successfully added to cart
View Cart

Высокопроизводительные цельные твердосплавные фрезы • Чистовая обработка

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (215)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (215)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (215)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (215)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (213)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (169)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (132)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (132)
  • M Stainless Steel (213)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (213)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (169)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (132)
  • K Cast Iron (213)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (213)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (169)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (132)
  • N Non-Ferrous Materials (37)
    • N1
      Wrought Aluminum
      (37)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (37)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (27)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (27)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (37)
    • N6
      Carbon, Graphite Composites, CFRP
      (37)
  • S High-Temp Alloys (132)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (132)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (132)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (132)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (132)
  • H Hardened Materials (138)
    • H1
      Hardened Materials 44-48 HRC
      (138)
    • H2
      Hardened Materials 48-55 HRC
      (13)
Select First Choice
  • CN (9)
  • DE (18)
  • GB (8)
  • US (32)
Applications
  • Chamfer Milling Chamfer Milling (300)
  • Countersinking Countersinking (300)
  • Drilling Drilling (91)
  • Face Milling Face Milling (300)
  • Flat Bottom Drilling Flat Bottom Drilling (300)
  • Pipe Thread Pipe Thread (91)
  • Pocket Pocket (300)
  • Pocket Helical Pocket Helical (300)
  • Pocket Milling Pocket Milling (300)
  • Pocket Plunge Milling Pocket Plunge Milling (300)
  • Profile Milling Profile Milling (171)
  • Ramping Ramping (292)
  • Shoulder Ball Nose Shoulder Ball Nose (290)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (91)
  • Shoulder Milling Shoulder Milling (300)
  • Shoulder Roughing Shoulder Roughing (91)
  • Shoulder Square End Shoulder Square End (300)
  • Slot Ball Nose Slot Ball Nose (290)
  • Slot Milling Slot Milling (292)
  • Slot Side Slot Side (300)
  • Slot Square End Slot Square End (290)
  • Slot T Slot T (91)
  • Thread Milling Thread Milling (91)
  • Threading Threading (83)
Cutting Diameter
  • 1.0 (3)
  • 1.5 (3)
  • 2.0 (8)
  • 2.5 (3)
  • 3.0 (17)
  • 3.175 (8)
  • 3.5 (2)
  • 4.0 (20)
  • 4.5 (1)
  • 4.763 (12)
  • 5.0 (17)
  • 6.0 (27)
  • 6.35 (31)
  • 7.0 (3)
  • 7.938 (23)
  • 8.0 (29)
  • 9.0 (1)
  • 9.525 (30)
  • 10.0 (26)
  • 11.113 (10)
  • 12.0 (27)
  • 12.7 (46)
  • 14.0 (22)
  • 15.875 (37)
  • 16.0 (26)
  • 18.0 (18)
  • 19.05 (42)
  • 20.0 (24)
  • 25.0 (1)
  • 25.4 (29)
to
Cutting Diameter
  • 0.039 (1)
  • 0.0394 (2)
  • 0.059 (1)
  • 0.0591 (2)
  • 0.0787 (3)
  • 0.079 (5)
  • 0.0984 (3)
  • 0.118 (14)
  • 0.1181 (3)
  • 0.125 (8)
  • 0.1378 (2)
  • 0.157 (16)
  • 0.1575 (4)
  • 0.1772 (1)
  • 0.1875 (6)
  • 0.188 (6)
  • 0.1969 (3)
  • 0.197 (14)
  • 0.236 (21)
  • 0.2362 (6)
  • 0.25 (31)
  • 0.2756 (1)
  • 0.276 (2)
  • 0.3125 (23)
  • 0.315 (29)
  • 0.3543 (1)
  • 0.375 (30)
  • 0.3937 (6)
  • 0.394 (20)
  • 0.4375 (10)
  • 0.472 (21)
  • 0.4724 (6)
  • 0.5 (46)
  • 0.551 (18)
  • 0.5512 (4)
  • 0.625 (37)
  • 0.6299 (5)
  • 0.63 (21)
  • 0.7087 (4)
  • 0.709 (14)
  • 0.75 (42)
  • 0.787 (20)
  • 0.7874 (4)
  • 0.9843 (1)
  • 1.0 (29)
to
Cutting Length
  • 0.118 (7)
  • 0.1181 (7)
  • 0.157 (7)
  • 0.1575 (2)
  • 0.1969 (2)
  • 0.197 (7)
  • 0.236 (7)
  • 0.25 (2)
  • 0.2756 (2)
  • 0.276 (11)
  • 0.3125 (2)
  • 0.315 (9)
  • 0.354 (7)
  • 0.3543 (1)
  • 0.374 (3)
  • 0.375 (4)
  • 0.3937 (1)
  • 0.394 (11)
  • 0.433 (8)
  • 0.4331 (2)
  • 0.4375 (5)
  • 0.472 (12)
  • 0.4724 (5)
  • 0.5 (20)
  • 0.5118 (3)
  • 0.512 (7)
  • 0.551 (11)
  • 0.5512 (4)
  • 0.5625 (2)
  • 0.625 (19)
  • 0.6299 (4)
  • 0.63 (14)
  • 0.7087 (1)
  • 0.709 (8)
  • 0.748 (13)
  • 0.75 (24)
  • 0.787 (8)
  • 0.7874 (2)
  • 0.8125 (11)
  • 0.866 (18)
  • 0.8661 (5)
  • 0.875 (23)
  • 0.9449 (1)
  • 0.945 (3)
  • 0.984 (2)
  • 0.9843 (2)
  • 1.0 (22)
  • 1.0236 (5)
  • 1.024 (19)
  • 1.125 (9)
  • 1.25 (30)
  • 1.2598 (7)
  • 1.26 (16)
  • 1.496 (9)
  • 1.4961 (4)
  • 1.5 (34)
  • 1.7717 (1)
  • 2.0 (13)
  • 2.25 (31)
  • 3.0 (11)
  • 4.0 (6)
to
Cutting Length
  • 3.0 (14)
  • 4.0 (9)
  • 5.0 (9)
  • 6.0 (7)
  • 6.35 (2)
  • 7.0 (13)
  • 7.938 (2)
  • 8.0 (9)
  • 9.0 (8)
  • 9.5 (3)
  • 9.525 (4)
  • 10.0 (12)
  • 11.0 (10)
  • 11.113 (5)
  • 12.0 (17)
  • 12.7 (20)
  • 13.0 (10)
  • 14.0 (15)
  • 14.288 (2)
  • 15.875 (19)
  • 16.0 (18)
  • 18.0 (9)
  • 19.0 (13)
  • 19.05 (24)
  • 20.0 (10)
  • 20.638 (11)
  • 22.0 (23)
  • 22.225 (23)
  • 24.0 (4)
  • 25.0 (4)
  • 25.4 (22)
  • 26.0 (24)
  • 28.575 (9)
  • 31.75 (30)
  • 32.0 (23)
  • 38.0 (13)
  • 38.1 (34)
  • 45.0 (1)
  • 50.8 (13)
  • 57.15 (31)
  • 76.2 (11)
  • 101.6 (6)
to
Reach
  • 3.0 (12)
  • 4.0 (5)
  • 5.0 (5)
  • 6.0 (4)
  • 7.0 (6)
  • 7.938 (2)
  • 8.0 (4)
  • 9.0 (4)
  • 9.5 (3)
  • 9.525 (4)
  • 10.0 (8)
  • 11.0 (6)
  • 11.113 (5)
  • 12.0 (12)
  • 12.7 (19)
  • 13.0 (9)
  • 14.0 (10)
  • 14.288 (2)
  • 15.875 (18)
  • 16.0 (10)
  • 18.0 (3)
  • 19.0 (10)
  • 19.05 (21)
  • 20.0 (3)
  • 20.638 (11)
  • 22.0 (16)
  • 22.225 (21)
  • 24.0 (4)
  • 25.0 (1)
  • 25.4 (18)
  • 26.0 (20)
  • 28.575 (9)
  • 31.75 (27)
  • 32.0 (13)
  • 35.0 (3)
  • 38.0 (6)
  • 38.1 (28)
  • 40.0 (6)
  • 45.0 (1)
  • 50.0 (3)
  • 50.8 (10)
  • 57.0 (3)
  • 57.15 (24)
  • 60.0 (6)
  • 76.2 (11)
  • 101.6 (6)
to
Reach
  • 0.118 (6)
  • 0.1181 (6)
  • 0.157 (4)
  • 0.1575 (1)
  • 0.1969 (1)
  • 0.197 (4)
  • 0.236 (4)
  • 0.276 (6)
  • 0.3125 (2)
  • 0.315 (4)
  • 0.354 (4)
  • 0.374 (3)
  • 0.375 (4)
  • 0.3937 (1)
  • 0.394 (7)
  • 0.433 (5)
  • 0.4331 (1)
  • 0.4375 (5)
  • 0.472 (8)
  • 0.4724 (4)
  • 0.5 (19)
  • 0.5118 (3)
  • 0.512 (6)
  • 0.551 (6)
  • 0.5512 (4)
  • 0.5625 (2)
  • 0.625 (18)
  • 0.6299 (3)
  • 0.63 (7)
  • 0.7087 (1)
  • 0.709 (2)
  • 0.748 (10)
  • 0.75 (21)
  • 0.787 (2)
  • 0.7874 (1)
  • 0.8125 (11)
  • 0.866 (12)
  • 0.8661 (4)
  • 0.875 (21)
  • 0.9449 (1)
  • 0.945 (3)
  • 0.9843 (1)
  • 1.0 (18)
  • 1.0236 (5)
  • 1.024 (15)
  • 1.125 (9)
  • 1.25 (27)
  • 1.2598 (5)
  • 1.26 (8)
  • 1.378 (3)
  • 1.496 (3)
  • 1.4961 (3)
  • 1.5 (28)
  • 1.5748 (4)
  • 1.575 (2)
  • 1.7717 (1)
  • 1.9685 (2)
  • 1.969 (1)
  • 2.0 (10)
  • 2.244 (1)
  • 2.2441 (2)
  • 2.25 (24)
  • 2.362 (2)
  • 2.3622 (4)
  • 3.0 (11)
  • 4.0 (6)
to
Tool Cutting Edge Angle
  • 90.0 (421)
to
Connection Style
  • Straight-Cylindrical (345)
  • Weldon (201)
cornerConfiguration
Corner Style
  • BALL NOSE (37)
  • CHAMFER (8)
  • RADIUS (61)
  • SQUARE END (336)
Corner Radius
  • 0.0 (421)
  • 0.25 (7)
  • 0.254 (9)
  • 0.45 (27)
  • 0.457 (21)
  • 0.5 (2)
  • 0.75 (2)
  • 0.762 (24)
  • 1.0 (2)
  • 1.5 (3)
  • 2.0 (3)
  • 2.5 (2)
  • 3.0 (3)
  • 4.0 (3)
  • 5.0 (3)
  • 6.0 (3)
  • 7.0 (3)
  • 8.0 (3)
  • 9.0 (3)
  • 10.0 (2)
to
Corner Radius
  • 0.0 (423)
  • 0.0098 (4)
  • 0.01 (12)
  • 0.0177 (10)
  • 0.018 (36)
  • 0.0197 (1)
  • 0.02 (1)
  • 0.0295 (1)
  • 0.03 (25)
  • 0.0393 (1)
  • 0.0394 (1)
  • 0.059 (2)
  • 0.0591 (1)
  • 0.0787 (1)
  • 0.079 (2)
  • 0.098 (1)
  • 0.0984 (1)
  • 0.118 (2)
  • 0.1181 (1)
  • 0.157 (2)
  • 0.1575 (1)
  • 0.1969 (1)
  • 0.197 (2)
  • 0.236 (2)
  • 0.2362 (1)
  • 0.2756 (1)
  • 0.276 (2)
  • 0.315 (3)
  • 0.354 (2)
  • 0.3543 (1)
  • 0.394 (2)
to
Corner Chamfer
  • 0.0 (538)
  • 0.0039 (5)
  • 0.0079 (1)
  • 0.0118 (2)
to
Corner Chamfer
  • 0.0 (538)
  • 0.1 (5)
  • 0.2 (1)
  • 0.3 (2)
to
application
Grade Of Cutting Tool
  • TIALN (36)
  • TIALN-LW (11)
  • TIALN-RJ (14)
  • TIALN-RT (59)
  • TIALN-RW (22)
  • TICN-CT (73)
  • TICN-CW (40)
  • UNCOATED (100)
  • UNCOATEDJJ (4)
  • UNCOATEDWW (18)
  • WP15PE (99)
Hand Of Tool
  • R (546)
Rough Finish
  • F (517)
  • FR (29)
frontEnd
Center Cutting
backEnd
Connection Type
  • CYLINDRICAL (546)
Back-End Diameter
  • 0.125 (8)
  • 0.1575 (11)
  • 0.1875 (12)
  • 0.2362 (90)
  • 0.25 (31)
  • 0.3125 (23)
  • 0.315 (32)
  • 0.375 (30)
  • 0.3937 (27)
  • 0.4375 (10)
  • 0.4724 (27)
  • 0.5 (46)
  • 0.5512 (22)
  • 0.625 (37)
  • 0.6299 (28)
  • 0.7087 (16)
  • 0.75 (42)
  • 0.7874 (24)
  • 0.9843 (1)
  • 1.0 (29)
to
Back-End Diameter
  • 3.175 (8)
  • 4.0 (11)
  • 4.763 (12)
  • 6.0 (90)
  • 6.35 (31)
  • 7.938 (23)
  • 8.0 (32)
  • 9.525 (30)
  • 10.0 (27)
  • 11.113 (10)
  • 12.0 (27)
  • 12.7 (46)
  • 14.0 (22)
  • 15.875 (37)
  • 16.0 (28)
  • 18.0 (16)
  • 19.05 (42)
  • 20.0 (24)
  • 25.0 (1)
  • 25.4 (29)
to
other
Grade
  • TIALN (30)
  • TIALN-LW (11)
  • TIALN-RJ (14)
  • TIALN-RT (77)
  • TIALN-RW (23)
  • TICN-CT (73)
  • TICN-CW (40)
  • UNCOATED (99)
  • UNCOATEDJJ (4)
  • UNCOATEDWW (19)
  • WP15PE (86)
Platform
  • Series 4001 (15)
  • Series 4503 (16)
  • Series 4603 (9)
  • Series 4C03 (15)
  • Series 4C05 (22)
  • Series 4S05/4S07 (20)
  • Series 4S07 (7)
  • Series 4S0F (3)
  • Series D503/D513 (28)
  • Series D507/D517 (17)
  • Series DC03 (6)
  • Vision Plus (10)
Tool Unit
  • I (268)
  • M (278)
Over All Length [L]
  • 38.1 (10)
  • 50.0 (30)
  • 50.8 (33)
  • 54.0 (28)
  • 57.0 (32)
  • 58.0 (18)
  • 63.0 (14)
  • 63.5 (57)
  • 66.0 (11)
  • 72.0 (12)
  • 73.0 (11)
  • 75.0 (11)
  • 76.0 (7)
  • 76.2 (47)
  • 82.0 (11)
  • 83.0 (20)
  • 84.0 (8)
  • 88.9 (18)
  • 89.0 (1)
  • 92.0 (29)
  • 100.0 (9)
  • 101.6 (44)
  • 104.0 (11)
  • 114.3 (11)
  • 121.0 (1)
  • 125.0 (6)
  • 127.0 (37)
  • 133.35 (3)
  • 139.7 (2)
  • 150.0 (8)
  • 158.75 (3)
  • 165.1 (3)
to
Over All Length [L]
  • 1.5 (10)
  • 1.9685 (16)
  • 1.969 (14)
  • 2.0 (33)
  • 2.126 (28)
  • 2.244 (27)
  • 2.2441 (5)
  • 2.283 (15)
  • 2.2835 (3)
  • 2.48 (10)
  • 2.4803 (4)
  • 2.5 (57)
  • 2.598 (9)
  • 2.5984 (2)
  • 2.8346 (3)
  • 2.835 (9)
  • 2.874 (11)
  • 2.9528 (1)
  • 2.953 (10)
  • 2.992 (3)
  • 2.9921 (4)
  • 3.0 (47)
  • 3.228 (10)
  • 3.2283 (1)
  • 3.2677 (4)
  • 3.268 (16)
  • 3.307 (7)
  • 3.3071 (1)
  • 3.5 (18)
  • 3.5039 (1)
  • 3.622 (29)
  • 3.937 (9)
  • 4.0 (44)
  • 4.094 (8)
  • 4.0945 (3)
  • 4.5 (11)
  • 4.7638 (1)
  • 4.921 (4)
  • 4.9213 (2)
  • 5.0 (37)
  • 5.25 (3)
  • 5.5 (2)
  • 5.9055 (2)
  • 5.906 (6)
  • 6.25 (3)
  • 6.5 (3)
to
No filters matching ""
View Products in
Metric
Inch
Высокопроизводительные цельные твердосплавные концевые фрезы • <br />Чистовая обработка

Серия 4503 JJ • Сплавы Victory™
(16 Products)
  • 3857138571
  • Helix Angle: 45°Helix Angle: 45°
  • Corner Style: Square EndCorner Style: Square End
  • 3852638526
  • Slotting: Square EndSlotting: Square End
  • Ramping: BlankRamping: Blank
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Shank - Cylindrical  PlainShank - Cylindrical Plain
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Z] Number of Flutes
5559170 450301001T 450301001T   WP15PE Straight-Cylindrical 1.0000 .0394 4.0 .1575 3.0000 .1181 50.0000 1.968 3
    List price:
    $22.93 /each.
    Your price::
    Qty
    5559171 450301501T 450301501T   WP15PE Straight-Cylindrical 1.5000 .0591 4.0 .1575 3.0000 .1181 50.0000 1.968 3
      List price:
      $22.93 /each.
      Your price::
      Qty
      5559172 450302001T 450302001T   WP15PE Straight-Cylindrical 2.0000 .0787 4.0 .1575 3.0000 .1181 50.0000 1.968 3
        List price:
        $22.93 /each.
        Your price::
        Qty
        5559175 450303002T 450303002T   WP15PE Straight-Cylindrical 3.0000 .1181 6.0 .2362 8.0000 .3150 50.0000 1.968 3
          List price:
          $32.74 /each.
          Your price::
          Qty
          5559177 450304002T 450304002T   WP15PE Straight-Cylindrical 4.0000 .1575 6.0 .2362 12.0000 .4724 50.0000 1.968