Серия M4000

Выбрать фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (36)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (36)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (36)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (36)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (36)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (36)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (36)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (36)
  • M Stainless Steel (36)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (36)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (36)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (36)
  • K Cast Iron (36)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (36)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (36)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (36)
  • N Non-Ferrous Materials (35)
    • N1
      Wrought Aluminum (35)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (35)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (35)
  • S High-Temp Alloys (36)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (35)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (35)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (35)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (36)
  • H Hardened Materials (34)
    • H1
      Hardened Materials 44-48 HRC (34)
    • H2
      Hardened Materials 48-55 HRC (21)
    • H3
      Hardened Materials 56-60 HRC (21)
Applications
Applications
  • Chamfer Milling Chamfer Milling (4)
  • Face Milling Face Milling (36)
  • Shoulder Milling Shoulder Milling (5)
Cutting Diameter
Cutting Diameter
  • 4.921 in (2)
  • 6.0 in (2)
  • 6.299 in (2)
  • 7.875 in (2)
  • 9.843 in (2)
  • 12.0 in (2)
  • 12.403 in (2)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 125.0 mm (2)
  • 152.4 mm (2)
  • 160.0 mm (2)
  • 200.0 mm (2)
  • 250.0 mm (2)
  • 304.8 mm (2)
  • 315.0 mm (2)
Cutting Diameter Min до Cutting Diameter Max
Cutting Length
Cutting Length
  • 1.0 mm (1)
  • 1.026 mm (1)
  • 3.5 mm (1)
  • 4.351 mm (1)
  • 4.7 mm (1)
  • 4.801 mm (1)
  • 6.0 mm (2)
  • 6.301 mm (1)
  • 8.0 mm (3)
  • 9.0 mm (2)
  • 9.8 mm (1)
  • 10.0 mm (1)
  • 11.5 mm (1)
  • 11.65 mm (1)
  • 12.0 mm (2)
  • 14.0 mm (1)
  • 14.9 mm (1)
  • 15.0 mm (1)
  • 15.9 mm (1)
Cutting Length Min до Cutting Length Max
Cutting Length
Cutting Length
  • 0.039 in (1)
  • 0.04 in (1)
  • 0.138 in (1)
  • 0.171 in (1)
  • 0.185 in (1)
  • 0.189 in (1)
  • 0.237 in (2)
  • 0.248 in (1)
  • 0.315 in (3)
  • 0.354 in (2)
  • 0.386 in (1)
  • 0.394 in (1)
  • 0.453 in (1)
  • 0.459 in (1)
  • 0.473 in (2)
  • 0.551 in (1)
  • 0.587 in (1)
  • 0.591 in (1)
  • 0.626 in (1)
Cutting Length Min до Cutting Length Max
Reach
Reach
  • 2.48 in (6)
  • 2.677 in (2)
  • 3.15 in (6)
Reach Min до Reach Max
Reach
Reach
  • 63.0 mm (6)
  • 68.0 mm (2)
  • 80.0 mm (6)
Reach Min до Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 32.0 (2)
  • 45.0 (6)
  • 58.0 (1)
  • 75.0 (4)
  • 88.85 (1)
  • 89.14 (1)
  • 90.0 (8)
Tool Cutting Edge Angle Min до Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (4)
  • C-Bolt Circle (8)
  • SHCS or RetScrw Or BoltCircle (2)
Number of Flutes
Number of Flutes
  • 10 (1)
  • 12 (3)
  • 14 (1)
  • 16 (2)
  • 18 (1)
  • 22 (2)
  • 6 (1)
  • 8 (3)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.85 in (17)
  • 1.851 in (1)
  • 1.854 in (6)
  • 2.48 in (6)
  • 2.677 in (2)
  • 3.15 in (6)
Over All Length [L] Min до Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 47.0 mm (17)
  • 47.026 mm (1)
  • 47.1 mm (6)
  • 63.0 mm (6)
  • 68.0 mm (2)
  • 80.0 mm (6)
Over All Length [L] Min до Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (21)
  • 0.008 in (15)
  • 0.016 in (19)
  • 0.031 in (21)
  • 0.038 in (15)
  • 0.044 in (15)
  • 0.047 in (26)
  • 0.052 in (16)
  • 0.063 in (24)
  • 0.066 in (15)
  • 0.075 in (15)
  • 0.079 in (18)
  • 0.094 in (14)
  • 0.095 in (17)
  • 0.098 in (15)
  • 0.122 in (15)
  • 0.125 in (15)
  • 0.126 in (20)
  • 0.157 in (16)
  • 0.171 in (16)
  • 0.237 in (15)
  • 0.315 in (15)
  • 1.969 in (14)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (21)
  • 0.2 mm (15)
  • 0.4 mm (19)
  • 0.775 mm (15)
  • 0.8 mm (21)
  • 0.976 mm (15)
  • 1.1 mm (15)
  • 1.201 mm (26)
  • 1.3 mm (16)
  • 1.6 mm (24)
  • 1.675 mm (15)
  • 1.901 mm (15)
  • 2.0 mm (18)
  • 2.375 mm (14)
  • 2.401 mm (17)
  • 2.5 mm (15)
  • 3.1 mm (15)
  • 3.176 mm (15)
  • 3.2 mm (20)
  • 4.0 mm (16)
  • 4.351 mm (16)
  • 6.0 mm (15)
  • 8.0 mm (15)
  • 50.0 mm (14)
Corner Radius Min до Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (35)
  • 0.65 mm (14)
  • 0.701 mm (15)
  • 1.0 mm (15)
  • 1.026 mm (16)
  • 1.401 mm (14)
  • 1.475 mm (15)
  • 1.5 mm (15)
Corner Chamfer Min до Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (35)
  • 0.027 in (14)
  • 0.028 in (15)
  • 0.039 in (15)
  • 0.04 in (16)
  • 0.055 in (14)
  • 0.058 in (15)
  • 0.06 in (15)
Corner Chamfer Min до Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (24)
  • THM-U (20)
  • THR (16)
  • TN2510 (21)
  • TN25M (23)
  • TN450 (25)
  • TN5015 (15)
  • TN5020 (15)
  • TN5505 (15)
  • TN5515 (31)
  • TN6501 (19)
  • TN6502 (15)
  • TN6505 (17)
  • TN6510 (21)
  • TN6520 (22)
  • TN6525 (25)
  • TN6540 (27)
  • TN7015 (15)
  • TN7035 (15)
  • TN7110 (15)
  • TN7135 (15)
  • TN7525 (26)
  • TN7535 (31)
  • TTI25 (24)
  • TTM (18)
  • TTM08 (23)
  • TTR (19)
  • WDN10U (15)
  • WK15CM (35)
  • WK15PM (18)
  • WK25YM (16)
  • WN10HM (16)
  • WN25PM (19)
  • WP25PM (27)
  • WP35CM (36)
  • WP40PM (28)
  • WS30PM (23)
  • WS40PM (26)
  • WU10PM (16)
  • WU20PM (25)
  • WU35PM (18)
Hand Of Tool
Hand Of Tool
  • R (14)
frontEnd
Clamp Style
Clamp Style
  • C (6)
  • S (18)
Insert Shape
Insert Shape
  • H-HEXAGON 120 (20)
  • R-ROUND (15)
  • S-SQUARE 90 (23)
  • T-TRIANGLE 60 (15)
  • X-PARALLELOGRAM 75 (2)
  • X-PARALLELOGRAM 80 (15)
  • X-RECTANGLE MILL 4 90 (17)
Cartridge Size
Cartridge Size
  • 15 - mm of Shank Height M400 (24)
Center Cutting
Center Cutting
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • C N (2)
  • D P (1)
  • H T (10)
  • H W (22)
backEnd
Connection Type
Connection Type
  • SHELL MILL (14)
Back-End Diameter
Back-End Diameter
  • 40.0 mm (4)
  • 50.801 mm (2)
  • 60.0 mm (6)
  • 63.5 mm (2)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.575 in (4)
  • 2.0 in (2)
  • 2.362 in (6)
  • 2.5 in (2)
Back-End Diameter Min до Back-End Diameter Max
No filters matching ""
Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
product-image
Please adjust the following properties from

Номер по каталогу ISO

Номер по каталогу ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
Session expired due to inactivity, please login again
Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
товар(-ы) успешно добавлен(-ы) в корзину

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Номер по каталогу ISO Сплав    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?