M-Style Clamping • For Negative Style Inserts

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (14)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (14)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (14)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (14)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (14)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (14)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (14)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (14)
  • M Stainless Steel (14)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (14)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (14)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (14)
  • K Cast Iron (14)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (14)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (14)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (14)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (7)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (10)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (7)
    • N6
      Carbon, Graphite Composites, CFRP (7)
    • N7
      MMC's (7)
  • S High-Temp Alloys (14)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (14)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (14)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (14)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (14)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC (9)
    • H2
      Hardened Materials 48-55 HRC (9)
    • H3
      Hardened Materials 56-60 HRC (9)
    • H4
      Hardened Materials >60 HRC (9)
Applications
Applications
  • CRT Profiling CRT Profiling (10)
  • ID Facing ID Facing (14)
  • Multiple Direction Cutting Multiple Direction Cutting (7)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (14)
  • Lightly Interrupted Cut (14)
  • Smooth Cut (14)
  • Varying Depth of Cut (14)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (2)
  • 75.0 (2)
  • 85.0 (2)
  • 90.0 (5)
  • 95.0 (3)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Over All Length [L]
Over All Length [L]
  • 1.972 in (2)
  • 1.998 in (1)
  • 2.056 in (1)
  • 2.165 in (4)
  • 2.206 in (1)
  • 2.48 in (2)
  • 2.757 in (3)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 50.1 mm (2)
  • 50.75 mm (1)
  • 52.225 mm (1)
  • 55.0 mm (4)
  • 56.026 mm (1)
  • 63.0 mm (2)
  • 70.0 mm (3)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (3)
  • 0.008 in (7)
  • 0.016 in (13)
  • 0.031 in (14)
  • 0.047 in (10)
  • 0.063 in (10)
  • 0.095 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (3)
  • 0.2 mm (7)
  • 0.4 mm (13)
  • 0.8 mm (14)
  • 1.201 mm (10)
  • 1.6 mm (10)
  • 2.401 mm (1)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CW2015 (9)
  • CW5025 (9)
  • HK1500 (9)
  • PB100 (3)
  • PB170 (3)
  • PB250 (3)
  • PB300 (3)
  • SP0A00 (1)
  • SP0NTA (4)
  • THM (9)
  • THM-X (4)
  • THMF-X (8)
  • TN10P (13)
  • TN10U (13)
  • TN15M (9)
  • TN15U (9)
  • TN2000 (9)
  • TN20K (14)
  • TN20P (14)
  • TN30M (9)
  • TN30P (10)
  • TN4000 (9)
  • TN5015 (10)
  • TN5020 (9)
  • TN5105 (9)
  • TN5120 (9)
  • TN6010 (3)
  • TN6025 (8)
  • TN7005 (3)
  • TN7010 (14)
  • TN7015 (14)
  • TN7025 (14)
  • TN7035 (14)
  • TN7105 (7)
  • TN7110 (13)
  • TN7115 (13)
  • TN7125 (14)
  • TN7135 (14)
  • TN8025 (9)
  • TTI15 (3)
  • TTM (1)
  • TTM09 (6)
  • TTR (5)
  • TTS (8)
  • TTX (8)
  • WBH10C (4)
  • WBH10P (3)
  • WBH10U (8)
  • WBH20P (8)
  • WBH25P (8)
  • WBH25U (8)
  • WBH30P (3)
  • WBK40U (4)
  • WBK45U (7)
  • WDN00U (3)
  • WDN25U (7)
  • WK05CT (14)
  • WK15CT (9)
  • WK20CT (14)
  • WM15CT (10)
  • WM25CT (14)
  • WM35CT (10)
  • WP05CT (3)
  • WP15CT (14)
  • WP25CT (14)
  • WP35CT (10)
  • WS10PT (13)
  • WS25PT (10)
  • WU10HT (10)
  • WU10PT (8)
  • WU25PT (8)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 40.0 mm (4)
  • 50.0 mm (5)
  • 60.0 mm (2)
  • 70.0 mm (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.575 in (4)
  • 1.969 in (5)
  • 2.362 in (2)
  • 2.757 in (3)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (3)
  • S-SQUARE 90 (10)
  • S-SQUARE ON EDGE 90 (1)
  • T-TRIANGLE 60 (5)
Cartridge Size
Cartridge Size
  • 10 - mm of Cutting Height (4)
  • 12 - mm of Cutting Height (5)
  • 16 - mm of Cutting Height (2)
  • 20 - mm of Cutting Height (3)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (8)
  • B L (8)
  • C A (9)
  • C N (10)
  • D P (7)
  • H T (3)
  • H W (14)
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?