Welcome
Please confirm your preferences
Update Preferences

Предложения по продукции

Product Family suggestions

WIDIA At Your Service

Customer Support

Find contact details to customer support centers around the globe.

Quick Order
Позиции успешно добавлено в корзину
View Cart

    Система WMT™ для обработки канавок, отрезки и точения

    Выбрать фильтры
    Фильтры
    Фильтры
      Просмотреть фильтры в
      Метрическая система
      Дюймовая система
      keyFilters
      Workpiece Material
      Workpiece Material
      • P Steel (449)
        • P0
          Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(449)
        • P1
          Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(449)
        • P2
          Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(449)
        • P3
          Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(449)
        • P4
          Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(449)
        • P5
          Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(449)
        • P6
          High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(449)
      • M Stainless Steel (433)
        • M1
          Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(433)
        • M2
          High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(433)
        • M3
          Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(433)
      • K Cast Iron (449)
        • K1
          Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(449)
        • K2
          Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(449)
        • K3
          High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(449)
      • N Non-Ferrous Materials (433)
        • N1
          Wrought Aluminum (433)
        • N2
          Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(433)
        • N3
          High-Silicon Aluminum Alloys Si >12.2%(433)
        • N5
          Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (433)
        • N6
          Carbon, Graphite Composites, CFRP (433)
      • S High-Temp Alloys (433)
        • S1
          Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(433)
        • S2
          Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(433)
        • S3
          Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(433)
        • S4
          Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(433)
      • H Hardened Materials (287)
        • H1
          Hardened Materials 44-48 HRC(287)
        • H2
          Hardened Materials 48-55 HRC(287)
      Select All Star
      • CN (95)
      • DE (203)
      • GB (1)
      • IN (73)
      • SG (11)
      • US (114)
      Applications
      Applications
      • Cut-OffCut-Off (165)
      • Deep GroovingDeep Grooving (14)
      • Face GroovingFace Grooving (229)
      • GroovingGrooving (362)
      • ID GroovingID Grooving (223)
      • ProfilingProfiling (33)
      Cutting Condition
      Cutting Condition
      • Heavily Interrupted Cut (364)
      • Lightly Interrupted Cut (364)
      • Smooth Cut (303)
      • Varying Depth of Cut (303)
      Tool Cutting Edge Angle
      Tool Cutting Edge Angle
      • 90.0 (244)
      Tool Cutting Edge Angle MinдоTool Cutting Edge Angle Max
      Connection Style
      Connection Style
      • Boring Bar Shank (30)
      • Toolholder (177)
      Cutting Edges Per Insert
      Cutting Edges Per Insert
      • 2.0 (424)
      Cutting Edges Per Insert MinдоCutting Edges Per Insert Max
      Internal Coolant Capability
      Internal Coolant Capability
      Over All Length [L]
      Over All Length [L]
      • 1.978 in(1)
      • 1.998 in(2)
      • 2.136 in(2)
      • 2.176 in(2)
      • 2.215 in(14)
      • 2.254 in(2)
      • 2.362 in(2)
      • 2.372 in(10)
      • 2.411 in(2)
      • 3.938 in(13)
      • 4.252 in(1)
      • 4.3 in(2)
      • 4.5 in(13)
      • 4.921 in(34)
      • 4.961 in(3)
      • 5.0 in(31)
      • 5.05 in(4)
      • 5.5 in(2)
      • 5.513 in(2)
      • 5.906 in(53)
      • 5.915 in(2)
      • 5.961 in(4)
      • 6.0 in(29)
      • 7.875 in(4)
      • 8.0 in(4)
      • 9.843 in(8)
      • 10.0 in(7)
      • 11.811 in(3)
      • 11.817 in(1)
      • 12.0 in(3)
      Over All Length [L] MinдоOver All Length [L] Max
      Over All Length [L]
      Over All Length [L]
      • 50.25 mm(1)
      • 50.75 mm(2)
      • 54.25 mm(2)
      • 55.25 mm(2)
      • 56.25 mm(14)
      • 57.25 mm(2)
      • 60.0 mm(2)
      • 60.25 mm(10)
      • 61.25 mm(2)
      • 100.0 mm(13)
      • 108.0 mm(1)
      • 109.226 mm(2)
      • 114.301 mm(13)
      • 125.0 mm(34)
      • 126.0 mm(3)
      • 127.0 mm(31)
      • 128.275 mm(4)
      • 139.701 mm(2)
      • 140.0 mm(2)
      • 150.0 mm(53)
      • 150.25 mm(2)
      • 151.4 mm(4)
      • 152.4 mm(29)
      • 200.0 mm(4)
      • 203.201 mm(4)
      • 250.0 mm(8)
      • 254.0 mm(7)
      • 300.0 mm(3)
      • 300.151 mm(1)
      • 304.8 mm(3)
      Over All Length [L] MinдоOver All Length [L] Max
      cornerConfiguration
      Corner Radius
      Corner Radius
      • 0.003 in(73)
      • 0.005 in(23)
      • 0.006 in(63)
      • 0.007 in(108)
      • 0.01 in(146)
      • 0.012 in(213)
      • 0.015 in(19)
      • 0.023 in(32)
      • 0.024 in(212)
      • 0.03 in(179)
      • 0.06 in(79)
      • 0.079 in(34)
      • 0.08 in(34)
      • 0.095 in(37)
      • 0.098 in(37)
      • 0.099 in(38)
      • 0.119 in(32)
      • 0.12 in(33)
      • 0.125 in(32)
      • 0.156 in(14)
      • 0.157 in(14)
      • 0.158 in(15)
      Corner Radius MinдоCorner Radius Max
      Corner Radius
      Corner Radius
      • 0.076 mm(73)
      • 0.125 mm(23)
      • 0.151 mm(63)
      • 0.176 mm(108)
      • 0.225 mm(57)
      • 0.25 mm(144)
      • 0.301 mm(213)
      • 0.375 mm(19)
      • 0.576 mm(32)
      • 0.601 mm(212)
      • 0.75 mm(179)
      • 1.5 mm(76)
      • 1.526 mm(58)
      • 2.0 mm(34)
      • 2.025 mm(34)
      • 2.401 mm(37)
      • 2.5 mm(37)
      • 2.526 mm(38)
      • 3.0 mm(32)
      • 3.026 mm(33)
      • 3.176 mm(32)
      • 3.95 mm(14)
      • 4.0 mm(14)
      • 4.025 mm(15)
      Corner Radius MinдоCorner Radius Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 mm(259)
      Corner Chamfer MinдоCorner Chamfer Max
      Corner Chamfer
      Corner Chamfer
      • 0.0 in(259)
      Corner Chamfer MinдоCorner Chamfer Max
      application
      Minimum Depth of Cut
      Minimum Depth of Cut
      Minimum Feed
      Minimum Feed
      Grade Of Cutting Tool
      Grade Of Cutting Tool
      • TN6026 (1)
      • WP10CT (217)
      • WP25CT (212)
      • WU10HT (132)
      • WU10PT (287)
      • WU25PT (353)
      Hand Of Tool
      Hand Of Tool
      • L (95)
      • R (112)
      Wiper Insert
      Wiper Insert
      • N (407)
      • Y (155)
      F Dimension
      F Dimension
      • 9.525 mm(5)
      • 10.0 mm(4)
      • 11.951 mm(2)
      • 12.0 mm(7)
      • 12.701 mm(8)
      • 15.851 mm(4)
      • 15.875 mm(6)
      • 15.9 mm(1)
      • 15.951 mm(2)
      • 15.976 mm(2)
      • 16.0 mm(14)
      • 19.05 mm(18)
      • 19.151 mm(2)
      • 19.951 mm(2)
      • 20.0 mm(18)
      • 24.951 mm(1)
      • 25.0 mm(42)
      • 25.151 mm(2)
      • 25.401 mm(19)
      • 25.425 mm(1)
      • 25.451 mm(1)
      • 25.5 mm(3)
      • 26.0 mm(8)
      • 29.0 mm(15)
      • 31.75 mm(4)
      • 32.0 mm(9)
      F Dimension MinдоF Dimension Max
      F Dimension
      F Dimension
      • 0.375 in(5)
      • 0.394 in(4)
      • 0.472 in(2)
      • 0.473 in(7)
      • 0.5 in(8)
      • 0.624 in(4)
      • 0.625 in(6)
      • 0.626 in(1)
      • 0.628 in(2)
      • 0.629 in(2)
      • 0.63 in(14)
      • 0.75 in(18)
      • 0.754 in(2)
      • 0.785 in(2)
      • 0.787 in(18)
      • 0.982 in(1)
      • 0.984 in(42)
      • 0.99 in(2)
      • 1.0 in(19)
      • 1.002 in(2)
      • 1.004 in(3)
      • 1.024 in(8)
      • 1.143 in(15)
      • 1.25 in(4)
      • 1.26 in(9)
      F Dimension MinдоF Dimension Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 30.0 mm(1)
      • 32.0 mm(1)
      • 38.0 mm(6)
      • 40.401 mm(4)
      • 41.0 mm(4)
      • 47.0 mm(15)
      • 52.0 mm(10)
      • 54.0 mm(4)
      • 54.1 mm(3)
      • 69.851 mm(2)
      • 70.0 mm(13)
      • 100.0 mm(17)
      • 101.601 mm(2)
      Minimum Axial Groove Diameter MinдоMinimum Axial Groove Diameter Max
      Minimum Axial Groove Diameter
      Minimum Axial Groove Diameter
      • 1.181 in(1)
      • 1.26 in(1)
      • 1.496 in(6)
      • 1.591 in(4)
      • 1.614 in(4)
      • 1.85 in(15)
      • 2.047 in(10)
      • 2.126 in(4)
      • 2.13 in(3)
      • 2.75 in(2)
      • 2.757 in(13)
      • 3.938 in(17)
      • 4.0 in(2)
      Minimum Axial Groove Diameter MinдоMinimum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 0.787 in(15)
      • 1.024 in(17)
      • 1.062 in(2)
      • 1.125 in(2)
      • 1.25 in(2)
      • 1.26 in(3)
      • 2.047 in(8)
      • 2.757 in(10)
      • 3.938 in(13)
      • 4.0 in(2)
      • 8.0 in(2)
      • 8.071 in(17)
      Maximum Axial Groove Diameter MinдоMaximum Axial Groove Diameter Max
      Maximum Axial Groove Diameter
      Maximum Axial Groove Diameter
      • 20.0 mm(15)
      • 26.0 mm(17)
      • 26.975 mm(2)
      • 28.576 mm(2)
      • 31.75 mm(2)
      • 32.0 mm(3)
      • 52.0 mm(8)
      • 70.0 mm(10)
      • 100.0 mm(13)
      • 101.601 mm(2)
      • 203.201 mm(2)
      • 205.0 mm(17)
      Maximum Axial Groove Diameter MinдоMaximum Axial Groove Diameter Max
      Cutting Direction
      Cutting Direction
      • E (177)
      • S (30)
      Rake Angle Style
      Rake Angle Style
      • NEGATIVE-ZERO (30)
      • NEUTRAL (ZERO) (1)
      Maximum Bore Depth
      Maximum Bore Depth
      • 1.969 in(8)
      • 2.52 in(13)
      • 2.535 in(2)
      • 3.15 in(3)
      • 3.307 in(2)
      • 3.323 in(2)
      Maximum Bore Depth MinдоMaximum Bore Depth Max
      Maximum Bore Depth
      Maximum Bore Depth
      • 50.0 mm(8)
      • 64.0 mm(13)
      • 64.4 mm(2)
      • 80.0 mm(3)
      • 84.0 mm(2)
      • 84.4 mm(2)
      Maximum Bore Depth MinдоMaximum Bore Depth Max
      Boring Bar Material
      Boring Bar Material
      • S (30)
      frontEnd
      Clamp Style
      Clamp Style
      • C (3)
      • S (4)
      • Y (222)
      Cutting Width
      Cutting Width
      • 0.06 in(25)
      • 0.079 in(50)
      • 0.084 in(42)
      • 0.094 in(21)
      • 0.095 in(23)
      • 0.119 in(79)
      • 0.123 in(70)
      • 0.125 in(69)
      • 0.156 in(35)
      • 0.157 in(51)
      • 0.162 in(46)
      • 0.187 in(37)
      • 0.188 in(43)
      • 0.197 in(47)
      • 0.202 in(50)
      • 0.237 in(40)
      • 0.241 in(45)
      • 0.249 in(32)
      • 0.25 in(38)
      • 0.312 in(16)
      • 0.313 in(14)
      • 0.315 in(19)
      • 0.32 in(27)
      Cutting Width MinдоCutting Width Max
      Cutting Width
      Cutting Width
      • 1.5 mm(25)
      • 2.0 mm(50)
      • 2.125 mm(42)
      • 2.375 mm(21)
      • 2.401 mm(23)
      • 3.0 mm(79)
      • 3.125 mm(70)
      • 3.176 mm(69)
      • 3.95 mm(35)
      • 4.0 mm(51)
      • 4.125 mm(46)
      • 4.75 mm(37)
      • 4.775 mm(43)
      • 5.0 mm(47)
      • 5.125 mm(50)
      • 6.0 mm(40)
      • 6.125 mm(45)
      • 6.325 mm(32)
      • 6.351 mm(38)
      • 7.926 mm(16)
      • 7.95 mm(14)
      • 8.0 mm(19)
      • 8.125 mm(27)
      Cutting Width MinдоCutting Width Max
      Insert Shape
      Insert Shape
      • PRISMATIC (466)
      Insert Size
      Insert Size
      • 1 (18)
      • 2 (32)
      • 2B (18)
      • 3 (45)
      • 4 (27)
      • 5 (29)
      • 6 (23)
      • 8 (12)
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 0.394 in(15)
      • 0.42 in(3)
      • 0.433 in(11)
      • 0.44 in(8)
      • 0.492 in(1)
      • 0.5 in(3)
      • 0.512 in(21)
      • 0.531 in(2)
      • 0.551 in(13)
      • 0.56 in(9)
      • 0.564 in(2)
      • 0.61 in(2)
      • 0.625 in(14)
      • 0.63 in(15)
      • 0.65 in(18)
      • 0.728 in(2)
      • 0.748 in(24)
      • 0.75 in(18)
      • 0.866 in(27)
      • 0.875 in(8)
      • 0.945 in(5)
      • 0.984 in(12)
      • 1.0 in(11)
      Maximum Cutting Depth MinдоMaximum Cutting Depth Max
      Maximum Cutting Depth
      Maximum Cutting Depth
      • 10.0 mm(15)
      • 10.675 mm(3)
      • 11.0 mm(11)
      • 11.175 mm(8)
      • 12.5 mm(1)
      • 12.701 mm(3)
      • 13.0 mm(21)
      • 13.5 mm(2)
      • 14.0 mm(13)
      • 14.226 mm(9)
      • 14.3 mm(2)
      • 15.5 mm(2)
      • 15.875 mm(14)
      • 16.0 mm(15)
      • 16.5 mm(18)
      • 18.5 mm(2)
      • 19.0 mm(24)
      • 19.05 mm(18)
      • 22.0 mm(27)
      • 22.225 mm(8)
      • 23.975 mm(5)
      • 25.0 mm(12)
      • 25.401 mm(11)
      Maximum Cutting Depth MinдоMaximum Cutting Depth Max
      Gage Length
      Gage Length
      • 4.252 in(1)
      • 4.3 in(2)
      • 4.961 in(3)
      • 5.05 in(4)
      • 5.482 in(2)
      • 5.529 in(4)
      Gage Length
      Gage Length
      • 126 mm(3)
      • 108 mm(1)
      • 109.226 mm(2)
      • 128.275 mm(4)
      • 139.25 mm(2)
      • 140.4 mm(4)
      insertGeometry
      Shape
      Shape
      • PRISMATIC (222)
      Insert Seat Size
      Insert Seat Size
      • 1 (5)
      • 2 (15)
      • 2B (10)
      • 3 (53)
      • 4 (39)
      • 5 (37)
      • 6 (35)
      • 8 (28)
      Cutting Tool Material
      Cutting Tool Material
      • H W (459)
      backEnd
      Connection Type
      Connection Type
      • BORING BAR (30)
      • SQUARE SHANK (172)
      Back-End Diameter
      Back-End Diameter
      • 25.0 mm(4)
      • 25.401 mm(4)
      • 31.701 mm(1)
      • 31.75 mm(6)
      • 32.0 mm(8)
      • 38.1 mm(3)
      • 40.0 mm(4)
      Back-End Diameter MinдоBack-End Diameter Max
      Back-End Diameter
      Back-End Diameter
      • 0.984 in(4)
      • 1.0 in(4)
      • 1.248 in(1)
      • 1.25 in(6)
      • 1.26 in(8)
      • 1.5 in(3)
      • 1.575 in(4)
      Back-End Diameter MinдоBack-End Diameter Max
      Shank Height
      Shank Height
      • 0.375 in(5)
      • 0.394 in(4)
      • 0.473 in(9)
      • 0.5 in(8)
      • 0.625 in(13)
      • 0.63 in(16)
      • 0.75 in(20)
      • 0.787 in(20)
      • 0.978 in(10)
      • 0.984 in(39)
      • 0.99 in(4)
      • 1.0 in(23)
      • 1.25 in(2)
      • 1.26 in(4)
      Shank Height MinдоShank Height Max
      Shank Height
      Shank Height
      • 9.525 mm(5)
      • 10.0 mm(4)
      • 12.0 mm(9)
      • 12.701 mm(8)
      • 15.875 mm(13)
      • 16.0 mm(16)
      • 19.05 mm(20)
      • 20.0 mm(20)
      • 24.85 mm(10)
      • 25.0 mm(39)
      • 25.151 mm(4)
      • 25.401 mm(23)
      • 31.75 mm(2)
      • 32.0 mm(4)
      Shank Height MinдоShank Height Max
      Shank Width
      Shank Width
      • 0.375 in(5)
      • 0.394 in(4)
      • 0.461 in(2)
      • 0.473 in(7)
      • 0.5 in(8)
      • 0.624 in(4)
      • 0.625 in(13)
      • 0.63 in(12)
      • 0.75 in(20)
      • 0.781 in(3)
      • 0.787 in(17)
      • 0.978 in(10)
      • 0.984 in(38)
      • 0.99 in(4)
      • 1.0 in(24)
      • 1.207 in(1)
      • 1.25 in(1)
      • 1.26 in(4)
      Shank Width MinдоShank Width Max
      Shank Width
      Shank Width
      • 9.525 mm(5)
      • 10.0 mm(4)
      • 11.701 mm(2)
      • 12.0 mm(7)
      • 12.701 mm(8)
      • 15.851 mm(4)
      • 15.875 mm(13)
      • 16.0 mm(12)
      • 19.05 mm(20)
      • 19.85 mm(3)
      • 20.0 mm(17)
      • 24.85 mm(10)
      • 25.0 mm(38)
      • 25.151 mm(4)
      • 25.401 mm(24)
      • 30.651 mm(1)
      • 31.75 mm(1)
      • 32.0 mm(4)
      Shank Width MinдоShank Width Max
      No filters matching ""

      Модульные режущие пластины WMT

      (37)Модульные режущие пластины WMT

      Цельные патроны

      (207)Цельные патроны

      Пластины WMT

      (222)Пластины WMT

      Модульные державки

      (16)Модульные державки
      Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
      product-image
      Please adjust the following properties from

      Номер по каталогу ISO

      Номер по каталогу ANSI

      to find similar products.

      The following files are available

      Please select a file to download

      Models

      Product data

      I have read and accepted the Terms & Conditions of use

      Can’t find the file type you’re looking for?

      Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
      Session expired due to inactivity, please login again
      Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
      товар(-ы) успешно добавлен(-ы) в корзину
      Показать корзину

      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

      Minimum quantity should be

      SAP Material NumberНомер по каталогу ISOСплав  

      You are about to leave the Solution building process.

      Are you sure you want to leave?