Пластины типа T
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая системаДюймовая система
Workpiece Material
Workpiece Material
- P Steel (265)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(265)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(265)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(265)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(265)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(265)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(265)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(265)
- M Stainless Steel (96)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(96)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(96)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(96)
- K Cast Iron (154)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(154)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(154)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(154)
- N Non-Ferrous Materials (25)
- N1Wrought Aluminum (25)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(25)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (25)
- S High-Temp Alloys (114)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(114)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(114)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(114)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(58)
- H Hardened Materials (1)
- H1Hardened Materials 44-48 HRC(1)
- H2Hardened Materials 48-55 HRC(1)
- H3Hardened Materials 56-60 HRC(1)
- H4Hardened Materials >60 HRC(1)
Select All Star
- CN (12)
- DE (79)
- GB (7)
- IN (61)
- SG (41)
- US (39)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (99)
- Lightly Interrupted Cut (170)
- Smooth Cut (216)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (1)
- 3.0 (126)
- 6.0 (190)
до
Corner Radius
Corner Radius
- 0.008 in(2)
- 0.016 in(81)
- 0.031 in(146)
- 0.047 in(67)
- 0.063 in(17)
- 0.094 in(3)
до
Corner Radius
Corner Radius
- 0.2 mm(2)
- 0.4 mm(81)
- 0.8 mm(146)
- 1.2 mm(67)
- 1.6 mm(17)
- 2.4 mm(3)
до
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (1)
- THM (18)
- THM X (1)
- THM-F (1)
- THM-X (5)
- THMF-X (2)
- TN2000 (7)
- TN4000 (5)
- TTM08 (3)
- TTM09 (1)
- TTMS (1)
- TTR (4)
- TTR-X (2)
- TTS (3)
- WK05CT (5)
- WK15CT (10)
- WK20CT (39)
- WM15CT (10)
- WM25CT (34)
- WM35CT (7)
- WP15CT (41)
- WP20TT (1)
- WP25CT (46)
- WP35CT (26)
- WS10PT (15)
- WS25PT (13)
- WU10HT (6)
- WU10PT (5)
- WU25PT (5)
Wiper Insert
Wiper Insert
- N (316)
insertGeometry
Insert IC Size
Insert IC Size
- 6.35 mm(34)
- 9.525 mm(180)
- 12.7 mm(85)
- 15.875 mm(15)
- 19.05 mm(2)
до
Insert IC Size
Insert IC Size
- 0.25 in(34)
- 0.375 in(180)
- 0.5 in(85)
- 0.625 in(15)
- 0.75 in(2)
до
Cutting Edge Length
Cutting Edge Length
- 10.999 mm(4)
- 11.0 mm(30)
- 13.891 mm(5)
- 16.498 mm(47)
- 16.5 mm(128)
- 21.997 mm(17)
- 22.0 mm(68)
- 27.496 mm(15)
- 33.0 mm(2)
до
Cutting Edge Length
Cutting Edge Length
- 0.433 in(4)
- 0.4331 in(30)
- 0.5469 in(5)
- 0.6195 in(3)
- 0.6495 in(44)
- 0.6496 in(128)
- 0.866 in(20)
- 0.8661 in(62)
- 0.8666 in(3)
- 1.0825 in(15)
- 1.2992 in(2)
до
Chip Breaker CBMD
Chip Breaker CBMD
- 65 (6)
- 8 (2)
- B (2)
- FF (6)
- FP (20)
- FS (4)
- ML (11)
- MP (14)
- MR (18)
- MS (17)
- MU (14)
- RH (24)
- RU (14)
- UF (9)
- UM (14)
- UR (34)
Cutting Tool Material
Cutting Tool Material
- C A (1)
- H T (1)
- H W (315)
Tolerance Class
Tolerance Class
- G (8)
- M (264)
- U (44)
No filters matching ""
