Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Notifications

Mark all as read

Search results for

Select Filters
Filters
Filters
    • Applied Filters:
    • Clear all filters
  • X All-Star:
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (674)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (522)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (522)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (522)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (523)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (649)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (595)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (563)
  • M Stainless Steel (674)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (674)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (674)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (599)
  • K Cast Iron (528)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (528)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (528)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (453)
  • N Non-Ferrous Materials (291)
    • N1
      Wrought Aluminum
      (284)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (284)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (256)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (282)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (258)
    • N6
      Carbon, Graphite Composites, CFRP
      (259)
    • N7
      MMC's
      (252)
  • S High-Temp Alloys (599)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (599)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (595)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (593)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (589)
  • H Hardened Materials (597)
    • H1
      Hardened Materials 44-48 HRC
      (597)
    • H2
      Hardened Materials 48-55 HRC
      (540)
    • H3
      Hardened Materials 56-60 HRC
      (267)
    • H4
      Hardened Materials >60 HRC
      (266)
Select All Star
  • CN (362)
  • DE (664)
  • GB (217)
  • IN (173)
  • SG (2)
  • TR (2)
  • US (976)
Applications
Applications
  • Drilling Drilling (4)
  • Face Milling Face Milling (567)
  • Pocket Pocket (813)
  • Pocket Helical Pocket Helical (783)
  • Pocket Milling Pocket Milling (813)
  • Pocket Plunge Milling Pocket Plunge Milling (112)
  • Profile Milling Profile Milling (106)
  • Ramping Ramping (819)
  • Shoulder Ball Nose Shoulder Ball Nose (106)
  • Shoulder Milling Shoulder Milling (863)
  • Shoulder Roughing Shoulder Roughing (422)
  • Shoulder Square End Shoulder Square End (765)
  • Slot Ball Nose Slot Ball Nose (280)
  • Slot Milling Slot Milling (659)
  • Slot Square End Slot Square End (560)
  • Trochoidal Milling Trochoidal Milling (32)
Cutting Diameter
Cutting Diameter
  • 0.397 mm (1)
  • 0.794 mm (3)
  • 1.0 mm (1)
  • 1.1906 mm (1)
  • 1.5 mm (1)
  • 1.588 mm (14)
  • 1.984 mm (2)
  • 2.0 mm (1)
  • 2.381 mm (20)
  • 2.5 mm (1)
  • 2.778 mm (2)
  • 3.0 mm (2)
  • 3.175 mm (45)
  • 3.572 mm (1)
  • 3.969 mm (4)
  • 4.0 mm (7)
  • 4.366 mm (1)
  • 4.762 mm (7)
  • 4.7625 mm (2)
  • 4.763 mm (50)
  • 5.0 mm (6)
  • 5.159 mm (2)
  • 5.556 mm (3)
  • 5.953 mm (1)
  • 6.0 mm (8)
  • 6.35 mm (101)
  • 6.747 mm (1)
  • 7.0 mm (2)
  • 7.144 mm (2)
  • 7.9375 mm (1)
  • 7.938 mm (50)
  • 8.731 mm (2)
  • 9.128 mm (1)
  • 9.525 mm (116)
  • 10.0 mm (3)
  • 10.319 mm (2)
  • 10.716 mm (1)
  • 11.113 mm (14)
  • 12.0 mm (2)
  • 12.7 mm (183)
  • 14.0 mm (1)
  • 14.288 mm (6)
  • 15.875 mm (74)
  • 16.0 mm (2)
  • 17.462 mm (2)
  • 19.05 mm (128)
  • 20.0 mm (2)
  • 20.638 mm (1)
  • 22.225 mm (3)
  • 25.4 mm (67)
  • 31.75 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.0156 in (1)
  • 0.0312 in (1)
  • 0.0313 in (2)
  • 0.0394 in (1)
  • 0.0469 in (1)
  • 0.0591 in (1)
  • 0.0625 in (14)
  • 0.0781 in (2)
  • 0.0787 in (1)
  • 0.0938 in (20)
  • 0.0984 in (1)
  • 0.1094 in (2)
  • 0.1181 in (2)
  • 0.125 in (45)
  • 0.1406 in (1)
  • 0.1562 in (4)
  • 0.157 in (1)
  • 0.1575 in (6)
  • 0.1719 in (1)
  • 0.1875 in (58)
  • 0.188 in (1)
  • 0.1969 in (6)
  • 0.2031 in (2)
  • 0.2188 in (3)
  • 0.2344 in (1)
  • 0.236 in (1)
  • 0.2362 in (7)
  • 0.25 in (101)
  • 0.2656 in (1)
  • 0.2756 in (2)
  • 0.2812 in (2)
  • 0.3125 in (51)
  • 0.3438 in (2)
  • 0.3594 in (1)
  • 0.375 in (116)
  • 0.3937 in (3)
  • 0.4062 in (2)
  • 0.4219 in (1)
  • 0.4375 in (14)
  • 0.4724 in (2)
  • 0.5 in (183)
  • 0.5512 in (1)
  • 0.5625 in (6)
  • 0.625 in (74)
  • 0.6299 in (2)
  • 0.6875 in (2)
  • 0.75 in (128)
  • 0.7874 in (2)
  • 0.8125 in (1)
  • 0.875 in (3)
  • 1.0 in (67)
  • 1.25 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.0133 in (1)
  • 0.0312 in (1)
  • 0.0625 in (1)
  • 0.0781 in (3)
  • 0.0938 in (2)
  • 0.1094 in (2)
  • 0.125 in (5)
  • 0.1563 in (1)
  • 0.1575 in (2)
  • 0.1875 in (15)
  • 0.1969 in (1)
  • 0.236 in (1)
  • 0.248 in (1)
  • 0.25 in (15)
  • 0.3125 in (13)
  • 0.315 in (1)
  • 0.3438 in (1)
  • 0.375 in (32)
  • 0.4331 in (2)
  • 0.4375 in (3)
  • 0.4724 in (2)
  • 0.5 in (63)
  • 0.5118 in (8)
  • 0.5512 in (1)
  • 0.5625 in (11)
  • 0.591 in (1)
  • 0.625 in (75)
  • 0.6299 in (4)
  • 0.748 in (3)
  • 0.75 in (90)
  • 0.7874 in (1)
  • 0.8125 in (12)
  • 0.8661 in (3)
  • 0.875 in (43)
  • 1.0 in (88)
  • 1.0236 in (1)
  • 1.0625 in (1)
  • 1.125 in (27)
  • 1.2205 in (1)
  • 1.25 in (121)
  • 1.2598 in (1)
  • 1.375 in (2)
  • 1.4173 in (1)
  • 1.4961 in (1)
  • 1.5 in (97)
  • 1.625 in (29)
  • 1.75 in (21)
  • 1.875 in (5)
  • 1.9685 in (1)
  • 2.0 in (30)
  • 2.125 in (3)
  • 2.2047 in (1)
  • 2.25 in (43)
  • 2.3622 in (1)
  • 2.5 in (9)
  • 2.625 in (1)
  • 3.0 in (30)
  • 3.125 in (1)
  • 3.25 in (5)
  • 3.75 in (3)
  • 4.0 in (10)
  • 5.0 in (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.338 mm (1)
  • 0.794 mm (1)
  • 1.588 mm (1)
  • 1.984 mm (3)
  • 2.381 mm (2)
  • 2.778 mm (2)
  • 3.175 mm (5)
  • 3.969 mm (1)
  • 4.0 mm (2)
  • 4.762 mm (11)
  • 4.763 mm (4)
  • 5.0 mm (1)
  • 6.0 mm (1)
  • 6.3 mm (1)
  • 6.35 mm (15)
  • 6.4 mm (1)
  • 7.938 mm (13)
  • 8.0 mm (1)
  • 8.731 mm (1)
  • 9.525 mm (32)
  • 11.0 mm (2)
  • 11.112 mm (1)
  • 11.113 mm (2)
  • 12.0 mm (2)
  • 12.7 mm (66)
  • 13.0 mm (8)
  • 14.0 mm (1)
  • 14.288 mm (11)
  • 15.0 mm (1)
  • 15.875 mm (75)
  • 16.0 mm (4)
  • 19.0 mm (3)
  • 19.05 mm (87)
  • 20.0 mm (1)
  • 20.638 mm (12)
  • 22.0 mm (3)
  • 22.225 mm (43)
  • 25.4 mm (87)
  • 26.0 mm (1)
  • 26.988 mm (1)
  • 28.575 mm (27)
  • 31.0 mm (1)
  • 31.75 mm (121)
  • 32.0 mm (1)
  • 34.925 mm (2)
  • 36.0 mm (1)
  • 38.0 mm (1)
  • 38.1 mm (97)
  • 41.275 mm (29)
  • 44.45 mm (21)
  • 47.625 mm (5)
  • 50.0 mm (1)
  • 50.8 mm (30)
  • 53.975 mm (3)
  • 56.0 mm (1)
  • 57.15 mm (43)
  • 60.0 mm (1)
  • 63.5 mm (9)
  • 66.675 mm (1)
  • 76.2 mm (30)
  • 79.375 mm (1)
  • 82.55 mm (5)
  • 95.25 mm (3)
  • 101.6 mm (10)
  • 127.0 mm (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 2.3 mm (1)
  • 3.801 mm (2)
  • 4.48 mm (1)
  • 4.763 mm (1)
  • 5.128 mm (1)
  • 5.13 mm (1)
  • 5.187 mm (1)
  • 5.238 mm (1)
  • 5.8 mm (2)
  • 5.85 mm (1)
  • 6.275 mm (1)
  • 6.35 mm (3)
  • 6.787 mm (1)
  • 6.9 mm (1)
  • 7.112 mm (1)
  • 7.4 mm (3)
  • 7.401 mm (3)
  • 7.938 mm (2)
  • 9.0 mm (1)
  • 9.018 mm (2)
  • 9.438 mm (1)
  • 9.525 mm (9)
  • 10.08 mm (1)
  • 12.0 mm (3)
  • 12.3 mm (1)
  • 12.5 mm (1)
  • 12.549 mm (2)
  • 12.55 mm (1)
  • 12.621 mm (2)
  • 12.7 mm (22)
  • 12.77 mm (1)
  • 12.9 mm (1)
  • 13.0 mm (5)
  • 14.2 mm (2)
  • 14.288 mm (1)
  • 15.0 mm (1)
  • 15.3 mm (2)
  • 15.875 mm (27)
  • 16.0 mm (1)
  • 16.8 mm (1)
  • 18.0 mm (1)
  • 18.323 mm (1)
  • 18.661 mm (1)
  • 18.7 mm (1)
  • 18.9 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (40)
  • 19.1 mm (1)
  • 19.586 mm (1)
  • 20.447 mm (1)
  • 20.55 mm (2)
  • 20.598 mm (2)
  • 20.638 mm (1)
  • 21.3 mm (2)
  • 22.0 mm (1)
  • 22.225 mm (33)
  • 23.908 mm (2)
  • 24.11 mm (1)
  • 25.4 mm (12)
  • 26.0 mm (1)
  • 26.795 mm (1)
  • 28.575 mm (1)
  • 31.3 mm (1)
  • 31.607 mm (1)
  • 31.75 mm (77)
  • 32.0 mm (1)
  • 32.417 mm (1)
  • 32.687 mm (1)
  • 36.8 mm (1)
  • 38.0 mm (1)
  • 38.1 mm (54)
  • 40.64 mm (1)
  • 41.275 mm (8)
  • 44.45 mm (15)
  • 45.8 mm (1)
  • 47.625 mm (4)
  • 50.0 mm (1)
  • 50.276 mm (1)
  • 50.8 mm (16)
  • 53.975 mm (1)
  • 54.1 mm (1)
  • 56.0 mm (1)
  • 57.15 mm (38)
  • 60.325 mm (1)
  • 63.5 mm (7)
  • 76.2 mm (15)
  • 79.375 mm (2)
  • 82.55 mm (9)
  • 101.6 mm (7)
  • 107.95 mm (1)
  • 152.4 mm (3)
Reach Min to Reach Max
Reach
Reach
  • 0.0906 in (1)
  • 0.1496 in (2)
  • 0.177 in (1)
  • 0.1875 in (1)
  • 0.202 in (1)
  • 0.2042 in (1)
  • 0.2062 in (1)
  • 0.2289 in (1)
  • 0.229 in (1)
  • 0.23 in (1)
  • 0.247 in (1)
  • 0.25 in (3)
  • 0.2672 in (1)
  • 0.2717 in (1)
  • 0.28 in (1)
  • 0.2914 in (4)
  • 0.293 in (2)
  • 0.3125 in (3)
  • 0.3543 in (1)
  • 0.3551 in (2)
  • 0.3716 in (1)
  • 0.375 in (9)
  • 0.397 in (1)
  • 0.472 in (1)
  • 0.4724 in (2)
  • 0.485 in (1)
  • 0.4939 in (1)
  • 0.4941 in (4)
  • 0.4969 in (3)
  • 0.5 in (22)
  • 0.5073 in (1)
  • 0.5118 in (5)
  • 0.5591 in (2)
  • 0.5625 in (1)
  • 0.591 in (1)
  • 0.6039 in (2)
  • 0.625 in (27)
  • 0.6299 in (1)
  • 0.6628 in (1)
  • 0.7087 in (1)
  • 0.7214 in (1)
  • 0.7347 in (2)
  • 0.744 in (1)
  • 0.748 in (1)
  • 0.75 in (40)
  • 0.753 in (1)
  • 0.7711 in (1)
  • 0.805 in (1)
  • 0.8091 in (2)
  • 0.8109 in (2)
  • 0.8125 in (1)
  • 0.837 in (2)
  • 0.8661 in (1)
  • 0.875 in (33)
  • 0.9412 in (2)
  • 0.9492 in (1)
  • 1.0 in (12)
  • 1.0236 in (1)
  • 1.055 in (1)
  • 1.125 in (1)
  • 1.2337 in (1)
  • 1.2444 in (1)
  • 1.25 in (77)
  • 1.2598 in (1)
  • 1.2762 in (1)
  • 1.2869 in (1)
  • 1.4469 in (1)
  • 1.4961 in (1)
  • 1.5 in (54)
  • 1.6 in (1)
  • 1.625 in (8)
  • 1.75 in (15)
  • 1.8013 in (1)
  • 1.875 in (4)
  • 1.9685 in (1)
  • 1.9794 in (1)
  • 2.0 in (16)
  • 2.125 in (1)
  • 2.1313 in (1)
  • 2.2047 in (1)
  • 2.25 in (38)
  • 2.375 in (1)
  • 2.5 in (7)
  • 3.0 in (15)
  • 3.125 in (2)
  • 3.25 in (9)
  • 4.0 in (7)
  • 4.25 in (1)
  • 6.0 in (3)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 62.0 (1)
  • 76.0 (6)
  • 82.0 (2)
  • 90.0 (901)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • SAFE-LOCK (49)
  • Straight-Cylindrical (701)
  • Weldon (205)
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Style
Corner Style
  • BALL NOSE (103)
  • CHAMFER (81)
  • RADIUS (356)
  • SQUARE END (357)
  • TORUS (3)
Corner Radius
Corner Radius
  • 0.0 mm (492)
  • 0.2 mm (1)
  • 0.25 mm (2)
  • 0.254 mm (8)
  • 0.3 mm (1)
  • 0.381 mm (61)
  • 0.397 mm (2)
  • 0.4 mm (1)
  • 0.406 mm (1)
  • 0.457 mm (1)
  • 0.5 mm (5)
  • 0.508 mm (7)
  • 0.5953 mm (1)
  • 0.597 mm (1)
  • 0.75 mm (1)
  • 0.762 mm (140)
  • 0.794 mm (3)
  • 0.813 mm (1)
  • 0.992 mm (1)
  • 1.016 mm (2)
  • 1.143 mm (1)
  • 1.19 mm (1)
  • 1.191 mm (4)
  • 1.27 mm (7)
  • 1.388 mm (1)
  • 1.524 mm (73)
  • 1.588 mm (9)
  • 1.984 mm (2)
  • 2.0 mm (1)
  • 2.183 mm (1)
  • 2.286 mm (8)
  • 2.38 mm (1)
  • 2.381 mm (9)
  • 2.5 mm (1)
  • 2.58 mm (1)
  • 2.778 mm (1)
  • 3.0 mm (2)
  • 3.048 mm (36)
  • 3.175 mm (13)
  • 3.18 mm (1)
  • 3.572 mm (1)
  • 3.969 mm (7)
  • 4.763 mm (9)
  • 5.0 mm (1)
  • 5.556 mm (2)
  • 6.35 mm (13)
  • 7.144 mm (1)
  • 7.938 mm (4)
  • 9.525 mm (7)
  • 11.113 mm (1)
  • 12.7 mm (3)
  • 15.875 mm (1)
Corner Radius Min to Corner Radius Max