successfully added to cart
View Cart

Notifications

Mark all as read

S-Style Clamping • For Positive Style Inserts

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Select First Choice
  • DE (27)
  • GB (3)
  • US (5)
Applications
  • Back Boring Back Boring (19)
  • Facing Facing (4)
  • ID Facing ID Facing (1)
  • Multiple Direction Cutting Multiple Direction Cutting (151)
  • Profiling Profiling (74)
  • TRN Boring TRN Boring (137)
  • Turning Turning (4)
Workpiece Material
  • P Steel (221)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (221)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (221)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (221)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (221)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (221)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (221)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (221)
  • M Stainless Steel (221)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (221)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (221)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (221)
  • K Cast Iron (221)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (221)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (221)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (221)
  • N Non-Ferrous Materials (259)
    • N1
      Wrought Aluminum
      (259)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (259)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (251)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (259)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (251)
    • N6
      Carbon, Graphite Composites, CFRP
      (251)
    • N7
      MMC's
      (251)
  • S High-Temp Alloys (222)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (222)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (222)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (222)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (117)
  • H Hardened Materials (190)
    • H1
      Hardened Materials 44-48 HRC
      (190)
    • H2
      Hardened Materials 48-55 HRC
      (190)
    • H3
      Hardened Materials 56-60 HRC
      (190)
    • H4
      Hardened Materials >60 HRC
      (190)
Cutting Condition
  • Heavily Interrupted Cut (216)
  • Lightly Interrupted Cut (221)
  • Smooth Cut (221)
  • Varying Depth of Cut (221)
Cutting Condition Material
  • H-All (71)
  • K-All (221)
  • M-All (221)
  • N-All (103)
  • P-All (221)
  • S-All (221)
Tool Cutting Edge Angle
  • 0.0 (21)
  • -3.0 (18)
  • 90.0 (74)
  • 93.0 (44)
  • 95.0 (99)
  • 107.5 (16)
to
Connection Style
  • Boring Bar Shank (271)
Cutting Edges Per Insert
  • 1.0 (244)
  • 2.0 (212)
  • 3.0 (56)
  • 4.0 (120)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.1 (70)
  • 0.2 (227)
  • 0.203 (77)
  • 0.394 (6)
  • 0.397 (177)
  • 0.4 (263)
  • 0.794 (113)
  • 0.8 (264)
  • 1.2 (73)
  • 1.6 (2)
to
Corner Radius
  • 0.004 (70)
  • 0.0078 (18)
  • 0.0079 (23)
  • 0.008 (222)
  • 0.0155 (6)
  • 0.0156 (263)
  • 0.0157 (5)
  • 0.0158 (58)
  • 0.016 (10)
  • 0.0312 (107)
  • 0.0313 (264)
  • 0.0315 (90)
  • 0.0469 (73)
  • 0.047 (13)
  • 0.0472 (18)
  • 0.063 (2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • CG5 (63)
  • CG6 (21)
  • CM1 (63)
  • HCK10 (81)
  • HK1500 (71)
  • HK35 (67)
  • HWK10 (10)
  • HWK15 (81)
  • K420 (18)
  • PB100 (65)
  • PB170 (49)
  • PB250 (72)
  • PB300 (41)
  • PD100 (81)
  • PD50 (65)
  • SP0G00 (10)
  • SP0PW3 (7)
  • SPN3W1 (16)
  • THM (111)
  • THM-X (72)
  • TN1000 (31)
  • TN10P (111)
  • TN10U (111)
  • TN15M (109)
  • TN15U (102)
  • TN2000 (78)
  • TN20K (111)
  • TN20P (111)
  • TN30M (109)
  • TN4000 (53)
  • TN5015 (90)
  • TN5020 (100)
  • TN5105 (90)
  • TN5120 (110)
  • TN6010 (49)
  • TN6025 (42)
  • TN7005 (51)
  • TN7010 (100)
  • TN7015 (110)
  • TN7025 (100)
  • TN7035 (100)
  • TN7105 (108)
  • TN7110 (110)
  • TN7115 (110)
  • TN7125 (110)
  • TN7135 (110)
  • TN8025 (94)
  • TTI15 (76)
  • TTM (16)
  • TTM09 (18)
  • TTR (94)
  • TTS (47)
  • TTX (59)
  • W00160 (13)
  • W00162 (37)
  • W00342 (41)
  • WBH10C (95)
  • WBH10P (167)
  • WBH10U (177)
  • WBH20P (71)
  • WBH25P (203)
  • WBH25U (44)
  • WBH30P (141)
  • WBK45U (57)
  • WDN00U (150)
  • WDN25U (244)
  • WK05CT (104)
  • WK15CT (94)
  • WK20CT (231)
  • WM15CT (227)
  • WM25CT (221)
  • WP15CT (221)
  • WP20TT (54)
  • WP25CT (263)
  • WP35CT (68)
  • WS10PT (75)
  • WS25PT (68)
  • WU10HT (103)
  • WU20HT (26)
  • YY4200 (5)
Hand Of Tool
  • L (124)
  • R (147)
Minimum Axial Groove Diameter
  • 0.315 (4)
  • 0.3937 (2)
  • 0.415 (4)
  • 0.433 (12)
  • 0.4331 (4)
  • 0.48 (12)
  • 0.5118 (9)
  • 0.512 (12)
  • 0.6 (17)
  • 0.6299 (8)
  • 0.63 (15)
  • 0.73 (5)
  • 0.77 (17)
  • 0.787 (17)
  • 0.7874 (20)
  • 0.85 (5)
  • 0.93 (17)
  • 0.98 (11)
  • 0.984 (16)
  • 0.9843 (17)
  • 1.03 (1)
  • 1.2 (10)
  • 1.2598 (14)
  • 1.26 (8)
  • 1.3 (8)
  • 1.47 (1)
  • 1.5748 (1)
  • 1.575 (4)
  • 1.76 (1)
to
Minimum Axial Groove Diameter
  • 8.0 (4)
  • 10.0 (2)
  • 10.54 (2)
  • 10.541 (2)
  • 11.0 (16)
  • 12.19 (7)
  • 12.192 (5)
  • 13.0 (21)
  • 15.24 (17)
  • 16.0 (23)
  • 18.54 (3)
  • 18.542 (2)
  • 19.55 (1)
  • 19.558 (9)
  • 19.56 (7)
  • 20.0 (37)
  • 21.59 (5)
  • 23.62 (10)
  • 23.622 (7)
  • 24.89 (5)
  • 24.892 (6)
  • 25.0 (33)
  • 26.16 (1)
  • 30.48 (10)
  • 32.0 (22)
  • 33.02 (8)
  • 37.338 (1)
  • 40.0 (5)
  • 44.704 (1)
to
Cutting Direction
  • B (88)
  • E (173)
  • P (10)
Rake Angle Style
  • NEGATIVE-ZERO (219)
  • NEUTRAL (ZERO) (51)
  • POSITIVE-NEGATIVE (1)
Maximum Bore Depth
  • 32.0 (7)
  • 36.0 (4)
  • 38.08 (5)
  • 38.1 (5)
  • 40.0 (11)
  • 47.625 (1)
  • 47.628 (4)
  • 48.0 (19)
  • 50.8 (12)
  • 57.15 (6)
  • 60.0 (10)
  • 63.48 (2)
  • 63.5 (7)
  • 63.52 (3)
  • 63.6 (2)
  • 64.0 (21)
  • 72.0 (15)
  • 76.0 (1)
  • 76.2 (22)
  • 76.4 (2)
  • 80.0 (17)
  • 95.22 (2)
  • 95.25 (6)
  • 96.0 (16)
  • 100.0 (14)
  • 101.6 (12)
  • 114.0 (2)
  • 114.3 (8)
  • 120.0 (16)
  • 127.0 (1)
  • 128.0 (4)
  • 150.0 (8)
  • 152.4 (6)
  • 192.0 (1)
to
Maximum Bore Depth
  • 1.24 (4)
  • 1.26 (3)
  • 1.4172 (4)
  • 1.5 (10)
  • 1.56 (4)
  • 1.5748 (4)
  • 1.576 (3)
  • 1.872 (1)
  • 1.875 (4)
  • 1.88 (8)
  • 1.89 (11)
  • 2.0 (12)
  • 2.25 (6)
  • 2.358 (2)
  • 2.3622 (4)
  • 2.364 (4)
  • 2.48 (2)
  • 2.5 (12)
  • 2.5196 (10)
  • 2.52 (11)
  • 2.82 (2)
  • 2.832 (3)
  • 2.8344 (10)
  • 3.0 (25)
  • 3.1496 (6)
  • 3.16 (11)
  • 3.75 (8)
  • 3.7794 (11)
  • 3.78 (5)
  • 3.92 (2)
  • 3.936 (6)
  • 3.9372 (6)
  • 4.0 (12)
  • 4.5 (10)
  • 4.722 (2)
  • 4.7244 (14)
  • 5.0 (1)
  • 5.04 (4)
  • 5.9058 (8)
  • 6.0 (6)
  • 7.5588 (1)
to
Boring Bar Material
  • C (121)
  • S (150)
Wiper Insert
  • N (268)
  • Y (104)
Front-End
Clamp Style
  • S (271)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (128)
  • D-DIAMOND/RHOMBIC 55 (76)
  • T-TRIANGLE 60 (56)
  • V-DIAMOND/RHOMBIC 35 (12)
Maximum Cutting Depth
  • 2.81 (1)
  • 3.09 (1)
  • 3.2 (2)
  • 4.655 (1)
  • 4.75 (5)
  • 6.35 (2)
to
Maximum Cutting Depth
  • 0.11 (1)
  • 0.1217 (1)
  • 0.126 (2)
  • 0.1832 (1)
  • 0.187 (5)
  • 0.25 (2)
to
Insert Geometry
Cutting Tool Material
  • B H (195)
  • B L (221)
  • C N (42)
  • D P (251)
  • H T (76)
  • H W (268)
Back-End
Connection Type
  • BORING BAR (270)
  • SQUARE SHANK (1)
Back-End Diameter
  • 0.2362 (4)
  • 0.31 (4)
  • 0.312 (1)
  • 0.3125 (4)
  • 0.315 (14)
  • 0.375 (16)
  • 0.39 (4)
  • 0.393 (2)
  • 0.3937 (8)
  • 0.394 (7)
  • 0.47 (10)
  • 0.472 (3)
  • 0.4724 (10)
  • 0.5 (18)
  • 0.62 (2)
  • 0.625 (20)
  • 0.6299 (21)
  • 0.63 (16)
  • 0.75 (29)
  • 0.787 (2)
  • 0.7874 (20)
  • 0.79 (11)
  • 0.98 (2)
  • 0.984 (6)
  • 0.9843 (14)
  • 1.0 (17)
  • 1.25 (1)
  • 1.2598 (1)
  • 1.26 (4)
  • 1.5 (1)
to
Back-End Diameter
  • 6.0 (4)
  • 7.9375 (1)
  • 7.938 (4)
  • 8.0 (18)
  • 9.52 (5)
  • 9.525 (11)
  • 10.0 (21)
  • 12.0 (23)
  • 12.7 (18)
  • 15.87 (4)
  • 15.875 (13)
  • 15.88 (3)
  • 15.9 (2)
  • 16.0 (37)
  • 19.0 (3)
  • 19.05 (24)
  • 19.1 (2)
  • 20.0 (33)
  • 25.0 (22)
  • 25.4 (17)
  • 31.75 (1)
  • 32.0 (5)
  • 38.1 (1)
to
other
Grade
  • W (8)
  • WG (263)
Platform
  • S-Style Clamping (146)
Tool Unit
  • I (109)
  • M (163)
Display Configurable Products
  • false (272)
Over All Length [L]
  • 110.0 (11)
  • 122.0 (1)
  • 123.0 (1)
  • 123.25 (1)
  • 123.625 (1)
  • 124.25 (1)
  • 125.0 (17)
  • 125.73 (1)
  • 127.0 (3)
  • 148.0 (1)
  • 149.25 (3)
  • 149.315 (1)
  • 150.0 (10)
  • 151.13 (2)
  • 151.25 (2)
  • 152.4 (14)
  • 152.5 (1)
  • 177.5 (1)
  • 178.0 (2)
  • 179.34 (2)
  • 180.0 (8)
  • 181.25 (2)
  • 199.41 (2)
  • 200.0 (31)
  • 201.105 (2)
  • 201.422 (2)
  • 201.45 (2)
  • 203.2 (16)
  • 250.0 (28)
  • 251.45 (3)
  • 251.58 (2)
  • 251.587 (1)
  • 251.59 (1)
  • 251.714 (2)
  • 252.9 (2)
  • 253.995 (2)
  • 254.0 (43)
  • 300.0 (26)
  • 302.25 (2)
  • 302.39 (1)
  • 304.8 (15)
  • 350.0 (1)
  • 355.6 (2)
to
Over All Length [L]
  • 4.3307 (4)
  • 4.331 (7)
  • 4.803 (1)
  • 4.843 (1)
  • 4.8524 (1)
  • 4.867 (1)
  • 4.8917 (1)
  • 4.921 (9)
  • 4.9213 (8)
  • 4.95 (1)
  • 5.0 (3)
  • 5.827 (1)
  • 5.876 (3)
  • 5.879 (1)
  • 5.9055 (2)
  • 5.906 (8)
  • 5.95 (2)
  • 5.9547 (2)
  • 6.0 (14)
  • 6.0039 (1)
  • 6.988 (1)
  • 7.008 (2)
  • 7.061 (2)
  • 7.0866 (8)
  • 7.1358 (1)
  • 7.136 (1)
  • 7.851 (2)
  • 7.874 (31)
  • 7.918 (2)
  • 7.93 (2)
  • 7.931 (1)
  • 7.9311 (1)
  • 8.0 (16)
  • 9.8425 (17)
  • 9.843 (11)
  • 9.8996 (2)
  • 9.9 (1)
  • 9.905 (4)
  • 9.91 (2)
  • 9.9567 (2)
  • 10.0 (45)
  • 11.811 (26)
  • 11.9 (2)
  • 11.905 (1)
  • 12.0 (15)
  • 13.7795 (1)
  • 14.0 (2)
to
Insert Hand
  • L (18)
  • N (268)
  • R (24)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Internal Machining • Boring Bars and Adapters for Negative Inserts

A-SVUB 93°
(4 Products)
  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
  • 5236852368
  • Back BoringBack Boring
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [L2] Head Length [L2] Head Length [A] Coolant Hole Diameter [A] Coolant Hole Dia [CS] Coolant Supply Size Gage Insert Insert Screw ID Drive Size
3883438 A25TSVUBR16 A25TSVUBR16   WG 25.0 .9843 32.0000 1.259 17.0000 .6693 300.0000 11.811         1/4-18 NPT VB..160408 T15
    List price:
    $223.59 /each.
    Your price::
    Qty
    3883439 A25TSVUBL16 A25TSVUBL16   WG 25.0 .9843 32.0000 1.259 17.0000 .6693 300.0000 11.811         1/4-18 NPT VB..160408 T15
      List price:
      $223.59 /each.
      Your price::
      Qty
      3883440 A20SSVUBR11 A20SSVUBR11   WG 20.0 .79 25.0000 .9840 13.0000 .5120 250.0000 9.843 25.3000 .9930 4.0000 .1600 1/8-27 NPT VB..110304 T7
        List price:
        $180.54 /each.
        Your price::
        Qty
        3883441 A20SSVUBL11 A20SSVUBL11   WG 20.0 .7874 25.0000 .9843 13.0000 .5118 250.0000 9.842         1/8-27 NPT VB..110304 T7
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          Internal Machining • Boring Bars and Adapters for Negative Inserts

          A-SVQB 107,5°
          (4 Products)
          • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
          • 5236852368
          • Back BoringBack Boring
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [CS] Coolant Supply Size Gage Insert Insert Screw ID Drive Size
          3883434 A25TSVQBR16 A25TSVQBR16   WG 25.0 .984 32.0000 1.260 17.0000 .6690 300.0000 11.811 1/4-18 NPT VB..160408 T15
            List price:
            $223.59 /each.
            Your price::
            Qty
            3883435 A25TSVQBL16 A25TSVQBL16   WG 25.0 .984 32.0000 1.260 17.0000 .6690 300.0000 11.811 1/4-18 NPT VB..160408 T15
              List price:
              $223.59 /each.
              Your price::
              Qty
              3883436 A16RSVQBR11 A16RSVQBR11   WG 16.0 .6299 20.0000 .7874 11.0000 .4331 200.0000 7.874 1/8-27 NPT VB..110304 T7
                List price:
                $146.86 /each.
                Your price::
                Qty
                3883437 A16RSVQBL11 A16RSVQBL11   WG 16.0 .6299 20.0000 .7874 11.0000 .4331 200.0000 7.874 1/8-27 NPT VB..110304 T7
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  S-Style Clamping Boring Bars for Positive Inserts

                  Carbide Shank with Through Coolant
                  (2 Products)
                  • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                  • 5236852368
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [A] Coolant Hole Diameter [A] Coolant Hole Dia [A1] Coolant Hole Diameter Exit [A1] Coolant Hole Diameter Exit [GAAP] Axial Rake Angle Gage Insert Insert Screw ID Drive Size
                  2023600 E08KSCFCR06 E08KSCFCR06   WG 8.0 .315 11.0000 .4331 6.0000 .2362 125.0000 4.921 3.0000 .1181 1.9000 .0748 0.000 CC..060204 T8
                    List price:
                    $228.24 /each.
                    Your price::
                    Qty
                    2031019 E08KSCFCL06 E08KSCFCL06   WG 8.0 .315 11.0000 .4331 6.0000 .2362 125.0000 4.921 3.0000 .1181 1.9000 .0748 0.000 CC..060204 T8
                      List price:
                      $228.24 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty

                      Sold in pkg. of

                      ORIGINAL PRODUCT

                      S-Style Clamping Boring Bars for Positive Inserts

                      Carbide Shank with Through Coolant
                      (21 Products)
                      • I.D. Chamfering & ProfilingI.D. Chamfering & Profiling
                      • 5236852368
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L1] Tool Length [L1] Tool Length [A] Coolant Hole Diameter [A] Coolant Hole Dia [A1] Coolant Hole Diameter Exit [A1] Coolant Hole Diameter Exit [CS] Coolant Supply Size [GAAP] Axial Rake Angle Gage Insert Insert Screw ID Drive Size
                      2023607 E12QSCLCL06 E12QSCLCL06   WG 12.0 .4724 16.0000 .6299 9.0000 .3543 180.0000 7.086 4.5000 .1772 2.9000 .1142   0.000 CC..060204 T8