Small Hole Boring Bars For Profiling

Select Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (24)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (24)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (24)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (24)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (24)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (24)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (24)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (24)
  • M Stainless Steel (24)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (24)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (24)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (24)
  • K Cast Iron (24)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (24)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (24)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (24)
  • N Non-Ferrous Materials (24)
    • N1
      Wrought Aluminum (24)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (24)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (24)
Select All Star
  • US (5)
Applications
Applications
  • Back Boring Back Boring (25)
  • Multiple Direction Cutting Multiple Direction Cutting (27)
  • TRN Boring TRN Boring (27)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 67.5 (5)
  • 90.0 (6)
  • 92.0 (2)
  • 95.0 (14)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (24)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 4.0 in (10)
  • 4.5 in (2)
  • 5.0 in (2)
  • 6.0 in (9)
  • 8.0 in (2)
  • 10.0 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 101.601 mm (10)
  • 114.301 mm (2)
  • 127.0 mm (2)
  • 152.4 mm (9)
  • 203.201 mm (2)
  • 254.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
Corner configuration
Corner Radius
Corner Radius
  • 0.007 in (24)
  • 0.015 in (24)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.176 mm (24)
  • 0.375 mm (24)
Corner Radius Min to Corner Radius Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CG5 (24)
  • CG6 (24)
  • CM1 (24)
Hand Of Tool
Hand Of Tool
  • L (5)
  • R (22)
Wiper Insert
Wiper Insert
  • N (24)
F Dimension
F Dimension
  • 4.275 mm (1)
  • 5.601 mm (7)
  • 6.0 mm (1)
  • 6.375 mm (4)
  • 6.601 mm (2)
  • 7.0 mm (1)
  • 7.926 mm (4)
  • 8.6 mm (2)
  • 9.5 mm (4)
  • 11.101 mm (1)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.168 in (1)
  • 0.221 in (7)
  • 0.237 in (1)
  • 0.251 in (4)
  • 0.26 in (2)
  • 0.276 in (1)
  • 0.312 in (4)
  • 0.339 in (2)
  • 0.374 in (4)
  • 0.437 in (1)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 8.6 mm (1)
  • 9.15 mm (7)
  • 10.15 mm (2)
  • 10.75 mm (4)
  • 11.375 mm (1)
  • 13.076 mm (4)
  • 13.726 mm (2)
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 16.25 mm (2)
  • 19.425 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.339 in (1)
  • 0.36 in (7)
  • 0.4 in (2)
  • 0.423 in (4)
  • 0.448 in (1)
  • 0.515 in (4)
  • 0.54 in (2)
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.64 in (2)
  • 0.765 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (13)
  • E (12)
  • S (2)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (1)
  • NEUTRAL (ZERO) (26)
Maximum Bore Depth
Maximum Bore Depth
  • 0.9 in (2)
  • 1.0 in (5)
  • 1.25 in (2)
  • 1.417 in (1)
  • 1.498 in (1)
  • 1.499 in (1)
  • 1.5 in (5)
  • 1.875 in (2)
  • 1.891 in (1)
  • 2.0 in (2)
  • 2.249 in (2)
  • 3.0 in (2)
  • 3.749 in (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 22.85 mm (2)
  • 25.401 mm (5)
  • 31.75 mm (2)
  • 36.0 mm (1)
  • 38.051 mm (1)
  • 38.075 mm (1)
  • 38.1 mm (5)
  • 47.625 mm (2)
  • 48.0 mm (1)
  • 50.801 mm (2)
  • 57.125 mm (2)
  • 76.2 mm (2)
  • 95.226 mm (1)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (12)
  • S (13)
Front-End
Clamp Style
Clamp Style
  • S (22)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.09 in (3)
  • 0.091 in (6)
  • 0.092 in (1)
  • 0.098 in (1)
  • 0.116 in (1)
  • 0.12 in (6)
  • 0.121 in (3)
  • 0.13 in (2)
  • 0.146 in (1)
  • 0.147 in (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 2.275 mm (3)
  • 2.301 mm (6)
  • 2.325 mm (1)
  • 2.5 mm (1)
  • 2.95 mm (1)
  • 3.026 mm (2)
  • 3.051 mm (4)
  • 3.075 mm (3)
  • 3.301 mm (2)
  • 3.7 mm (1)
  • 3.725 mm (1)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • H W (24)
Back-End
Back-End Diameter
Back-End Diameter
  • 6.0 mm (1)
  • 6.351 mm (3)
  • 7.926 mm (2)
  • 8.0 mm (1)
  • 9.525 mm (3)
  • 12.0 mm (2)
  • 12.701 mm (7)
  • 15.875 mm (6)
  • 19.05 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.237 in (1)
  • 0.25 in (3)
  • 0.312 in (2)
  • 0.315 in (1)
  • 0.375 in (3)
  • 0.473 in (2)
  • 0.5 in (7)
  • 0.625 in (6)
  • 0.75 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
You are about to add to your My Solutions page. Do you want to proceed?
product-image
Please adjust the following properties from

ISO Catalog Number

ANSI Catalog Number

to find similar products.

The following files are available

Please select a file to download

Models

You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Number Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?