Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

H/P Solid Carbide End Mills - Finishing

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (111)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (111)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (111)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (111)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (111)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (110)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (96)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (96)
  • M Stainless Steel (111)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (111)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (110)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (96)
  • K Cast Iron (111)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (111)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (110)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (96)
  • N Non-Ferrous Materials (14)
    • N1
      Wrought Aluminum
      (14)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (14)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (11)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (11)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (14)
    • N6
      Carbon, Graphite Composites, CFRP
      (14)
  • S High-Temp Alloys (96)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (96)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (96)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (96)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (96)
  • H Hardened Materials (97)
    • H1
      Hardened Materials 44-48 HRC
      (97)
    • H2
      Hardened Materials 48-55 HRC
      (10)
Select All Star
  • CN (9)
  • DE (18)
  • GB (11)
  • SG (6)
  • US (32)
Applications
Applications
  • Pocket Pocket (57)
  • Pocket Helical Pocket Helical (76)
  • Pocket Milling Pocket Milling (68)
  • Pocket Plunge Milling Pocket Plunge Milling (11)
  • Profile Milling Profile Milling (3)
  • Ramping Ramping (45)
  • Shoulder Ball Nose Shoulder Ball Nose (14)
  • Shoulder Milling Shoulder Milling (89)
  • Shoulder Roughing Shoulder Roughing (24)
  • Shoulder Square End Shoulder Square End (99)
  • Slot Ball Nose Slot Ball Nose (14)
  • Slot Milling Slot Milling (44)
  • Slot Square End Slot Square End (46)
Cutting Diameter
Cutting Diameter
  • 0.039 in (2)
  • 0.06 in (2)
  • 0.079 in (3)
  • 0.098 in (3)
  • 0.119 in (7)
  • 0.125 in (2)
  • 0.138 in (2)
  • 0.157 in (8)
  • 0.177 in (1)
  • 0.188 in (2)
  • 0.197 in (5)
  • 0.237 in (10)
  • 0.25 in (8)
  • 0.313 in (2)
  • 0.315 in (10)
  • 0.375 in (6)
  • 0.394 in (10)
  • 0.473 in (11)
  • 0.5 in (8)
  • 0.551 in (3)
  • 0.625 in (3)
  • 0.63 in (8)
  • 0.709 in (1)
  • 0.75 in (9)
  • 0.787 in (4)
  • 0.984 in (1)
  • 1.0 in (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.0 mm (2)
  • 1.5 mm (2)
  • 2.0 mm (3)
  • 2.5 mm (3)
  • 3.0 mm (7)
  • 3.176 mm (2)
  • 3.5 mm (2)
  • 4.0 mm (8)
  • 4.5 mm (1)
  • 4.775 mm (2)
  • 5.0 mm (5)
  • 6.0 mm (10)
  • 6.351 mm (8)
  • 7.95 mm (2)
  • 8.0 mm (10)
  • 9.525 mm (6)
  • 10.0 mm (10)
  • 12.0 mm (11)
  • 12.701 mm (8)
  • 14.0 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (8)
  • 18.0 mm (1)
  • 19.05 mm (9)
  • 20.0 mm (4)
  • 25.0 mm (1)
  • 25.401 mm (5)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 3.0 mm (8)
  • 4.0 mm (4)
  • 5.0 mm (4)
  • 6.0 mm (1)
  • 7.0 mm (5)
  • 8.0 mm (3)
  • 9.0 mm (3)
  • 9.5 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (3)
  • 11.0 mm (4)
  • 11.125 mm (1)
  • 12.0 mm (6)
  • 12.701 mm (5)
  • 13.0 mm (4)
  • 14.0 mm (4)
  • 15.875 mm (4)
  • 16.0 mm (4)
  • 19.0 mm (4)
  • 19.05 mm (3)
  • 20.0 mm (2)
  • 20.651 mm (1)
  • 22.0 mm (9)
  • 22.225 mm (3)
  • 25.0 mm (3)
  • 25.401 mm (2)
  • 26.0 mm (8)
  • 28.576 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (7)
  • 38.0 mm (3)
  • 38.1 mm (7)
  • 45.0 mm (1)
  • 50.801 mm (2)
  • 57.151 mm (5)
  • 76.2 mm (2)
  • 101.601 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.119 in (8)
  • 0.157 in (4)
  • 0.197 in (4)
  • 0.237 in (1)
  • 0.276 in (5)
  • 0.315 in (3)
  • 0.354 in (3)
  • 0.374 in (1)
  • 0.375 in (2)
  • 0.394 in (3)
  • 0.433 in (4)
  • 0.438 in (1)
  • 0.473 in (6)
  • 0.5 in (5)
  • 0.512 in (4)
  • 0.551 in (4)
  • 0.625 in (4)
  • 0.63 in (4)
  • 0.748 in (4)
  • 0.75 in (3)
  • 0.787 in (2)
  • 0.814 in (1)
  • 0.866 in (9)
  • 0.875 in (3)
  • 0.984 in (3)
  • 1.0 in (2)
  • 1.024 in (8)
  • 1.125 in (2)
  • 1.25 in (5)
  • 1.26 in (7)
  • 1.496 in (3)
  • 1.5 in (7)
  • 1.772 in (1)
  • 2.0 in (2)
  • 2.25 in (5)
  • 3.0 in (2)
  • 4.0 in (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.119 in (7)
  • 0.157 in (3)
  • 0.197 in (3)
  • 0.237 in (1)
  • 0.276 in (3)
  • 0.315 in (3)
  • 0.354 in (2)
  • 0.374 in (1)
  • 0.375 in (2)
  • 0.394 in (3)
  • 0.433 in (3)
  • 0.438 in (1)
  • 0.473 in (5)
  • 0.5 in (5)
  • 0.512 in (4)
  • 0.551 in (4)
  • 0.625 in (4)
  • 0.63 in (3)
  • 0.748 in (4)
  • 0.75 in (3)
  • 0.787 in (1)
  • 0.814 in (1)
  • 0.866 in (7)
  • 0.875 in (3)
  • 0.984 in (1)
  • 1.0 in (2)
  • 1.024 in (8)
  • 1.125 in (2)
  • 1.25 in (5)
  • 1.26 in (5)
  • 1.379 in (2)
  • 1.496 in (3)
  • 1.5 in (7)
  • 1.575 in (2)
  • 1.772 in (1)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.25 in (5)
  • 2.362 in (2)
  • 3.0 in (2)
  • 4.0 in (1)
Reach Min to Reach Max
Reach
Reach
  • 3.0 mm (7)
  • 4.0 mm (3)
  • 5.0 mm (3)
  • 6.0 mm (1)
  • 7.0 mm (3)
  • 8.0 mm (3)
  • 9.0 mm (2)
  • 9.5 mm (1)
  • 9.525 mm (2)
  • 10.0 mm (3)
  • 11.0 mm (3)
  • 11.125 mm (1)
  • 12.0 mm (5)
  • 12.701 mm (5)
  • 13.0 mm (4)
  • 14.0 mm (4)
  • 15.875 mm (4)
  • 16.0 mm (3)
  • 19.0 mm (4)
  • 19.05 mm (3)
  • 20.0 mm (1)
  • 20.651 mm (1)
  • 22.0 mm (7)
  • 22.225 mm (3)
  • 25.0 mm (1)
  • 25.401 mm (2)
  • 26.0 mm (8)
  • 28.576 mm (2)
  • 31.75 mm (5)
  • 32.0 mm (5)
  • 35.0 mm (2)
  • 38.0 mm (3)
  • 38.1 mm (7)
  • 40.0 mm (2)
  • 45.0 mm (1)
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 57.151 mm (5)
  • 60.0 mm (2)
  • 76.2 mm (2)
  • 101.601 mm (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (135)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Straight-Cylindrical (82)
  • Weldon (54)
Number of Flutes
Number of Flutes
  • 2 (14)
  • 3 (58)
  • 4 (2)
  • 5 (16)
  • 6 (42)
  • 8 (4)
Corner configuration
Corner Style
Corner Style
  • BALL NOSE (14)
  • CHAMFER (8)
  • RADIUS (12)
  • SQUARE END (102)
Corner Radius
Corner Radius
  • 0.0 in (110)
  • 0.01 in (4)
  • 0.019 in (6)
  • 0.02 in (1)
  • 0.03 in (3)
  • 0.039 in (1)
  • 0.06 in (1)
  • 0.079 in (1)
  • 0.098 in (1)
  • 0.119 in (1)
  • 0.157 in (1)
  • 0.197 in (2)
  • 0.237 in (2)
  • 0.315 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (110)
  • 0.25 mm (4)
  • 0.45 mm (6)
  • 0.5 mm (1)
  • 0.75 mm (3)
  • 1.0 mm (1)
  • 1.5 mm (1)
  • 2.0 mm (1)
  • 2.5 mm (1)
  • 3.0 mm (1)
  • 4.0 mm (1)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 8.0 mm (2)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (128)
  • 0.1 mm (5)
  • 0.2 mm (1)
  • 0.301 mm (2)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (128)
  • 0.004 in (5)
  • 0.008 in (1)
  • 0.012 in (2)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TIALN (36)
  • TIALN-LW (6)
  • TICN-CT (5)
  • UNCOATED (4)
  • WP15PE (85)
Rough Finish
Rough Finish
  • F (109)
  • FR (27)
Front-End
Neck Diameter
Neck Diameter
  • 0.222 in (1)
  • 0.296 in (1)
  • 0.37 in (1)
  • 0.374 in (1)
  • 0.444 in (1)
  • 0.453 in (1)
  • 0.593 in (1)
  • 0.61 in (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 5.65 mm (1)
  • 7.525 mm (1)
  • 9.4 mm (1)
  • 9.5 mm (1)
  • 11.275 mm (1)
  • 11.5 mm (1)
  • 15.05 mm (1)
  • 15.5 mm (1)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
Back-End
Back-End Diameter
Back-End Diameter
  • 3.176 mm (2)
  • 4.0 mm (8)
  • 4.775 mm (2)
  • 6.0 mm (35)
  • 6.351 mm (8)
  • 7.95 mm (2)
  • 8.0 mm (10)
  • 9.525 mm (6)
  • 10.0 mm (10)
  • 12.0 mm (11)
  • 12.701 mm (8)
  • 14.0 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (8)
  • 18.0 mm (1)
  • 19.05 mm (9)
  • 20.0 mm (4)
  • 25.0 mm (1)
  • 25.401 mm (5)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.125 in (2)
  • 0.157 in (8)
  • 0.188 in (2)
  • 0.237 in (35)
  • 0.25 in (8)
  • 0.313 in (2)
  • 0.315 in (10)
  • 0.375 in (6)
  • 0.394 in (10)
  • 0.473 in (11)
  • 0.5 in (8)
  • 0.551 in (3)
  • 0.625 in (3)
  • 0.63 in (8)
  • 0.709 in (1)
  • 0.75 in (9)
  • 0.787 in (4)
  • 0.984 in (1)
  • 1.0 in (5)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • 3857138571
  • Helix Angle: 45°Helix Angle: 45°
  • Corner Style: Square EndCorner Style: Square End
  • 3855138551
  • Slotting: Square EndSlotting: Square End
  • Ramping: BlankRamping: Blank
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Shank - Cylindrical  WeldonShank - Cylindrical Weldon
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
1661574 D50302002RW D503020S2W TIALN   Weldon 2.0000 .0790 6.0 .2362 3.0000 .1180 50.0000 1.969 3
    List price:
    $32,41 /each.
    Your price:
    Qty
    1661578 D50303002RW D503030S2W TIALN   Weldon 3.0000 .1180 6.0 .2362 4.0000 .1570 50.0000 1.969 3
      List price:
      $32,41 /each.
      Your price:
      Qty
      1661583 D50304002RW D503040S2W TIALN   Weldon 4.0000 .1570 6.0 .2362 5.0000 .1970 54.0000 2.126 3
        List price:
        $32,41 /each.
        Your price:
        Qty
        1661588 D50305002RW D5030500S2W TIALN   Weldon 5.0000 .1970 6.0 .2362 6.0000 .2360 54.0000 2.126 3
          List price:
          $32,41 /each.
          Your price:
          Qty
          1661593 D50306002RW D503060S2W TIALN   Weldon 6.0000 .2360 6.0 .2362 7.0000 .2760 54.0000 2.126 3
            List price:
            $32,71 /each.
            Your price:
            Qty
            1661680 D51303002RW D513030S2W TIALN   Weldon 3.0000 .1180 6.0 .2362 7.0000 .2760 57.0000 2.244 3
              List price:
              $49,16 /each.
              Your price:
              Qty
              List price:
              Discount: %
              Your price:
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              • Tool Dimensions: Flute Configuration: 5Tool Dimensions: Flute Configuration: 5
              • Helix Angle: 45°Helix Angle: 45°
              • Corner Style: Square EndCorner Style: Square End
              • Ramping: BlankRamping: Blank
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              • Shank - Cylindrical  PlainShank - Cylindrical Plain
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
              5577188 4C0505000ST 4C0505000ST WP15PE   Straight-Cylindrical 5 4.7630 .1875 4.763 .1875 15.8750 .6250 50.8000 2.000
                List price:
                $40,85 /each.
                Your price:
                Qty
                5577242 4C0513005ST 4C0513005ST WP15PE   Straight-Cylindrical 5 12.7000 .5000 12.7 .5 25.4000 1.000 76.2000 3.000
                  List price:
                  $104,91 /each.
                  Your price:
                  Qty
                  5577244 4C0516006ST 4C0516006ST WP15PE   Straight-Cylindrical 5 15.8750 .6250 15.875 .625 31.7500 1.250 88.9000 3.500
                    List price:
                    $212,59 /each.
                    Your price:
                    Qty
                    5577245 4C0519007ST 4C0519007ST WP15PE   Straight-Cylindrical 5 19.0500 .7500 19.05 .75 38.1000 1.500 101.6000 4.000
                      List price:
                      $299,36 /each.
                      Your price:
                      Qty
                      5577250 4C1513005ST 4C1513005ST WP15PE   Straight-Cylindrical 5 12.7000 .5000 12.7 .5 50.8000 2.000 114.3000 4.500
                        List price:
                        $138,32 /each.
                        Your price:
                        Qty
                        5577253 4C1525008ST 4C1525008ST WP15PE   Straight-Cylindrical 5 25.4000 1.000 25.4 1.0 57.1500 2.250 127.0000 5.000
                          List price:
                          $657,34 /each.
                          Your price:
                          Qty
                          List price:
                          Discount: %
                          Your price:
                          Replacement This item is no longer available
                          Replacement Product Please contact customer service for assistance
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          • Tool Dimensions: Flute Configuration: 6Tool Dimensions: Flute Configuration: 6
                          • Helix Angle: 45°Helix Angle: 45°
                          • Corner Style: Square EndCorner Style: Square End
                          • 3855138551
                          • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                          • Shank - Cylindrical  WeldonShank - Cylindrical Weldon
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
                          5559100 D50706002W D50706002W WP15PE   Weldon 6.0000 .2362 6.0 .2362 10.0000 .3937 54.0000 2.126 6
                            List price:
                            $55,70 /each.
                            Your price:
                            Qty
                            5559102 D50710004W D50710004W WP15PE   Weldon 10.0000 .3937 10.0 .3937 14.0000 .5512 66.0000 2.598 6
                              List price:
                              $99,34 /each.
                              Your price:
                              Qty
                              5559103 D50712005W D50712005W WP15PE   Weldon 12.0000 .4724 12.0 .4724 16.0000 .6299 73.0000 2.874 6
                                List price:
                                $134,60 /each.
                                Your price:
                                Qty
                                5559105 D50716006W D50716006W WP15PE   Weldon 16.0000 .6299 16.0 .6299 22.0000 .8661 82.0000 3.228 6
                                  List price:
                                  $240,43 /each.
                                  Your price:
                                  Qty
                                  5559108 D51706002W D51706002W WP15PE   Weldon 6.0000 .2362 6.0 .2362 13.0000 .5118 57.0000 2.244 6
                                    List price:
                                    $46,94 /each.
                                    Your price:
                                    Qty
                                    5559109 D51708003W D51708003W WP15PE   Weldon 8.0000 .3150 8.0 .315 19.0000