Suggestions

Product Suggestions

Product Categories

Resources

successfully added to cart
View Cart

Универсальная торцевая фреза для любых условий обработки

Эта универсальная торцевая фреза для получистовой и получистовой обработки стали, нержавеющей стали, чугуна и чугуна с шаровидным графитом подходит для любых условий обработки - как для стабильных, так и для нестабильных условиях, маломощных станков, увеличенных вылетов и др.

Характеристики и преимущества

  • Одна универсальная геометрия режущей пластины -MM и 3 марки сплавов: WP35CM, WU20PM, WK15CM
  • Угол в плане 44°
  • Глубина резания Ap1 max: 4 мм
  • Режущие пластины повышенной точности - шлифованы по периферии.
  • Продвинутая конструкция режущих пластин позволяет отлично сопротивляться ударным нагрузкам и увеличивает стойкость режущих кромок.

Thrive in a Variety of Machine Setups

When you need the lowest cost-per-edge in medium-roughing applications, look no further than M1600. This face mill creates a smooth cut allowing for lower power consumption on the machine which results in a longer life on the spindle giving you more value for your money.

Watch as we put M1600 side milling roughing to the test in cast iron, steel, and stainless steel.

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (22)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (22)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (22)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (22)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (22)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (22)
  • M Stainless Steel (22)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (22)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (22)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (22)
  • K Cast Iron (27)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (27)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (27)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (27)
  • N Non-Ferrous Materials (22)
    • N1
      Wrought Aluminum
      (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (22)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
  • S High-Temp Alloys (22)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (21)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (21)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (21)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (22)
  • H Hardened Materials (23)
    • H1
      Hardened Materials 44-48 HRC
      (23)
Select All Star
  • DE (4)
  • IN (10)
Applications
Applications
  • Chamfer Milling Chamfer Milling (12)
  • Face Milling Face Milling (19)
Cutting Diameter
Cutting Diameter
  • 50.0 mm (1)
  • 50.8 mm (1)
  • 63.0 mm (1)
  • 63.5 mm (1)
  • 76.2 mm (2)
  • 80.0 mm (2)
  • 100.0 mm (2)
  • 101.6 mm (2)
  • 125.0 mm (2)
  • 127.0 mm (1)
  • 152.4 mm (2)
  • 160.0 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.9685 in (1)
  • 2.0 in (1)
  • 2.4803 in (1)
  • 2.5 in (1)
  • 3.0 in (2)
  • 3.1496 in (2)
  • 3.937 in (2)
  • 4.0 in (2)
  • 4.9213 in (2)
  • 5.0 in (1)
  • 6.0 in (2)
  • 6.2992 in (2)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 2.3911 in (1)
  • 2.4226 in (1)
  • 2.9028 in (1)
  • 2.9226 in (1)
  • 3.4034 in (2)
  • 3.4225 in (1)
  • 3.5721 in (1)
  • 4.1908 in (1)
  • 4.2543 in (1)
  • 4.3595 in (1)
  • 4.4225 in (1)
  • 5.1751 in (1)
  • 5.3437 in (1)
  • 5.4225 in (1)
  • 6.2538 in (1)
  • 6.4225 in (1)
  • 6.553 in (1)
  • 6.7217 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 60.733 mm (1)
  • 61.534 mm (1)
  • 73.732 mm (1)
  • 74.234 mm (1)
  • 86.4464 mm (1)
  • 86.447 mm (1)
  • 86.9315 mm (1)
  • 90.732 mm (1)
  • 106.447 mm (1)
  • 108.0592 mm (1)
  • 110.731 mm (1)
  • 112.3315 mm (1)
  • 131.447 mm (1)
  • 135.731 mm (1)
  • 137.7315 mm (1)
  • 158.8465 mm (1)
  • 163.1315 mm (1)
  • 166.445 mm (1)
  • 170.731 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 0.0827 in (7)
  • 0.1457 in (12)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 2.1 mm (7)
  • 3.7 mm (12)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 40.0 mm (2)
  • 40.005 mm (2)
  • 44.45 mm (1)
  • 50.0 mm (6)
  • 50.8 mm (1)
  • 60.452 mm (2)
  • 62.992 mm (1)
  • 63.0 mm (4)
Reach Min to Reach Max
Reach
Reach
  • 1.5748 in (2)
  • 1.575 in (2)
  • 1.75 in (1)
  • 1.9685 in (6)
  • 2.0 in (1)
  • 2.38 in (2)
  • 2.48 in (1)
  • 2.4803 in (4)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 42.0 (7)
  • 43.0 (12)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (8)
  • B-Cutter Retention Screw (9)
  • C-Bolt Circle (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (9)
  • 16.0 (25)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 mm (9)
  • 0.8 mm (10)
  • 1.2 mm (15)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 in (9)
  • 0.0313 in (10)
  • 0.0469 in (15)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (9)
  • 0.0236 in (10)
  • 0.0301 in (15)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (9)
  • 0.6 mm (10)
  • 0.765 mm (15)
Corner Chamfer Min to Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM-F (8)
  • WK15CM (21)
  • WP35CM (13)
  • WU10PM (9)
  • WU20PM (21)
Hand Of Tool
Hand Of Tool
  • R (19)
Wiper Insert
Wiper Insert
  • Y (8)
frontEnd
Insert Shape
Insert Shape
  • O-OCTOGON 135 (25)
  • X-RHOMBIC 83 (9)
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • O-OCTOGON 135 (6)
  • X-RHOMBIC 83 (2)
Insert IC Size
Insert IC Size
  • 0.3937 in (3)
  • 0.5 in (2)
  • 0.6646 in (3)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 10.0 mm (3)
  • 12.7 mm (2)
  • 16.88 mm (3)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 0.1616 in (3)
  • 0.2706 in (3)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 4.1 mm (3)
  • 6.874 mm (3)
  • 8.721 mm (1)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MM (6)
Cutting Tool Material
Cutting Tool Material
  • H W (8)
Tolerance Class
Tolerance Class
  • G (6)
  • H (2)
backEnd
Connection Type
Connection Type
  • SHELL MILL (19)
Back-End Diameter
Back-End Diameter
  • 0.75 in (2)
  • 0.8666 in (2)
  • 1.0 in (2)
  • 1.063 in (2)
  • 1.2598 in (1)
  • 1.2603 in (1)
  • 1.5 in (3)
  • 1.5748 in (2)
  • 1.5753 in (2)
  • 2.0 in (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 19.05 mm (2)
  • 22.01 mm (2)
  • 25.4 mm (2)
  • 27.0 mm (2)
  • 32.0 mm (1)
  • 32.012 mm (1)
  • 38.1 mm (3)
  • 40.0 mm (2)
  • 40.012 mm (2)
  • 50.8 mm (2)
Back-End Diameter Min to Back-End Diameter Max
hidden
Category Path
Category Path
other
Grade
Grade
  • THM-F (1)
  • WK15CM (2)
  • WP35CM (1)
  • WU10PM (2)
  • WU20PM (2)
Platform
Platform
  • M1600 (18)
Tool Unit
Tool Unit
  • I (17)
  • M (18)
Insert Hand
Insert Hand
  • N (8)
Number of Inserts
Number of Inserts
  • 4.0 (2)
  • 5.0 (2)
  • 7.0 (2)
  • 8.0 (2)
  • 9.0 (2)
  • 10.0 (2)
  • 11.0 (2)
  • 12.0 (1)
  • 13.0 (2)
  • 16.0 (2)
Number of Inserts Min to Number of Inserts Max
Over All Length [L]
Over All Length [L]
  • 40.0 mm (2)
  • 40.005 mm (2)
  • 44.45 mm (1)
  • 50.0 mm (6)
  • 50.8 mm (1)
  • 60.452 mm (2)
  • 62.992 mm (1)
  • 63.0 mm (4)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 1.5748 in (2)
  • 1.575 in (2)
  • 1.75 in (1)
  • 1.9685 in (6)
  • 2.0 in (1)
  • 2.38 in (2)
  • 2.48 in (1)
  • 2.4803 in (4)
Over All Length [L] Min to Over All Length [L] Max
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

Face Mills • M760 Series

Wiper Inserts • XDHX -W2C
(2 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
6739214 XDHX1004RW2C XDHX1004RW2C   THM-F 2 12.7000 .5000 8.7210   4.7600 .1875 0.0000   0.0200 .0008
    List price:
    $31.03 /each.
    Your price::
    6877620 XDHX1004RW2C XDHX1004RW2C   WU10PM 2 12.7000 .5000     4.7600 .1875     0.0200 .0008
      List price:
      $33.13 /each.
      Your price::
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor

      ORIGINAL PRODUCT

      Торцевые фрезы • Серия M1600

      M1600 • Насадные фрезы • Торцевые фрезы для обработки стали и чугуна при низкой цене за кромку
      (6 Products)
      • Face MillingFace Milling
      • Side Milling/Shoulder Milling: Eased ChamferSide Milling/Shoulder Milling: Eased Chamfer
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D4] Bolt Circle 4 [D4] Bolt Circle 3 [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
      4002798 M1600D160Z13S40ON06 M1600D160Z13S40ON06   160.0000 6.299 170.7310 6.721 40.012 1.575 66.7000 2.626 90.0000 3.543 63.0000 2.480 63.0000 2.480 63.0000 2.480 3.7000 .1457 13   Y 3.83
        List price:
        $1,120.00 /each.
        Your price::
        3860336 M1600D100Z09S32ON06 M1600D100Z09S32ON06   100.0000 3.937 110.7310 4.359 32.012 1.260     78.0000 3.070 50.0000 1.968 50.0000 1.968 50.0000 1.968 3.7000 .1457 9   Y 1.52
          List price:
          $660.00 /each.
          Your price::
          4002797 M1600D063Z05S22ON06 M1600D063Z05S22ON06   63.0000 2.480 73.7320 2.902 22.01 .8666     40.0000 1.574 40.0000 1.574 40.0000 1.574 40.0000 1.574 3.7000 .1457 5   Y 0.43
            List price:
            $490.00 /each.
            Your price::
            3837977 M1600D080Z07S27ON06 M1600D080Z07S27ON06   80.0000 3.149 90.7320 3.572 27.0 1.063     60.0000 2.362 50.0000 1.968 50.0000 1.968 50.0000 1.968 3.7000 .1457 7   Y 0.97
              List price:
              $550.00 /each.
              Your price::
              4002796 M1600D050Z04S22ON06 M1600D050Z04S22ON06   50.0000 1.968 60.7330 2.391 22.01 .8666     40.0000 1.574 40.0000 1.574 40.0000 1.574 40.0000 1.574 3.7000 .1457 4   Y 0.28
                List price:
                $450.00 /each.
                Your price::
                3837978 M1600D125Z11S40ON06 M1600D125Z11S40ON06   125.0000 4.921 135.7310 5.343 40.012 1.575     89.0000 3.503 63.0000 2.480 63.0000 2.480 63.0000 2.480 3.7000 .1457 11 6900 Y 2.70
                  List price:
                  $800.00 /each.
                  Your price::
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor

                  ORIGINAL PRODUCT

                  Face Mills • M1600 Mini-F Series

                  Shell Mills • Cast Iron Finishing
                  (7 Products)
                  • Face MillingFace Milling
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                  5546056 M1600D125Z12W3S40ON04 M1600D125Z12W3S40ON04   125.0000 4.921 131.4470 5.175 40.0 1.574 89.0000 3.503 63.0000 2.480 63.0000 2.480 63.0000 2.480 2.1000 .0827 12   N 8.39
                    List price:
                    $960.00 /each.
                    Your price::
                    5626416 M1600D080Z08W2S27ON04 M1600D080Z08W2S27ON04   80.0000 3.149 86.4470 3.403 27.0 1.063 80.0000 3.149 50.0000 1.968 50.0000 1.968 50.0000 1.968 2.1000 .0827 8   N 1.56
                      List price:
                      $660.00 /each.
                      Your price::
                      5626418 M1600D160Z16W4S40ON04 M1600D160Z16W4S40ON04   160.0000 6.299 166.4450 6.553 40.0 1.574 90.0000 3.543 63.0000 2.480 63.0000 2.480 63.0000 2.480 2.1000 .0827 16 5700 N 6.40
                        List price:
                        $1,344.00 /each.
                        Your price::
                        6921235 M1600U300Z08W2S100ON04 M1600U300Z08W2S100ON04   76.2000 3.000 86.4464 3.403 25.4 1.0 80.0000 3.149 50.0000 1.968 50.0000 1.968 50.0000 1.968 2.1000 .0827 8   N 1.50
                          List price:
                          $161.71 /each.
                          Your price::
                          6921237 M1600U600Z16W4S200ON04 M1600U600Z16W4S200ON04   152.4000 6.000 158.8465 6.253 50.8 2.0 123.8250 4.875 62.9920 2.480 62.9920 2.480 62.9920 2.480 2.1000 .0827 16   N 5.91
                            List price:
                            $241.99 /each.
                            Your price::
                            6921236 M1600U400Z10W2S150ON04 M1600U400Z10W2S150ON04   101.6000 4.000 108.0592 4.254 38.1 1.5 96.7740 3.810 50.0000 1.968 50.0000 1.968 50.0000 1.968 2.1000 .0827 10   N 2.15
                              List price:
                              $197.40 /each.
                              Your price::
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor

                              ORIGINAL PRODUCT

                              Торцевые фрезы • Серия M1600

                              Пластины • ONGX -MM • Низкая стоимость обработки кромки
                              (3 Products)
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                              6852431 ONGX060512ANSNMM ONGX060512ANSNMM   WP35CM 16 16.8800 .6646 6.8740 .2706 5.4730 .2155 0.7650 .0301 1.2000 .0468 0.0550 .0022
                                List price:
                                $31.03 /each.
                                Your price::
                                6072424 ONGX060512ANSNMM ONGX060512ANSNMM   WK15CM 16 16.8800 .6646 6.8740 .2706 5.4730 .2155 0.7650 .0301 1.2000 .0468 0.0400 .0016
                                  List price:
                                  $23.00 /each.
                                  Your price::
                                  3778942 ONGX060512ANSNMM ONGX060512ANSNMM   WU20PM 16 16.8800 .6646 6.8740 .2706 5.4730 .2155 0.7650 .0301 1.2000 .0468 0.0550 .0022
                                    List price:
                                    $29.63 /each.
                                    Your price::
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor

                                    ORIGINAL PRODUCT

                                    Face Mills • M1600 Series

                                    M1600 • Shell Mills • Steel and Cast Iron Face Mills at Low Cost per Edge
                                    (6 Products)
                                    • 100018357100018357
                                    • Side Milling/Shoulder Milling: Eased ChamferSide Milling/Shoulder Milling: Eased Chamfer
                                    View Products
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [L1] Gage Length [L1] Gage Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Coolant Supply Weight Pounds
                                    6921229 M1600U200Z04S075ON06 M1600U200Z04S075ON06 50.8000 2.000 61.5340 2.422 19.05 .75 44.4500 1.750 40.0050 1.575 40.0050 1.575 40.0050 1.575 3.7000 .1457 4 Y 0.69
                                      List price:
                                      $50.80 /each.
                                      Your price::
                                      6921231 M1600U300Z07S100ON06 M1600U300Z07S100ON06 76.2000 3.000 86.9315 3.422 25.4 1.0 69.8500 2.750 44.4500 1.750 44.4500 1.750 44.4500 1.750 3.7000 .1457 7 Y 2.05
                                        List price:
                                        $91.40 /each.
                                        Your price::
                                        6921233 M1600U500Z11S150ON06 M1600U500Z11S150ON06 127.0000 5.000 137.7315 5.422 38.1 1.5 96.7740 3.810 60.4520 2.380 60.4520 2.380 60.4520 2.380 3.7000 .1457 11 Y 5.99
                                          List price:
                                          $136.00 /each.
                                          Your price::
                                          6921232 M1600U400Z09S150ON06 M1600U400Z09S150ON06 101.6000 4.000 112.3315 4.422 38.1 1.5 85.8520 3.380 50.8000 2.000 50.8000 2.000 50.8000 2.000 3.7000 .1457 9 Y 3.28
                                            List price:
                                            $113.33 /each.
                                            Your price::
                                            6921230 M1600U250Z05S075ON06 M1600U250Z05S075ON06 63.5000 2.500 74.2340 2.922 19.05 .75 44.4500 1.750 40.0050 1.575 40.0050 1.575 40.0050 1.575 3.7000 .1457 5 Y 1.03
                                              List price:
                                              $58.35 /each.
                                              Your price::
                                              6921234 M1600U600Z13S200ON06 M1600U600Z13S200ON06 152.4000 6.000 163.1315 6.422 50.8 2.0 123.8250 4.875 60.4520 2.380 60.4520 2.380 60.4520 2.380 3.7000 .1457 13 Y 9.31
                                                List price:
                                                $169.74 /each.
                                                Your price::
                                                List price:
                                                Discount: %
                                                Your price::
                                                Replacement This item is not available
                                                Replacement Product This item may be available through a distributor

                                                ORIGINAL PRODUCT

                                                Face Mills • M1600 Mini-F Series

                                                Inserts • ONGX -MM
                                                (3 Products)
                                                View Products
                                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                6095310 ONGX04T308ANSNMM ONGX04T308ANSNMM WK15CM 16 10.0000 .3937 4.1000 .1616 3.9730 .1564 0.6000 .0236 0.8000 .0312 0.0400 .0016
                                                  List price:
                                                  $16.10 /each.
                                                  Your price::
                                                  6291724 ONGX04T308ANSNMM ONGX04T308ANSNMM WU20PM 16 10.0000 .3937 4.1000 .1616 3.9730 .1564 0.6000 .0236 0.8000 .0312 0.0500 .0020
                                                    List price:
                                                    $16.10 /each.
                                                    Your price::
                                                    6243772 ONGX04T308ANSNMM ONGX04T308ANSNMM WU10PM 16 10.0000 .3937 4.1000 .1616 3.9730 .1564 0.6000 .0236 0.8000 .0312 0.0350 .0014
                                                      List price:
                                                      $16.10 /each.
                                                      Your price::
                                                      List price:
                                                      Discount: %
                                                      Your price::
                                                      Replacement This item is not available
                                                      Replacement Product This item may be available through a distributor
                                                      Торцевые фрезы

                                                      Suggestions

                                                      Product Suggestions

                                                      Product Categories

                                                      Resources

                                                      successfully added to cart
                                                      View Cart