200 | |
| 2 | – | – | – | – | – | – | 340 | 310 | 275 | – | – | – | – | – | – | – | – | – | – | – | – | 265 | 210 | 180 | 210 | 160 | 140 | |
| 3 | – | – | – | – | – | – | 310 | 275 | 255 | – | – | – | – | – | – | – | – | – | – | – | – | 235 | 180 | 155 | 180 | 140 | 115 | |
| 4 | – | – | – | – | – | – | 230 | 215 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | 195 | 140 | 120 | 150 | 110 | 90 | |
| 5 | – | – | – | – | – | – | 275 | 250 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | 260 | 195 | 165 | 200 | 150 | 125 | |
| 6 | – | – | – | – | – | – | 190 | 170 | 145 | – | – | – | – | – | – | – | – | – | – | – | – | 170 | 135 | 110 | 135 | 100 | 85 | |
| M | 1 | – | – | – | – | – | – | 225 | 200 | 175 | – | – | – | – | – | – | – | – | – | – | – | – | 160 | 100 | 65 | 110 | 65 | 50 |
| 2 | – | – | – | – | – | – | 205 | 175 | 160 | – | – | – | – | – | – | – | – | – | – | – | – | 100 | 65 | 40 | 65 | 40 | 35 | |
| 3 | – | – | – | – | – | – | 160 | 145 | 125 | – | – | – | – | – | – | – | – | – | – | – | – | 105 | 65 | 45 | 70 | 40 | 35 | |
| K | 1 | 190 | 170 | 150 | 190 | 170 | 150 | 350 | 300 | 250 | – | – | – | – | – | – | 400 | 290 | 215 | 375 | 265 | 190 | 230 | 205 | 185 | 185 | 170 | 150 |
| 2 | – | – | – | – | – | – | 300 | 250 | 210 | – | – | – | – | – | – | 350 | 235 | 170 | 325 | 210 | 160 | 180 | 160 | 150 | 145 | 130 | 115 | |
| 3 | – | – | – | – | – | – | 250 | 210 | 165 | – | – | – | – | – | – | 280 | 215 | 165 | 250 | 190 | 135 | 150 | 135 | 120 | 130 | 120 | 105 | |
| N | 1 | 2000 | 1200 | 1000 | 2000 | 1200 | 1000 | – | – | – | 2000 | 1200 | 1000 | 1075 | 875 | 945 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 1365 | 815 | 665 | 1365 | 815 | 665 | – | – | – | 1365 | 815 | 665 | 1075 | 875 | 945 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 800 | 500 | 400 | 800 | 500 | 400 | – | – | – | 800 | 500 | 400 | 945 | 760 | 875 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 40 | 30 | 25 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 20 | 15 | 10 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 60 | 35 | 25 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 25 | 20 | |
| H | 1 | – | – | – | – | – | – | 115 | 90 | 60 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | 115 | 90 | 60 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | 85 | 65 | 45 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | TN7525 | TN7535 | TTI25 | THM | WK15CM | WP40PM | WS30PM | |||||||||||||||
| P | 0 | 340 | 260 | 235 | 455 | 395 | 370 | 360 | 300 | 250 | – | – | – | – | – | – | 295 | 260 | 245 | – | – | – |
| 1 | 340 | 260 | 235 | 455 | 395 | 370 | 360 | 300 | 250 | – | – | – | – | – | – | 295 | 260 | 245 | – | – | – | |
| 2 | 260 | 210 | 180 | 280 | 255 | 230 | 260 | 210 | 180 | – | – | – | – | – | – | 250 | 215 | 180 | – | – | – | |
| 3 | 235 | 180 | 155 | 255 | 230 | 205 | 260 | 210 | 180 | – | – | – | – | – | – | 230 | 195 | 160 | – | – | – | |
| 4 | 195 | 140 | 120 | 190 | 175 | 160 | 220 | 180 | 150 | – | – | – | – | – | – | 205 | 170 | 135 | – | – | – | |
| 5 | 260 | 195 | 165 | 260 | 230 | 210 | 265 | 195 | 165 | – | – | – | – | – | – | 170 | 155 | 135 | – | – | – | |
| 6 | 170 | 135 | 110 | 160 | 135 | 110 | 120 | 90 | 75 | – | – | – | – | – | – | 150 | 115 | 90 | – | – | – | |
| M | 1 | 205 | 185 | 155 | 205 | 185 | 155 | 400 | 260 | 180 | – | – | – | – | – | – | 195 | 170 | 155 | 225 | 200 | 185 |
| 2 | 185 | 160 | 140 | 185 | 160 | 140 | 270 | 170 | 120 | – | – | – | – | – | – | 175 | 150 | 125 | 205 | 180 | 145 | |
| 3 | 145 | 130 | 115 | 145 | 130 | 115 | 265 | 175 | 120 | – | – | – | – | – | – | 130 | 115 | 90 | 155 | 135 | 105 | |
| K | 1 | 315 | 235 | 200 | 295 | 265 | 240 | 185 | 155 | 130 | – | – | – | 420 | 385 | 340 | – | – | – | – | – | – |
| 2 | 270 | 200 | 165 | 235 | 210 | 190 | 150 | 120 | 105 | – | – | – | 335 | 295 | 275 | – | – | – | – | – | – | |
| 3 | 200 | 165 | 140 | 195 | 175 | 160 | 120 | 105 | 85 | – | – | – | 280 | 250 | 230 | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | 795 | 695 | 600 | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 795 | 695 | 600 | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 560 | 485 | 420 | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 40 | 35 | 30 | 45 | 40 | 30 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 40 | 35 | 30 | 45 | 40 | 30 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 | 55 | 45 | 30 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 65 | 50 | 35 | 85 | 60 | 40 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | TN2510 | TN6510 | TN6520 | TN6525 | TN6540 | WP25PM | |||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | 1345 | 1050 | 920 | 1180 | 920 | 785 | 1080 | 935 | 885 |
| 2 | – | – | – | – | – | – | – | – | – | 1050 | 820 | 705 | 820 | 625 | 540 | 900 | 785 | 655 | |
| 3 | – | – | – | – | – | – | – | – | – | 920 | 705 | 605 | 705 | 540 | 460 | 835 | 705 | 575 | |
| 4 | – | – | – | – | – | – | – | – | – | 770 | 560 | 475 | 590 | 425 | 360 | 740 | 605 | 490 | |
| 5 | – | – | – | – | – | – | – | – | – | 1015 | 770 | 640 | 785 | 590 | 490 | 605 | 560 | 490 | |
| 6 | – | – | – | – | – | – | – | – | – | 670 | 525 | 425 | 525 | 395 | 330 | 540 | 410 | 330 | |
| M | 1 | – | – | – | – | – | – | – | – | – | 625 | 395 | 260 | 425 | 260 | 195 | 670 | 590 | 540 |
| 2 | – | – | – | – | – | – | – | – | – | 395 | 260 | 165 | 260 | 165 | 130 | 605 | 525 | 425 | |
| 3 | – | – | – | – | – | – | – | – | – | 410 | 260 | 180 | 280 | 165 | 130 | 460 | 395 | 310 | |
| K | 1 | 1380 | 1180 | 985 | 1575 | 1150 | 835 | 1475 | 1050 | 755 | – | – | – | – | – | – | 755 | 670 | 605 |
| 2 | 1180 | 985 | 820 | 1380 | 920 | 670 | 1280 | 820 | 625 | – | – | – | – | – | – | 590 | 525 | 490 | |
| 3 | 985 | 820 | 655 | 1100 | 855 | 655 | 985 | 740 | 525 | – | – | – | – | – | – | 490 | 445 | 395 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 150 | 115 | 100 | 130 | 115 | 80 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 80 | 65 | 35 | 130 | 115 | 80 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 230 | 130 | 100 | 165 | 130 | 80 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | 195 | 100 | 80 | 230 | 165 | 115 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 395 | 295 | 230 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | TN7525 | TN7535 | WK15CM | WS30PM | WP40PM | TTI25 | |||||||||||||
| P | 1 | 1345 | 1015 | 920 | 1490 | 1295 | 1215 | – | – | – | 1215 | 1050 | 985 | 970 | 855 | 805 | 1180 | 985 | 820 |
| 2 | 1015 | 820 | 705 | 920 | 835 | 755 | – | – | – | 1000 | 885 | 720 | 820 | 705 | 590 | 855 | 690 | 590 | |
| 3 | 920 | 705 | 605 | 835 | 755 | 670 | – | – | – | 935 | 785 | 640 | 755 | 640 | 525 | 855 | 690 | 590 | |
| 4 | 770 | 560 | 475 | 625 | 575 | 525 | – | – | – | 820 | 670 | 540 | 670 | 560 | 445 | 720 | 590 | 490 | |
| 5 | 1015 | 770 | 640 | 855 | 755 | 690 | – | – | – | 670 | 625 | 540 | 560 | 510 | 445 | 870 | 640 | 540 | |
| 6 | 670 | 525 | 425 | 525 | 445 | – | – | – | – | 605 | 460 | 360 | 490 | 375 | 295 | 395 | 295 | 245 | |
| M | 1 | – | – | – | 670 | 605 | 510 | – | – | – | 740 | 655 | 605 | 640 | 560 | 510 | 1310 | 855 | 590 |
| 2 | – | – | – | 605 | 525 | 460 | – | – | – | 670 | 590 | 475 | 575 | 490 | 410 | 885 | 560 | 395 | |
| 3 | – | – | – | 475 | 425 | 375 | – | – | – | 510 | 445 | 345 | 425 | 375 | 295 | 870 | 575 | 395 | |
| K | 1 | 1245 | 920 | 785 | 970 | 870 | 785 | 1380 | 1265 | 1115 | 835 | 740 | 640 | – | – | – | 605 | 510 | 425 |
| 2 | 1065 | 785 | 655 | 770 | 690 | 625 | 1100 | 970 | 900 | 655 | 590 | 540 | – | – | – | 490 | 395 | 345 | |
| 3 | 785 | 655 | 560 | 640 | 575 | – | 920 | 820 | 755 | 540 | 490 | 445 | – | – | – | 395 | 345 | 280 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 150 | 130 | 100 | 130 | 115 | 100 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 150 | 130 | 100 | 130 | 115 | 100 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 180 | 150 | 100 | 165 | 130 | 100 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 280 | 195 | 130 | 215 | 165 | 115 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | 445 | 330 | 245 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
Carbide grade TN6525 has aPVD-TiAlN multilayer. It is ideal for light and medium machining
applications in steels and high-strength nodular cast irons.
Coated carbide grade TN6540 has a PVD-TiAlN multilayer and is excellent for medium and heavy
machining applications. It is ideal for use in all steels and nodular cast irons.
Coated carbide grade TN7525 has an MT-CVD-TiN-TiCN-Al203-TiN coating. Engineered for light
and medium machining of all steels and nodular cast irons.
