Уведомления

Отметить все как прочитанные

VariDrillTM

Надежные цельные твердосплавные сверла превосходят ожидания при обработке различных материалов.

Это цельное твердосплавное сверло характеризуется прогнозируемой стойкостью при обработке любых материалов за счет меньшей вероятности выкрашивания на режущей кромке. Такая геометрия сверла обеспечивает формирование благоприятной стружки и ее беспрепятственный отвод, что приводит к значительному снижению трения и исключает такие проблемы, как пакетирование стружки и образование задиров.

VariDrill — это инструмент, входящий в программу All-Star. 

Закажите инструменты с отправкой в тот же день с All-Star! Узнать больше.

Video
Выбрать фильтры
Filters
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1280)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1280)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1280)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1280)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1280)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1280)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1280)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1280)
  • M Stainless Steel (1280)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1280)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1280)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1280)
  • K Cast Iron (1280)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1280)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1280)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1280)
  • N Non-Ferrous Materials (1280)
    • N1
      Wrought Aluminum
      (1280)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1280)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1280)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1280)
  • S High-Temp Alloys (1280)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1280)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1280)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1280)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1280)
Select All Star
  • CN (199)
  • DE (795)
  • GB (457)
  • IN (123)
  • SG (850)
  • US (488)
Applications
Applications
  • Drilling Drilling (1280)
  • Stacked Plates Drilling Stacked Plates Drilling (1238)
Cutting Diameter
Cutting Diameter
  • 0.044 in (5)
  • 0.047 in (6)
  • 0.055 in (6)
  • 0.06 in (5)
  • 0.063 in (5)
  • 0.067 in (5)
  • 0.072 in (5)
  • 0.075 in (5)
  • 0.078 in (5)
  • 0.079 in (5)
  • 0.083 in (5)
  • 0.088 in (5)
  • 0.091 in (5)
  • 0.094 in (5)
  • 0.095 in (5)
  • 0.096 in (5)
  • 0.098 in (10)
  • 0.101 in (5)
  • 0.103 in (5)
  • 0.105 in (5)
  • 0.106 in (10)
  • 0.109 in (5)
  • 0.11 in (5)
  • 0.111 in (5)
  • 0.113 in (5)
  • 0.114 in (5)
  • 0.116 in (5)
  • 0.119 in (5)
  • 0.12 in (5)
  • 0.122 in (5)
  • 0.125 in (5)
  • 0.126 in (5)
  • 0.129 in (5)
  • 0.13 in (5)
  • 0.134 in (5)
  • 0.136 in (5)
  • 0.138 in (5)
  • 0.142 in (5)
  • 0.143 in (5)
  • 0.145 in (5)
  • 0.146 in (5)
  • 0.147 in (5)
  • 0.15 in (5)
  • 0.154 in (5)
  • 0.156 in (5)
  • 0.157 in (5)
  • 0.159 in (5)
  • 0.161 in (10)
  • 0.165 in (5)
  • 0.166 in (5)
  • 0.169 in (5)
  • 0.173 in (5)
  • 0.174 in (5)
  • 0.177 in (5)
  • 0.181 in (5)
  • 0.182 in (5)
  • 0.185 in (5)
  • 0.188 in (5)
  • 0.189 in (5)
  • 0.191 in (5)
  • 0.193 in (5)
  • 0.197 in (5)
  • 0.201 in (10)
  • 0.203 in (5)
  • 0.206 in (5)
  • 0.209 in (5)
  • 0.213 in (10)
  • 0.217 in (5)
  • 0.219 in (5)
  • 0.221 in (10)
  • 0.224 in (5)
  • 0.228 in (5)
  • 0.232 in (5)
  • 0.234 in (5)
  • 0.237 in (5)
  • 0.24 in (5)
  • 0.244 in (5)
  • 0.248 in (5)
  • 0.25 in (5)
  • 0.252 in (5)
  • 0.256 in (5)
  • 0.257 in (5)
  • 0.26 in (5)
  • 0.261 in (5)
  • 0.264 in (5)
  • 0.266 in (5)
  • 0.268 in (5)
  • 0.272 in (5)
  • 0.276 in (5)
  • 0.28 in (5)
  • 0.281 in (5)
  • 0.284 in (5)
  • 0.288 in (5)
  • 0.291 in (5)
  • 0.453 in (10)
  • 0.47 in (10)
  • 0.484 in (10)
  • 0.516 in (10)
  • 0.547 in (9)
  • 0.564 in (10)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.1 mm (5)
  • 1.201 mm (6)
  • 1.401 mm (6)
  • 1.5 mm (5)
  • 1.6 mm (5)
  • 1.701 mm (5)
  • 1.8 mm (5)
  • 1.901 mm (5)
  • 1.975 mm (5)
  • 2.0 mm (5)
  • 2.1 mm (5)
  • 2.2 mm (5)
  • 2.301 mm (5)
  • 2.375 mm (5)
  • 2.401 mm (5)
  • 2.45 mm (5)
  • 2.5 mm (10)
  • 2.575 mm (5)
  • 2.6 mm (5)
  • 2.651 mm (5)
  • 2.7 mm (10)
  • 2.776 mm (5)
  • 2.801 mm (5)
  • 2.825 mm (5)
  • 2.875 mm (5)
  • 2.901 mm (5)
  • 2.95 mm (5)
  • 3.0 mm (5)
  • 3.051 mm (5)
  • 3.1 mm (5)
  • 3.176 mm (5)
  • 3.2 mm (5)
  • 3.276 mm (5)
  • 3.301 mm (5)
  • 3.401 mm (5)
  • 3.45 mm (5)
  • 3.5 mm (5)
  • 3.575 mm (5)
  • 3.6 mm (5)
  • 3.651 mm (5)
  • 3.7 mm (5)
  • 3.725 mm (5)
  • 3.801 mm (5)
  • 3.901 mm (5)
  • 3.975 mm (5)
  • 4.0 mm (5)
  • 4.05 mm (5)
  • 4.101 mm (10)
  • 4.2 mm (5)
  • 4.226 mm (5)
  • 4.3 mm (5)
  • 4.375 mm (5)
  • 4.4 mm (5)
  • 4.5 mm (5)
  • 4.601 mm (5)
  • 4.625 mm (5)
  • 4.7 mm (5)
  • 4.775 mm (5)
  • 4.801 mm (5)
  • 4.851 mm (5)
  • 4.9 mm (5)
  • 5.0 mm (5)
  • 5.101 mm (10)
  • 5.15 mm (5)
  • 5.2 mm (5)
  • 5.301 mm (5)
  • 5.4 mm (10)
  • 5.5 mm (5)
  • 5.551 mm (5)
  • 5.601 mm (5)
  • 5.625 mm (5)
  • 5.7 mm (5)
  • 5.801 mm (5)
  • 5.9 mm (5)
  • 5.95 mm (5)
  • 6.0 mm (5)
  • 6.101 mm (5)
  • 6.2 mm (5)
  • 6.301 mm (5)
  • 6.351 mm (5)
  • 6.4 mm (5)
  • 6.5 mm (5)
  • 6.525 mm (5)
  • 6.601 mm (5)
  • 6.625 mm (5)
  • 6.7 mm (5)
  • 6.75 mm (5)
  • 6.801 mm (5)
  • 6.9 mm (5)
  • 7.0 mm (5)
  • 7.101 mm (5)
  • 7.15 mm (5)
  • 7.2 mm (5)
  • 7.301 mm (5)
  • 11.5 mm (10)
  • 11.9 mm (10)
  • 12.3 mm (10)
  • 13.101 mm (10)
  • 13.9 mm (9)
  • 14.3 mm (10)
Cutting Diameter Min до Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 5.0 mm (13)
  • 6.0 mm (23)
  • 9.0 mm (10)
  • 10.0 mm (21)
  • 12.0 mm (32)
  • 14.0 mm (40)
  • 15.0 mm (5)
  • 17.0 mm (64)
  • 20.0 mm (42)
  • 22.0 mm (5)
  • 23.0 mm (30)
  • 24.0 mm (28)
  • 25.0 mm (16)
  • 29.0 mm (58)
  • 33.0 mm (15)
  • 35.0 mm (96)
  • 40.0 mm (50)
  • 41.0 mm (16)
  • 43.0 mm (99)
  • 45.0 mm (50)
  • 48.0 mm (21)
  • 49.0 mm (54)
  • 51.0 mm (46)
  • 55.0 mm (46)
  • 56.0 mm (50)
  • 57.0 mm (14)
  • 60.0 mm (46)
  • 63.0 mm (50)
  • 64.0 mm (13)
  • 68.0 mm (1)
  • 71.0 mm (43)
  • 77.0 mm (39)
  • 80.0 mm (26)
  • 96.0 mm (25)
  • 112.0 mm (23)
  • 128.0 mm (25)
  • 144.0 mm (22)
  • 160.0 mm (23)
Maximum Hole Depth [L4] Min до Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.197 in (13)
  • 0.237 in (23)
  • 0.354 in (10)
  • 0.394 in (21)
  • 0.473 in (32)
  • 0.551 in (40)
  • 0.591 in (5)
  • 0.669 in (64)
  • 0.787 in (42)
  • 0.866 in (5)
  • 0.906 in (30)
  • 0.946 in (28)
  • 0.984 in (16)
  • 1.143 in (58)
  • 1.299 in (15)
  • 1.379 in (96)
  • 1.575 in (50)
  • 1.614 in (16)
  • 1.693 in (99)
  • 1.772 in (50)
  • 1.891 in (21)
  • 1.929 in (54)
  • 2.008 in (46)
  • 2.165 in (46)
  • 2.205 in (50)
  • 2.244 in (14)
  • 2.362 in (46)
  • 2.48 in (50)
  • 2.52 in (13)
  • 2.677 in (1)
  • 2.795 in (43)
  • 3.031 in (39)
  • 3.15 in (26)
  • 3.781 in (25)
  • 4.409 in (23)
  • 5.039 in (25)
  • 5.67 in (22)
  • 6.299 in (23)
Maximum Hole Depth [L4] Min до Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.276 in (13)
  • 0.354 in (23)
  • 0.473 in (21)
  • 0.512 in (10)
  • 0.669 in (32)
  • 0.709 in (15)
  • 0.787 in (30)
  • 0.866 in (32)
  • 0.946 in (32)
  • 1.024 in (5)
  • 1.102 in (72)
  • 1.181 in (16)
  • 1.339 in (28)
  • 1.417 in (32)
  • 1.575 in (15)
  • 1.614 in (26)
  • 1.732 in (42)
  • 1.85 in (54)
  • 1.929 in (16)
  • 2.087 in (54)
  • 2.165 in (50)
  • 2.205 in (21)
  • 2.362 in (45)
  • 2.402 in (54)
  • 2.559 in (50)
  • 2.638 in (14)
  • 2.795 in (50)
  • 2.874 in (46)
  • 2.914 in (13)
  • 3.031 in (46)
  • 3.11 in (46)
  • 3.15 in (1)
  • 3.269 in (50)
  • 3.622 in (26)
  • 3.661 in (43)
  • 3.976 in (39)
  • 4.331 in (25)
  • 5.039 in (23)
  • 5.748 in (25)
  • 6.417 in (22)
  • 7.126 in (23)
Reach Min до Reach Max
Reach
Reach
  • 7.0 mm (13)
  • 9.0 mm (23)
  • 12.0 mm (21)
  • 13.0 mm (10)
  • 17.0 mm (32)
  • 18.0 mm (15)
  • 20.0 mm (30)
  • 22.0 mm (32)
  • 24.0 mm (32)
  • 26.0 mm (5)
  • 28.0 mm (72)
  • 30.0 mm (16)
  • 34.0 mm (28)
  • 36.0 mm (32)
  • 40.0 mm (15)
  • 41.0 mm (26)
  • 44.0 mm (42)
  • 47.0 mm (54)
  • 49.0 mm (16)
  • 53.0 mm (54)
  • 55.0 mm (50)
  • 56.0 mm (21)
  • 60.0 mm (45)
  • 61.0 mm (54)
  • 65.0 mm (50)
  • 67.0 mm (14)
  • 71.0 mm (50)
  • 73.0 mm (46)
  • 74.0 mm (13)
  • 77.0 mm (46)
  • 79.0 mm (46)
  • 80.0 mm (1)
  • 83.0 mm (50)
  • 92.0 mm (26)
  • 93.0 mm (43)
  • 101.0 mm (39)
  • 110.0 mm (25)
  • 128.0 mm (23)
  • 146.0 mm (25)
  • 163.0 mm (22)
  • 181.0 mm (23)
Reach Min до Reach Max
Internal Coolant Capability
Internal Coolant Capability
backEnd
Back-End Diameter
Back-End Diameter
  • 4.0 mm (167)
  • 6.0 mm (260)
  • 8.0 mm (135)
  • 10.0 mm (135)
  • 12.0 mm (125)
  • 14.0 mm (114)
  • 16.0 mm (125)
  • 18.0 mm (111)
  • 20.0 mm (108)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.157 in (167)
  • 0.237 in (260)
  • 0.315 in (135)
  • 0.394 in (135)
  • 0.473 in (125)
  • 0.551 in (114)
  • 0.63 in (125)
  • 0.709 in (111)
  • 0.787 in (108)
Back-End Diameter Min до Back-End Diameter Max
No filters matching ""
Показать ассортимент в
Метрическая система
Дюймовая система

ОРИГИНАЛЬНЫЙ ПРОДУКТ

  • DrillingDrilling
  • Drilling Depth: 8xDrilling Depth: 8x
  • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
  • Helix Angle: 30°Helix Angle: 30°
  • 3855038550
  • Drilling - Through CoolantDrilling - Through Coolant
Посмотреть ассортимент
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter M [D1] Drill Diameter M [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L3] Flute Length [L3] Flute Length [L5] Drill Point Length [L5] Drill Point Length [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
4143533 VDS403A15100 VDS403A15100 WU25PD   15.1000 .5945 128.0000 5.039 146.0000 5.748 2.6100 .1028 197.0000 7.755 48.0 1.889 16.0 .6299
    Цена по прейскуранту:
    $472,78 /каждый.
    Ваша цена::
    Кол-во
    4143538 VDS403A15500 VDS403A15500 WU25PD   15.5000 .6102 128.0000 5.039 146.0000 5.748 2.6800 .1055 197.0000 7.755 48.0 1.889 16.0 .6299
      Цена по прейскуранту:
      $472,78 /каждый.
      Ваша цена::
      Кол-во
      4143541 VDS403A15800 VDS403A15800 WU25PD   15.8000 .6220 128.0000 5.039 146.0000 5.748 2.7300 .1075 197.0000 7.755 48.0 1.889 16.0 .6299
        Цена по прейскуранту:
        $472,78 /каждый.
        Ваша цена::
        Кол-во
        4143542 VDS403A15875 VDS403A15875 WU25PD   15.8750 .6250 128.0000 5.039 146.0000 5.748 2.7500 .1083 197.0000 7.755 48.0 1.889 16.0 .6299
          Цена по прейскуранту:
          $472,78 /каждый.
          Ваша цена::
          Кол-во
          4143543 VDS403A15900 VDS403A15900 WU25PD   15.9000 .6260 128.0000 5.039 146.0000 5.748 2.7500 .1083 197.0000 7.755 48.0 1.889 16.0 .6299
            Цена по прейскуранту:
            $472,78 /каждый.
            Ваша цена::
            Кол-во
            4143544 VDS403A16000 VDS403A16000 WU25PD   16.0000 .6299 128.0000 5.039 146.0000 5.748 2.7700 .1091 197.0000 7.755 48.0 1.889 16.0 .6299
              Цена по прейскуранту:
              $472,78 /каждый.
              Ваша цена::
              Кол-во
              Цена по прейскуранту:
              Скидка: %
              Ваша цена::
              Замена Данный товар недоступен
              Продукция для замены Данный товар можно приобрести у дистрибьютора
              Кол-во

              Продается в упаковке из

              ОРИГИНАЛЬНЫЙ ПРОДУКТ

              • DrillingDrilling
              • Drilling Depth: 3xDrilling Depth: 3x
              • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
              • Helix Angle: 30°Helix Angle: 30°
              • 3856338563
              • 3855038550
              • Drilling - Through CoolantDrilling - Through Coolant
              • Flood Coolant: DrillingFlood Coolant: Drilling
              Посмотреть ассортимент
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Drill Diameter M [D1] Drill Diameter M [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L3] Flute Length [L3] Flute Length [L5] Drill Point Length [L5] Drill Point Length [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
              4140270 VDS401A01500 VDS401A01500 WU25PD   Straight-Cylindrical 1.5000 .0591 6.0000 .2362 9.0000 .3543 0.2290 .0090 58.0000 2.283 28.0 1.102 4.0 .1575
                Цена по прейскуранту:
                $59,04 /каждый.
                Ваша цена::
                Кол-во
                4140271 VDS401A01600 VDS401A01600 WU25PD   Straight-Cylindrical 1.6000 .0630 6.0000 .2362 9.0000 .3543 0.2460 .0097 58.0000 2.283 28.0 1.102 4.0 .1575
                  Цена по прейскуранту:
                  $59,04 /каждый.
                  Ваша цена::
                  Кол-во
                  4140272 VDS401A01700 VDS401A01700 WU25PD   Straight-Cylindrical 1.7000 .0669 6.0000 .2362 9.0000 .3543 0.2630 .0103 58.0000 2.283 28.0 1.102 4.0 .1575
                    Цена по прейскуранту:
                    $59,04 /каждый.
                    Ваша цена::
                    Кол-во
                    4140423 VDS401A01800 VDS401A01800 WU25PD   Straight-Cylindrical 1.8000 .0709 6.0000 .2362 9.0000 .3543 0.2800 .0110 58.0000 2.283 28.0 1.102 4.0 .1575
                      Цена по прейскуранту:
                      $58,19 /каждый.
                      Ваша цена::
                      Кол-во
                      4140424 VDS401A01900 VDS401A01900 WU25PD   Straight-Cylindrical 1.9000 .0748 6.0000 .2362 9.0000 .3543 0.2970 .0117 58.0000 2.283 28.0 1.102 4.0 .1575
                        Цена по прейскуранту:
                        $58,19 /каждый.
                        Ваша цена::
                        Кол-во
                        4140426 VDS401A02000 VDS401A02000 WU25PD   Straight-Cylindrical 2.0000 .0787 10.0000 .3937 13.0000 .5118 0.3130 .0123 58.0000 2.283 28.0 1.102 4.0 .1575
                          Цена по прейскуранту:
                          $58,19 /каждый.
                          Ваша цена::
                          Кол-во
                          Цена по прейскуранту:
                          Скидка: %
                          Ваша цена::
                          Замена Данный товар недоступен
                          Продукция для замены Данный товар можно приобрести у дистрибьютора
                          Кол-во

                          Продается в упаковке из

                          ОРИГИНАЛЬНЫЙ ПРОДУКТ

                          • DrillingDrilling
                          • Drilling Depth: 5xDrilling Depth: 5x
                          • Shank - Cylindrical  Plain ≤h6Shank - Cylindrical Plain ≤h6
                          • Helix Angle: 30°Helix Angle: 30°
                          • 3856338563
                          • 3855038550
                          • Drilling - Through CoolantDrilling - Through Coolant
                          • Flood Coolant: DrillingFlood Coolant: Drilling
                          Посмотреть ассортимент
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Drill Diameter M [D1] Drill Diameter M [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L3] Flute Length [L3] Flute Length [L5] Drill Point Length [L5] Drill Point Length [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
                          4142875 VDS402A11500 VDS402A11500 WU25PD   Straight-Cylindrical 11.5000 .4528 56.0000 2.204 71.0000 2.795 1.9700 .0776 118.0000 4.645 45.0 1.771 12.0 .4724
                            Цена по прейскуранту:
                            $145,77 /каждый.
                            Ваша цена::
                            Кол-во