successfully added to cart
View Cart

Серия M370™ разработана для обеспечения высокой производительности при работе на высоких подачах.

Серия M370™ разработана для обеспечения высокой производительности на больших подачах, двусторонние пластины с шестью режущими кромками обеспечивают высокую как надежность обработки, так и удельный съем металла при низких затратах на режущую кромку.

  • Очень большой удельный съем металла
  • Рекомендуется для черновой обработки с большими подачами
  • Внутренний подвод СОЖ
  • Шесть режущих кромок на каждой пластине
  • Различные типы корпусов фрез
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (85)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (80)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (85)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (85)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (85)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (85)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (85)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (85)
  • M Stainless Steel (85)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (85)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (85)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (85)
  • K Cast Iron (73)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (73)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (73)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (73)
  • N Non-Ferrous Materials (65)
    • N1
      Wrought Aluminum
      (65)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (65)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (65)
  • S High-Temp Alloys (83)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (81)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (81)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (81)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (83)
  • H Hardened Materials (67)
    • H1
      Hardened Materials 44-48 HRC
      (67)
Select All Star
  • CN (9)
  • DE (27)
  • GB (10)
  • IN (6)
  • US (23)
Applications
Applications
  • Chamfer Milling Chamfer Milling (2)
  • Face Milling Face Milling (60)
  • Pocket Pocket (60)
  • Pocket Helical Pocket Helical (58)
  • Pocket Milling Pocket Milling (60)
  • Pocket Plunge Milling Pocket Plunge Milling (59)
  • Profile Milling Profile Milling (60)
  • Ramping Ramping (60)
  • Shoulder Milling Shoulder Milling (58)
  • Shoulder Roughing Shoulder Roughing (58)
  • Slot Milling Slot Milling (58)
  • Slot Square End Slot Square End (1)
Cutting Diameter
Cutting Diameter
  • 11.2 mm (3)
  • 11.3 mm (3)
  • 11.6 mm (3)
  • 11.7 mm (1)
  • 14.1 mm (1)
  • 17.8 mm (2)
  • 18.06 mm (1)
  • 18.1 mm (2)
  • 18.2 mm (1)
  • 21.27 mm (2)
  • 24.1 mm (1)
  • 24.2 mm (2)
  • 26.0 mm (1)
  • 26.1 mm (1)
  • 28.0 mm (1)
  • 33.11 mm (1)
  • 33.91 mm (2)
  • 35.11 mm (1)
  • 36.0 mm (2)
  • 36.8 mm (2)
  • 38.07 mm (2)
  • 46.09 mm (2)
  • 46.59 mm (2)
  • 49.051 mm (1)
  • 49.08 mm (1)
  • 49.5 mm (1)
  • 51.9 mm (1)
  • 57.7 mm (1)
  • 59.14 mm (1)
  • 59.27 mm (3)
  • 62.2 mm (1)
  • 63.07 mm (2)
  • 66.0 mm (1)
  • 83.06 mm (2)
  • 84.65 mm (2)
  • 108.05 mm (2)
  • 110.05 mm (1)
  • 135.44 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 0.44 in (4)
  • 0.4409 in (2)
  • 0.46 in (4)
  • 0.56 in (1)
  • 0.7 in (2)
  • 0.71 in (2)
  • 0.711 in (1)
  • 0.72 in (1)
  • 0.837 in (2)
  • 0.95 in (3)
  • 1.02 in (1)
  • 1.03 in (1)
  • 1.1 in (1)
  • 1.304 in (1)
  • 1.335 in (2)
  • 1.382 in (1)
  • 1.42 in (2)
  • 1.45 in (2)
  • 1.499 in (2)
  • 1.814 in (2)
  • 1.834 in (2)
  • 1.931 in (1)
  • 1.932 in (1)
  • 1.95 in (1)
  • 2.04 in (1)
  • 2.27 in (1)
  • 2.328 in (1)
  • 2.333 in (3)
  • 2.45 in (1)
  • 2.483 in (2)
  • 2.6 in (1)
  • 3.27 in (2)
  • 3.333 in (2)
  • 4.254 in (2)
  • 4.333 in (1)
  • 5.332 in (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.984 in (6)
  • 1.0 in (4)
  • 1.102 in (1)
  • 1.25 in (2)
  • 1.26 in (4)
  • 1.5 in (5)
  • 1.575 in (2)
  • 1.653 in (1)
  • 1.968 in (1)
  • 1.969 in (2)
  • 2.0 in (4)
  • 2.047 in (3)
  • 2.48 in (3)
  • 2.5 in (3)
  • 2.598 in (2)
  • 3.0 in (6)
  • 3.149 in (1)
  • 3.15 in (2)
  • 3.937 in (2)
  • 4.0 in (2)
  • 4.921 in (2)
  • 5.0 in (1)
  • 6.0 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.0 mm (6)
  • 25.4 mm (4)
  • 28.0 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (4)
  • 38.1 mm (5)
  • 40.0 mm (2)
  • 42.0 mm (1)
  • 50.0 mm (3)
  • 50.8 mm (4)
  • 52.0 mm (3)
  • 63.0 mm (3)
  • 63.5 mm (3)
  • 66.0 mm (2)
  • 76.2 mm (6)
  • 80.0 mm (3)
  • 100.0 mm (2)
  • 101.6 mm (2)
  • 125.0 mm (2)
  • 127.0 mm (1)
  • 152.4 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.049 in (35)
  • 0.078 in (25)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 1.25 mm (35)
  • 2.0 mm (25)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 35.0 mm (3)
  • 38.1 mm (7)
  • 40.0 mm (15)
  • 42.93 mm (1)
  • 43.0 mm (2)
  • 44.45 mm (3)
  • 50.0 mm (18)
  • 50.04 mm (1)
  • 50.79 mm (1)
  • 50.8 mm (4)
  • 60.33 mm (2)
  • 63.0 mm (2)
  • 63.5 mm (1)
Reach Min to Reach Max
Reach
Reach
  • 1.378 in (3)
  • 1.499 in (1)
  • 1.5 in (6)
  • 1.574 in (2)
  • 1.575 in (13)
  • 1.69 in (1)
  • 1.693 in (2)
  • 1.75 in (3)
  • 1.968 in (8)
  • 1.969 in (7)
  • 1.97 in (4)
  • 2.0 in (5)
  • 2.375 in (2)
  • 2.48 in (2)
  • 2.5 in (1)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 12.0 (34)
  • 15.0 (24)
  • 75.0 (1)
  • 78.0 (1)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • 2 Key & Cutter Retention Screw (1)
  • 2 Key & Socket Head Cap Screw (1)
  • A-Socket Head Cap Screw (36)
  • Screw-On Connection (5)
  • Straight-Cylindrical (17)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 1.22 mm (47)
  • 1.27 mm (40)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0482 in (47)
  • 0.05 in (40)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TN5515 (35)
  • TN6520 (35)
  • TN6525 (37)
  • TN6540 (37)
  • TN7535 (35)
  • WK15CM (62)
  • WP20CM (25)
  • WP25PM (65)
  • WP35CM (27)
  • WP40PM (65)
  • WS30PM (62)
  • WS40PM (65)
  • WU35PM (27)
Hand Of Tool
Hand Of Tool
  • R (60)
Wiper Insert
Wiper Insert
  • N (27)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.48 (1)
  • 0.5 (3)
  • 0.62 (1)
  • 0.66 (1)
  • 0.8 (1)
  • 0.81 (1)
  • 0.83 (3)
  • 0.84 (2)
  • 1.0 (3)
  • 1.01 (1)
  • 1.09 (2)
  • 1.3 (4)
  • 1.41 (6)
  • 1.46 (2)
  • 1.5 (3)
  • 1.73 (1)
  • 1.8 (2)
  • 1.9 (4)
  • 2.05 (3)
  • 2.09 (5)
  • 2.4 (1)
  • 2.5 (3)
  • 2.6 (1)
  • 3.5 (1)
  • 3.6 (2)
  • 3.7 (1)
  • 6.4 (2)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • X-TRIGON WO_J 101.5 (77)
  • X-TRIGON WO_J 80 (45)
Neck Diameter
Neck Diameter
  • 21.0 mm (1)
  • 21.391 mm (3)
  • 22.0 mm (3)
  • 23.0 mm (1)
  • 27.74 mm (1)
  • 27.741 mm (1)
  • 29.0 mm (3)
  • 30.373 mm (1)
  • 33.621 mm (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 0.827 in (1)
  • 0.842 in (3)
  • 0.866 in (3)
  • 0.906 in (1)
  • 1.092 in (2)
  • 1.142 in (3)
  • 1.196 in (1)
  • 1.324 in (1)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-TRIGON WO_J 101.5 (17)
  • X-TRIGON WO_J 80 (10)
Insert IC Size
Insert IC Size
  • 0.3068 in (6)
  • 0.3069 in (6)
  • 0.472 in (15)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 7.794 mm (12)
  • 12.0 mm (15)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 0.246 in (12)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 6.3 mm (12)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MH (12)
  • MM (12)
  • MR (3)
Cutting Tool Material
Cutting Tool Material
  • H W (27)
Tolerance Class
Tolerance Class
  • E (27)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (17)
  • SCREW-ON (5)
  • SHELL MILL (38)
Back-End Diameter
Back-End Diameter
  • 0.5 in (1)
  • 0.6299 in (1)
  • 0.63 in (1)
  • 0.75 in (6)
  • 0.8268 in (3)
  • 0.866 in (1)
  • 0.8661 in (3)
  • 0.867 in (2)
  • 0.87 in (3)
  • 0.9843 in (5)
  • 1.0 in (8)
  • 1.06 in (2)
  • 1.063 in (1)
  • 1.064 in (2)
  • 1.1417 in (2)
  • 1.25 in (6)
  • 1.2598 in (3)
  • 1.26 in (2)
  • 1.5 in (5)
  • 1.58 in (2)
  • 2.0 in (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 12.7 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (3)
  • 19.1 mm (3)
  • 21.0 mm (3)
  • 22.0 mm (9)
  • 25.0 mm (5)
  • 25.4 mm (8)
  • 27.0 mm (5)
  • 29.0 mm (2)
  • 31.7 mm (2)
  • 31.75 mm (2)
  • 31.8 mm (2)
  • 32.0 mm (5)
  • 38.1 mm (5)
  • 40.0 mm (2)
  • 50.8 mm (1)
Back-End Diameter Min to Back-End Diameter Max
other
Grade
Grade
  • TN6525 (2)
  • TN6540 (2)
  • WK15CM (2)
  • WP25PM (5)
  • WP35CM (2)
  • WP40PM (5)
  • WS30PM (2)
  • WS40PM (5)
  • WU35PM (2)
Tool Unit
Tool Unit
  • I (54)
  • M (58)
Insert Hand
Insert Hand
  • R (27)
Number of Inserts
Number of Inserts
  • 2.0 (7)
  • 3.0 (10)
  • 4.0 (11)
  • 5.0 (11)
  • 6.0 (11)
  • 7.0 (6)
  • 8.0 (2)
  • 9.0 (2)
Number of Inserts Min to Number of Inserts Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (9)
  • 44.45 mm (3)
  • 50.0 mm (16)
  • 50.04 mm (1)
  • 50.79 mm (1)
  • 50.8 mm (4)
  • 57.0 mm (2)
  • 57.01 mm (1)
  • 60.33 mm (2)
  • 63.0 mm (2)
  • 67.5 mm (2)
  • 150.0 mm (2)
  • 152.4 mm (4)
  • 152.41 mm (1)
  • 195.21 mm (1)
  • 200.0 mm (4)
  • 203.2 mm (2)
  • 254.0 mm (1)
  • 300.0 mm (2)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.575 in (9)
  • 1.75 in (3)
  • 1.968 in (6)
  • 1.969 in (7)
  • 1.97 in (4)
  • 2.0 in (5)
  • 2.244 in (2)
  • 2.245 in (1)
  • 2.375 in (2)
  • 2.48 in (2)
  • 2.657 in (2)
  • 5.906 in (2)
  • 6.0 in (5)
  • 7.686 in (1)
  • 7.874 in (4)
  • 8.0 in (2)
  • 10.0 in (1)
  • 11.811 in (2)
Over All Length [L] Min to Over All Length [L] Max
Head Length [L2]
Head Length [L2]
  • 35.0 mm (3)
  • 42.93 mm (1)
  • 43.0 mm (2)
  • 63.5 mm (1)
Head Length [L2] Min to Head Length [L2] Max
Head Length [L2]
Head Length [L2]
  • 1.378 in (3)
  • 1.69 in (1)
  • 1.693 in (2)
  • 2.5 in (1)
Head Length [L2] Min to Head Length [L2] Max
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Серия M370™ • Фрезы для профильной обработки

Пластины WOEJ08 • Концевые фрезы с резьбовым креплением
(4 Products)
  • Shank - Screw-OnShank - Screw-On
  • 3D Profiling3D Profiling
  • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
  • Slotting: Square EndSlotting: Square End
  • Face MillingFace Milling
  • Ramping: BlankRamping: Blank
  • PocketingPocketing
  • Helical MillingHelical Milling
  • Plunge MillingPlunge Milling
  • Milling - Through CoolantMilling - Through Coolant
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
4056188 M370D042Z05M16WO08 M370D042Z05M16WO08   42.0000 1.653 28.0000 1.100 29.0 1.141 17.0000 .6690 M16 43.0000 1.693 24.0000 .9450 1.2500 .0490 5 1.010 32500 Y 0.57
    List price:
    $350.32 /each.
    Your price::
    Qty
    4170918 M370D025Z03M12WO08 M370D025Z03M12WO08   25.0000 .9840 11.3000 .4400 21.0 .8268 12.5000 .4920 M12 35.0000 1.378 17.0000 .6670 1.2500 .0490 3 2.090 46000 Y 0.09
      List price:
      $304.84 /each.
      Your price::
      Qty
      4056187 M370D032Z04M16WO08 M370D032Z04M16WO08   32.0000 1.260 18.1000 .7100 29.0 1.141 17.0000 .6690 M16 43.0000 1.693 24.0000 .9450 1.2500 .0490 4 1.410 38700 Y 0.21
        List price:
        $324.17 /each.
        Your price::
        Qty
        4056186 M370D025Z02M12WO08 M370D025Z02M12WO08   25.0000 .9840 11.2000 .4409 21.0 .8268 12.5000 .4920 M12 35.0000 1.378 17.0000 .6690 1.2500 .0490 2 2.090 46000 Y 0.09
          List price:
          $299.14 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          Серия M370™ • Фрезы для профильной обработки

          Пластины WOEJ08 • Концевые фрезы с цилиндрическим хвостовиком
          (8 Products)
          • Shank - Cylindrical  PlainShank - Cylindrical Plain
          • 3D Profiling3D Profiling
          • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
          • Slotting: Square EndSlotting: Square End
          • Face MillingFace Milling
          • Ramping: BlankRamping: Blank
          • PocketingPocketing
          • Plunge MillingPlunge Milling
          • Milling - Through CoolantMilling - Through Coolant
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
          4056191 M370D032Z04A32WO08L150 M370D032Z04A32WO08L150   32.0000 1.260 18.1000 .7100 32.0 1.259 150.0000 5.906 150.0000 5.906 40.0000 1.574 1.2500 .0490 4 38700 Y 0.84
            List price:
            $324.17 /each.
            Your price::
            Qty
            4056192 M370D032Z04A32WO08L200 M370D032Z04A32WO08L200   32.0000 1.260 18.0600 .7110 32.0 1.259 200.0000 7.874 200.0000 7.874 50.0000 1.968 1.2500 .0490 4 38700 Y 1.14
              List price:
              $346.91 /each.
              Your price::
              Qty
              4056189 M370D025Z03A25WO08L150 M370D025Z03A25WO08L150   25.0000 .9840 11.2000 .4400 25.0 .9843 150.0000 5.906 150.0000 5.906 40.0000 1.574 1.2500 .0490 3 46000 Y 0.50
                List price:
                $304.84 /each.
                Your price::
                Qty
                4170919 M370D025Z03A25WO08L200 M370D025Z03A25WO08L200   25.0000 .9840 11.3000 .4400 25.0 .9843 200.0000 7.874 200.0000 7.874 40.0000 1.575 1.2500 .0490 3 46000 Y 0.69
                  List price:
                  $327.58 /each.
                  Your price::
                  Qty
                  4170921 M370D032Z03A32WO08L300 M370D032Z03A32WO08L300   32.0000 1.260 18.2000 .7200 32.0 1.259 300.0000 11.811 300.0000 11.811 40.0000 1.575 1.2500 .0490 3 38700 Y 1.77
                    List price:
                    $402.65 /each.
                    Your price::
                    Qty
                    4008281 M370D025Z02A25WO08L200 M370D025Z02A25WO08L200   25.0000 .9840 11.2000 .4409 25.0 .9843 200.0000 7.874 200.0000 7.874 50.0000 1.968 1.2500 .0490 2 46000 Y 0.68
                      List price:
                      $321.89 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty

                      Sold in pkg. of

                      ORIGINAL PRODUCT

                      Фрезы для профильной обработки • Серия M370™

                      Пластины WOEJ08 • Насадные фрезы
                      (9 Products)
                      • Milling - Side and FaceMilling - Side and Face
                      • 3D Profiling3D Profiling
                      • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                      • Slotting: Square EndSlotting: Square End
                      • Face MillingFace Milling
                      • Ramping: BlankRamping: Blank
                      • PocketingPocketing
                      • Helical MillingHelical Milling
                      • Plunge MillingPlunge Milling
                      • Milling - Through CoolantMilling - Through Coolant
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                      4008276 M370D050Z05WO08 M370D050Z05WO08   50.0000 1.968 36.0000 1.420 22.0 .867 44.0000 1.732 40.0000 1.575 40.0000 1.575 1.2500 .0490 5 29200 Y 0.29
                        List price:
                        $443.61 /each.
                        Your price::
                        Qty
                        4008277 M370D066Z06WO08 M370D066Z06WO08   66.0000 2.598 51.9000 2.040 27.0 1.063 60.0000 2.362 50.0000 1.969 50.0000 1.969 1.2500 .0490 6 24900 Y 0.77