ProGroove™

Выбрать фильтры
Фильтры
    Просмотреть фильтры в
    Метрическая система
    Дюймовая система
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (3)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
    • M Stainless Steel (3)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3)
    • K Cast Iron (3)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3)
    • N Non-Ferrous Materials (3)
      • N1
        Wrought Aluminum (3)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(3)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (3)
      • N6
        Carbon, Graphite Composites, CFRP (3)
      • N7
        MMC's (3)
    • S High-Temp Alloys (3)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
    • H Hardened Materials (2)
      • H1
        Hardened Materials 44-48 HRC(2)
      • H2
        Hardened Materials 48-55 HRC(2)
      • H3
        Hardened Materials 56-60 HRC(2)
      • H4
        Hardened Materials >60 HRC(2)
    Applications
    Applications
    • Cut-OffCut-Off (6)
    • Deep GroovingDeep Grooving (7)
    • GroovingGrooving (4)
    • TurningTurning (1)
    Cutting Condition
    Cutting Condition
    • Lightly Interrupted Cut (2)
    • Smooth Cut (3)
    • Varying Depth of Cut (3)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (9)
    Tool Cutting Edge Angle MinдоTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Toolholder (9)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (10)
    • 3.0 (3)
    Cutting Edges Per Insert MinдоCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.386 in(1)
    • 3.543 in(1)
    • 3.938 in(1)
    • 4.331 in(4)
    • 4.921 in(1)
    • 5.906 in(5)
    • 6.299 in(1)
    • 9.843 in(1)
    Over All Length [L] MinдоOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 86.0 mm(1)
    • 90.0 mm(1)
    • 100.0 mm(1)
    • 110.0 mm(4)
    • 125.0 mm(1)
    • 150.0 mm(5)
    • 160.0 mm(1)
    • 250.0 mm(1)
    Over All Length [L] MinдоOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(5)
    • 0.01 in(4)
    • 0.012 in(5)
    • 0.016 in(2)
    • 0.024 in(1)
    • 0.031 in(3)
    • 0.047 in(3)
    • 0.06 in(2)
    • 0.063 in(1)
    • 0.079 in(2)
    Corner Radius MinдоCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(5)
    • 0.25 mm(4)
    • 0.301 mm(5)
    • 0.4 mm(2)
    • 0.601 mm(1)
    • 0.8 mm(3)
    • 1.201 mm(3)
    • 1.5 mm(2)
    • 1.6 mm(1)
    • 2.0 mm(2)
    Corner Radius MinдоCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(1)
    Corner Chamfer MinдоCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(1)
    Corner Chamfer MinдоCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CG55 (2)
    • CW2015 (2)
    • CW5025 (2)
    • HK1500 (2)
    • HK15M (2)
    • PB100 (2)
    • PB250 (2)
    • RC3503 (2)
    • SP0A00 (2)
    • SPTM00 (2)
    • THM (9)
    • THM X (1)
    • THM-F (2)
    • THM-X (2)
    • THMF-X (2)
    • TN200 (6)
    • TN2000 (2)
    • TN35 (3)
    • TN4000 (2)
    • TN5015 (3)
    • TN5120 (3)
    • TN6030 (7)
    • TN7010 (3)
    • TN7015 (3)
    • TN7025 (3)
    • TN7035 (3)
    • TN7110 (3)
    • TN7115 (3)
    • TN7125 (3)
    • TN7135 (1)
    • TN7525 (6)
    • TN7535 (6)
    • TN8025 (6)
    • TPC25 (6)
    • TPC35 (6)
    • TTI15 (2)
    • TTM08 (3)
    • TTM09 (1)
    • TTMS (2)
    • TTR (3)
    • TTR-X (3)
    • TTS (3)
    • TTX (3)
    • WBH25U (2)
    • WDN25U (3)
    • WK20CT (3)
    • WM35CT (6)
    • WP15CT (3)
    • WP25CT (3)
    • WP35CT (3)
    Hand Of Tool
    Hand Of Tool
    • N (9)
    Wiper Insert
    Wiper Insert
    • N (10)
    F Dimension
    F Dimension
    • 0.0 mm(3)
    • 1.85 mm(1)
    • 2.7 mm(2)
    • 3.6 mm(2)
    • 7.4 mm(1)
    F Dimension MinдоF Dimension Max
    F Dimension
    F Dimension
    • 0.0 in(3)
    • 0.073 in(1)
    • 0.106 in(2)
    • 0.143 in(2)
    • 0.291 in(1)
    F Dimension MinдоF Dimension Max
    Cutting Direction
    Cutting Direction
    • E (9)
    Rake Angle Style
    Rake Angle Style
    • NEUTRAL (ZERO) (6)
    • POSITIVE-ZERO (3)
    frontEnd
    Clamp Style
    Clamp Style
    • C (3)
    • Y (6)
    Cutting Width
    Cutting Width
    • 0.083 in(1)
    • 0.089 in(1)
    • 0.119 in(2)
    • 0.122 in(2)
    • 0.128 in(2)
    • 0.129 in(2)
    • 0.157 in(2)
    • 0.161 in(3)
    • 0.167 in(2)
    • 0.168 in(2)
    • 0.321 in(1)
    Cutting Width MinдоCutting Width Max
    Cutting Width
    Cutting Width
    • 2.1 mm(1)
    • 2.25 mm(1)
    • 3.0 mm(2)
    • 3.1 mm(2)
    • 3.25 mm(2)
    • 3.276 mm(2)
    • 4.0 mm(2)
    • 4.101 mm(3)
    • 4.25 mm(2)
    • 4.275 mm(2)
    • 8.15 mm(1)
    Cutting Width MinдоCutting Width Max
    Insert Shape
    Insert Shape
    • PRISMATIC (7)
    • T-TRIANGLE 60 (3)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.787 in(1)
    • 1.575 in(2)
    • 1.969 in(2)
    • 3.938 in(1)
    Maximum Cutting Depth MinдоMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 20.0 mm(1)
    • 40.0 mm(2)
    • 50.0 mm(2)
    • 100.0 mm(1)
    Maximum Cutting Depth MinдоMaximum Cutting Depth Max
    insertGeometry
    Shape
    Shape
    • PRISMATIC (1)
    Insert Seat Size
    Insert Seat Size
    • 4 (1)
    Cutting Tool Material
    Cutting Tool Material
    • B H (2)
    • C A (2)
    • C N (2)
    • D P (3)
    • H T (2)
    • H W (10)
    backEnd
    Connection Type
    Connection Type
    • SQUARE SHANK (3)
    Shank Height
    Shank Height
    • 0.748 in(1)
    • 0.787 in(1)
    • 0.984 in(2)
    • 1.024 in(2)
    • 1.26 in(2)
    • 2.067 in(1)
    Shank Height MinдоShank Height Max
    Shank Height
    Shank Height
    • 19.0 mm(1)
    • 20.0 mm(1)
    • 25.0 mm(2)
    • 26.0 mm(2)
    • 32.0 mm(2)
    • 52.5 mm(1)
    Shank Height MinдоShank Height Max
    Shank Width
    Shank Width
    • 0.067 in(1)
    • 0.095 in(2)
    • 0.126 in(2)
    • 0.268 in(1)
    • 0.512 in(2)
    • 0.709 in(1)
    Shank Width MinдоShank Width Max
    Shank Width
    Shank Width
    • 1.701 mm(1)
    • 2.401 mm(2)
    • 3.2 mm(2)
    • 6.801 mm(1)
    • 13.0 mm(2)
    • 18.0 mm(1)
    Shank Width MinдоShank Width Max
    No filters matching ""
    Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
    Select the destination where you want to move до.
    Новинка Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Номер по каталогу ISO

    Номер по каталогу ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
    Session expired due to inactivity, please login again
    Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
    товар(-ы) успешно добавлен(-ы) в корзину

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberНомер по каталогу ISOСплав  

    You are about to leave the Solution building process.

    Are you sure you want to leave?