Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Серия GT

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (467)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (387)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (413)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (413)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (190)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (54)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (190)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (54)
  • M Stainless Steel (388)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (352)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (155)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (161)
  • K Cast Iron (78)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (78)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (78)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (34)
  • N Non-Ferrous Materials (241)
    • N1
      Wrought Aluminum
      (163)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (241)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (66)
  • S High-Temp Alloys (711)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (160)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (361)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (361)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (190)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (10)
Select First Choice
  • US (114)
Applications
  • Pipe Thread Pipe Thread (1394)
  • Pre-Condition Pre-Condition (1394)
  • Tapping Blind Hole Tapping Blind Hole (1394)
  • Tapping Through Hole Tapping Through Hole (1394)
  • Threading Threading (1394)
Cutting Length
  • 0.16 (2)
  • 0.236 (5)
  • 0.276 (5)
  • 0.31 (56)
  • 0.315 (7)
  • 0.32 (15)
  • 0.35 (6)
  • 0.36 (50)
  • 0.39 (58)
  • 0.3937 (4)
  • 0.394 (20)
  • 0.4 (8)
  • 0.41 (2)
  • 0.42 (2)
  • 0.43 (8)
  • 0.433 (6)
  • 0.44 (92)
  • 0.46 (12)
  • 0.47 (84)
  • 0.48 (18)
  • 0.49 (74)
  • 0.5 (8)
  • 0.51 (43)
  • 0.5118 (2)
  • 0.512 (6)
  • 0.52 (7)
  • 0.53 (20)
  • 0.55 (25)
  • 0.551 (8)
  • 0.56 (32)
  • 0.58 (1)
  • 0.59 (100)
  • 0.5906 (2)
  • 0.591 (29)
  • 0.6 (52)
  • 0.63 (55)
  • 0.669 (8)
  • 0.7087 (3)
  • 0.709 (10)
  • 0.71 (104)
  • 0.75 (12)
  • 0.77 (67)
  • 0.787 (7)
  • 0.7874 (1)
  • 0.79 (69)
  • 0.83 (15)
  • 0.866 (23)
  • 0.91 (44)
  • 0.945 (6)
  • 0.98 (33)
  • 0.984 (3)
  • 1.0 (23)
  • 1.024 (4)
  • 1.063 (5)
  • 1.18 (5)
  • 1.181 (2)
  • 1.25 (4)
  • 1.26 (4)
  • 1.31 (4)
  • 1.38 (6)
  • 1.57 (3)
  • 1.59 (2)
  • 1.77 (3)
to
Cutting Length
  • 6.0 (5)
  • 7.0 (5)
  • 7.9 (44)
  • 8.0 (24)
  • 8.1 (11)
  • 9.0 (9)
  • 9.1 (46)
  • 10.0 (90)
  • 10.5 (2)
  • 10.8 (2)
  • 10.9 (2)
  • 11.0 (12)
  • 11.1 (77)
  • 11.2 (15)
  • 11.6 (12)
  • 11.8 (11)
  • 11.9 (5)
  • 12.0 (70)
  • 12.1 (15)
  • 12.2 (3)
  • 12.4 (74)
  • 12.7 (8)
  • 13.0 (51)
  • 13.1 (7)
  • 13.4 (20)
  • 14.0 (33)
  • 14.2 (32)
  • 14.9 (1)
  • 15.0 (108)
  • 15.1 (63)
  • 15.2 (12)
  • 16.0 (55)
  • 17.0 (8)
  • 18.0 (117)
  • 19.0 (12)
  • 19.6 (67)
  • 20.0 (77)
  • 21.0 (9)
  • 21.1 (6)
  • 22.0 (23)
  • 23.0 (16)
  • 23.1 (28)
  • 24.0 (6)
  • 25.0 (36)
  • 25.4 (23)
  • 26.0 (4)
  • 27.0 (5)
  • 30.0 (7)
  • 31.8 (4)
  • 32.0 (4)
  • 33.3 (4)
  • 35.0 (6)
  • 40.0 (3)
  • 40.4 (2)
  • 45.0 (3)
to
Thread Tolerance Class ANSI
  • 2BX (50)
  • 3BX (118)
Thread Tolerance Class ISO
  • 6H-I (53)
  • 6HX-I (339)
Tap PD Class
  • D10 (4)
  • D11 (12)
  • D12 (8)
  • D3 (19)
  • D4 (26)
  • D5 (54)
  • D6 (32)
  • D7 (2)
  • D8 (4)
  • D9 (24)
  • H10 (16)
  • H2 (74)
  • H3 (217)
  • H4 (65)
  • H5 (166)
  • H6 (26)
  • H7 (85)
Connection Style
  • Cylindrical with Drive Square (1376)
Number of Flutes
  • 2 (133)
  • 3 (792)
  • 4 (181)
  • 5 (34)
  • 6 (5)
Internal Coolant Capability
application
Coating
  • CrC/C (125)
  • Oxide (2)
  • TiCN (161)
  • Uncoated (1)
Grade Of Cutting Tool
  • GP6505 (30)
  • GP6520 (1)
  • WH36MG (18)
  • WN35MG (14)
  • WN38MG (26)
  • WN44EG (120)
  • WN48EG (17)
  • WP31MG (62)
  • WS30MG (79)
  • WS32MG (30)
  • WS34MG (222)
  • WS39MG (196)
  • WU32MG (579)
Hand Of Tool
  • R (1394)
Tap Standard
  • ANSI (684)
  • DIN 2174 (52)
  • DIN 371 (130)
  • DIN 374 (72)
  • DIN 376 (104)
  • DIN-ANSI (326)
Tap Type
  • 11 (33)
  • 13 (88)
  • 3 (249)
  • 8 (1024)
frontEnd
Thread TPI
  • 8.0 (4)
  • 10.0 (25)
  • 11.0 (28)
  • 13.0 (42)
  • 14.0 (35)
  • 16.0 (67)
  • 18.0 (71)
  • 20.0 (129)
  • 24.0 (133)
  • 28.0 (59)
  • 32.0 (139)
  • 36.0 (6)
  • 40.0 (50)
  • 48.0 (9)
  • 56.0 (19)
  • 80.0 (1)
to
Thread TPI
  • 8.0 (4)
  • 10.0 (25)
  • 11.0 (28)
  • 13.0 (42)
  • 14.0 (35)
  • 16.0 (67)
  • 18.0 (71)
  • 20.0 (129)
  • 24.0 (133)
  • 28.0 (59)
  • 32.0 (139)
  • 36.0 (6)
  • 40.0 (50)
  • 48.0 (9)
  • 56.0 (19)
  • 80.0 (1)
to
Thread Pitch
  • 0.45 (8)
  • 0.5 (33)
  • 0.6 (8)
  • 0.7 (34)
  • 0.8 (44)
  • 1.0 (100)
  • 1.25 (85)
  • 1.5 (121)
  • 1.75 (48)
  • 2.0 (55)
  • 2.5 (24)
  • 3.0 (5)
  • 3.5 (6)
  • 4.0 (3)
  • 4.5 (3)
to
Thread Pitch
  • 0.45 (8)
  • 0.5 (33)
  • 0.6 (8)
  • 0.7 (34)
  • 0.8 (44)
  • 1.0 (100)
  • 1.25 (85)
  • 1.5 (121)
  • 1.75 (48)
  • 2.0 (55)
  • 2.5 (24)
  • 3.0 (5)
  • 3.5 (6)
  • 4.0 (3)
  • 4.5 (3)
to
Chamfer Form
  • FB (202)
  • PC (583)
  • SB (609)
backEnd
Connection Type
  • CYLINDRICAL (1394)
Back-End Diameter
  • 0.1378 (15)
  • 0.138 (1)
  • 0.141 (156)
  • 0.1417 (2)
  • 0.168 (66)
  • 0.177 (1)
  • 0.1772 (17)
  • 0.194 (93)
  • 0.22 (2)
  • 0.236 (2)
  • 0.2362 (62)
  • 0.255 (128)
  • 0.2756 (14)
  • 0.315 (34)
  • 0.318 (147)
  • 0.323 (74)
  • 0.3543 (50)
  • 0.367 (118)
  • 0.381 (135)
  • 0.3937 (35)
  • 0.394 (1)
  • 0.429 (14)
  • 0.4331 (37)
  • 0.4724 (42)
  • 0.48 (56)
  • 0.5512 (14)
  • 0.59 (41)
  • 0.6299 (13)
  • 0.7087 (8)
  • 0.8 (4)
  • 0.8661 (3)
  • 0.9843 (3)
  • 1.1024 (3)
  • 1.2598 (3)
to
Back-End Diameter
  • 3.5 (16)
  • 3.581 (158)
  • 4.267 (66)
  • 4.5 (18)
  • 4.928 (93)
  • 5.588 (2)
  • 6.0 (64)
  • 6.077 (3)
  • 6.477 (128)
  • 7.0 (14)
  • 8.0 (34)
  • 8.077 (144)
  • 8.204 (74)
  • 9.0 (50)
  • 9.322 (118)
  • 9.677 (135)
  • 10.0 (36)
  • 10.897 (14)
  • 11.0 (37)
  • 12.0 (42)
  • 12.192 (56)
  • 14.0 (14)
  • 14.986 (41)
  • 16.0 (13)
  • 18.0 (8)
  • 20.32 (4)
  • 22.0 (3)
  • 25.0 (3)
  • 28.0 (3)
  • 32.0 (3)
to
other
Grade
  • GM6515 (105)
  • GP6505 (30)
  • GP6520 (162)
  • WH36MG (18)
  • WN35MG (14)
  • WN38MG (26)
  • WN44EG (120)
  • WN48EG (17)
  • WP31MG (62)
  • WS30MG (79)
  • WS32MG (30)
  • WS34MG (117)
  • WS39MG (196)
  • WU32MG (418)
Platform
  • GT Series (1394)
Tool Unit
  • I (835)
  • M (559)
Over All Length [L]
  • 41.3 (1)
  • 44.45 (4)
  • 44.5 (9)
  • 44.6 (2)
  • 45.0 (3)
  • 46.1 (10)
  • 47.6 (15)
  • 47.7 (11)
  • 47.752 (4)
  • 47.8 (2)
  • 49.2 (4)
  • 49.276 (1)
  • 49.3 (10)
  • 49.4 (2)
  • 50.0 (2)
  • 50.5 (7)
  • 50.6 (12)
  • 50.7 (7)
  • 50.8 (14)
  • 51.5 (9)
  • 53.8 (18)
  • 53.9 (11)
  • 54.0 (10)
  • 54.1 (6)
  • 54.102 (1)
  • 54.9 (8)
  • 56.0 (42)
  • 56.5 (2)
  • 60.0 (1)
  • 60.1 (5)
  • 60.2 (19)
  • 60.3 (13)
  • 60.4 (17)
  • 60.452 (8)
  • 60.5 (4)
  • 61.4 (10)
  • 63.0 (30)
  • 63.3 (4)
  • 63.4 (33)
  • 63.5 (38)
  • 63.7 (2)
  • 63.8 (14)
  • 68.7 (9)
  • 68.8 (1)
  • 68.9 (1)
  • 69.0 (54)
  • 69.088 (1)
  • 69.1 (4)
  • 69.2 (10)
  • 69.3 (16)
  • 69.5 (1)
  • 70.0 (43)
  • 70.3 (1)
  • 70.4 (1)
  • 70.7 (2)
  • 74.3 (16)
  • 74.5 (40)
  • 74.6 (16)
  • 74.676 (1)
  • 74.7 (2)
  • 74.9 (16)
  • 80.0 (66)
  • 80.3 (44)
  • 80.4 (2)
  • 80.9 (2)
  • 85.852 (1)
  • 85.9 (65)
  • 90.0 (95)
  • 90.5 (2)
  • 90.9 (1)
  • 91.0 (1)
  • 91.2 (6)
  • 96.8 (32)
  • 100.0 (161)
  • 100.1 (7)
  • 100.4 (1)
  • 101.1 (2)
  • 108.0 (25)
  • 110.0 (157)
  • 125.0 (26)
  • 130.0 (1)
  • 130.3 (3)
  • 140.0 (16)
  • 160.0 (5)
  • 180.0 (6)
  • 200.0 (6)
  • 858.52 (1)
to
Over All Length [L]
  • 1.63 (1)
  • 1.75 (15)
  • 1.77 (3)
  • 1.81 (10)
  • 1.88 (32)
  • 1.94 (15)
  • 1.95 (2)
  • 1.97 (2)
  • 1.99 (26)
  • 2.0 (14)
  • 2.03 (9)
  • 2.12 (29)
  • 2.13 (17)
  • 2.16 (8)
  • 2.2 (24)
  • 2.205 (11)
  • 2.21 (7)
  • 2.22 (2)
  • 2.36 (1)
  • 2.37 (37)
  • 2.38 (29)
  • 2.4 (2)
  • 2.42 (10)
  • 2.48 (30)
  • 2.49 (4)
  • 2.5 (71)
  • 2.51 (16)
  • 2.7 (5)
  • 2.71 (6)
  • 2.72 (67)
  • 2.73 (19)
  • 2.7559 (2)
  • 2.756 (13)
  • 2.76 (28)
  • 2.77 (2)
  • 2.78 (2)
  • 2.92 (12)
  • 2.93 (22)
  • 2.94 (39)
  • 2.95 (16)
  • 3.1496 (2)
  • 3.15 (64)
  • 3.16 (46)
  • 3.18 (2)
  • 3.38 (67)
  • 3.54 (55)
  • 3.543 (30)
  • 3.5433 (2)
  • 3.55 (8)
  • 3.56 (2)
  • 3.58 (2)
  • 3.59 (6)
  • 3.81 (32)
  • 3.937 (52)
  • 3.94 (116)
  • 3.95 (1)
  • 3.98 (2)
  • 4.25 (25)
  • 4.33 (122)
  • 4.3307 (4)
  • 4.331 (31)
  • 4.92 (23)
  • 4.921 (3)
  • 5.12 (1)
  • 5.13 (3)
  • 5.51 (10)
  • 5.512 (6)
  • 6.3 (5)
  • 7.09 (6)
  • 7.87 (6)
to
Category Path
No filters matching ""
View Products in
Metric
Inch
Высокопроизводительные метчики

Метчики Victory™ из быстрорежущей стали HSS-E-PM с винтовыми канавками • Сквозные отверстия
(18 Products)
  • Tapping: Through HoleTapping: Through Hole
  • HSS-E-PMHSS-E-PM
  • Chamfer Form D (3.5–5)Chamfer Form D (3.5–5)
  • Tapping Helix Angle: 0°Tapping Helix Angle: 0°
  • DIN number 371DIN number 371
  • DIN number 374DIN number 374
  • DIN number 376DIN number 376
  • Flood Coolant: TappingFlood Coolant: Tapping
  • Class of Fit: 6HXClass of Fit: 6HX
  • Manufacturer’s Specs: MManufacturer’s Specs: M
  • Manufacturer’s Specs: MFManufacturer’s Specs: MF
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
4153759 GT005011 GT005011   WP31MG M20 X 2,5 140.0000 5.512 32.0000 1.260     16.0 .6299 4 DIN 376 6HX-I
    List price:
    $151.10 /each.
    Your price::
    4153679 GT005001 GT005001   WP31MG M3 X 0,5 56.0000 2.205 11.0000 .4330 18.0000 .7090 3.5 .138 2 DIN 371 6HX-I
      List price:
      $45.10 /each.
      Your price::
      4153680 GT005002 GT005002   WP31MG M4 X 0,7 63.0000 2.480 13.0000 .5120 21.0000 .8270 4.5 .177 2 DIN 371 6HX-I
        List price:
        $62.78 /each.
        Your price::
        4153681 GT005003 GT005003   WP31MG M5 X 0,8 70.0000 2.756 15.0000 .5910 25.0000 .9840 6.0 .236 2 DIN 371 6HX-I
          List price:
          $47.83 /each.
          Your price::
          4153682 GT005004 GT005004   WP31MG M6 X 1 80.0000 3.150 17.0000 .6690 30.0000 1.181 6.0 .236 3 DIN 371 6HX-I
            List price:
            $54.89 /each.
            Your price::
            4153753 GT005005 GT005005   WP31MG M8 X 1,25 90.0000 3.543 20.0000 .7870 35.0000 1.378 8.0 .315 3 DIN 371 6HX-I
              List price:
              $59.94 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Высокопроизводительные метчики

              Метчики Victory™ из быстрорежущей стали HSS-E-PM с винтовыми канавками • Глухие отверстия
              (18 Products)
              • Threading: Blind HoleThreading: Blind Hole
              • HSS-E-PMHSS-E-PM
              • Chamfer Form C (2–3)Chamfer Form C (2–3)
              • Tapping Helix Angle: 25°Tapping Helix Angle: 25°
              • DIN number 371DIN number 371
              • DIN number 374DIN number 374
              • DIN number 376DIN number 376
              • Flood Coolant: TappingFlood Coolant: Tapping
              • Class of Fit: 6HClass of Fit: 6H
              • Manufacturer’s Specs: MManufacturer’s Specs: M
              • Manufacturer’s Specs: MFManufacturer’s Specs: MF
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
              4152642 GT025005 GT025005   WP31MG M8 X 1,25 90.0000 3.543 20.0000 .7870 35.0000 .7870 8.0 .315 3 DIN 371 6H-I
                List price:
                $45.00 /each.
                Your price::
                4152638 GT025001 GT025001   WP31MG M3 X 0,5 56.0000 2.205 11.0000 .4330 18.0000 .4330 3.5 .1378 3 DIN 371 6H-I
                  List price:
                  $35.44 /each.
                  Your price::
                  4152639 GT025002 GT025002   WP31MG M4 X 0,7 63.0000 2.480 13.0000 .5120 21.0000 .5120 4.5 .1772 3 DIN 371 6H-I
                    List price:
                    $46.26 /each.
                    Your price::
                    4152640 GT025003 GT025003   WP31MG M5 X 0,8 70.0000 2.756 15.0000 .5910 25.0000 .5910 6.0 .2362 3 DIN 371 6H-I
                      List price:
                      $37.95 /each.
                      Your price::
                      4152641 GT025004 GT025004   WP31MG M6 X 1 80.0000 3.150 17.0000 .6690 30.0000 .6690 6.0 .2362 3 DIN 371 6H-I
                        List price:
                        $39.23 /each.
                        Your price::
                        4152703 GT025006 GT025006   WP31MG M10 X 1,5 100.0000 3.937 22.0000 .8660 39.1000 .8660 10.0 .3937 3 DIN 371 6H-I
                          List price:
                          $54.37 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Высокопроизводительные метчики

                          Метчики с заглушкой заборной части с винтовыми канавками из быстрорежущей стали К-нержавеющая сталь для сквозных отверстий
                          (76 Products)
                          • Tapping: Through HoleTapping: Through Hole
                          • HSS-E-PMHSS-E-PM
                          • Chamfer Form D (3.5–5)Chamfer Form D (3.5–5)
                          • Tapping Helix Angle: L15°Tapping Helix Angle: L15°
                          • Flood Coolant: TappingFlood Coolant: Tapping
                          • Class of Fit: 6HXClass of Fit: 6HX
                          • Manufacturer’s Specs: ANSIManufacturer’s Specs: ANSI
                          • Manufacturer’s Specs: MManufacturer’s Specs: M
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes
                          3955285 GT205013 GT205013   WS34MG 1/4 - 20 63.5000 2.500 11.1000 .4400 25.5000 1.000 6.477 .255 3
                            List price:
                            $33.15 /each.
                            Your price::
                            3954988 GT205042 GT205042   WU32MG 1/4 - 20 63.5000 2.500 11.1000 .4400 25.5000 1.000 6.477 .255 3