Сверла Top Drill Flat с плоским торцом
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая системаДюймовая система
Workpiece Material
Workpiece Material
- P Steel (1)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1)
- M Stainless Steel (1)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1)
- K Cast Iron (1)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1)
- S High-Temp Alloys (1)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1)
Applications
Applications
Convex Drilling (2)
Corner Style SquareEnd Drilling (2)
CornerStyle Chamfer Drilling (2)
Counterboring (2)
Countersinking (2)
Cross Hole Drilling (2)
Drilling (2)
Flat Bottom Drilling (2)
Inclined Entry Drilling (2)
Inclined Exit Drilling (2)
Cutting Diameter
Cutting Diameter
- 0.157 in(1)
- 0.237 in(1)
- 0.473 in(1)
- 0.551 in(1)
- 0.63 in(2)
- 0.709 in(1)
- 0.787 in(1)
до
Cutting Diameter
Cutting Diameter
- 4.0 mm(1)
- 6.0 mm(1)
- 12.0 mm(1)
- 14.0 mm(1)
- 16.0 mm(2)
- 18.0 mm(1)
- 20.0 mm(1)
до
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 17.0 mm(1)
- 20.0 mm(1)
- 40.0 mm(1)
- 43.0 mm(1)
- 45.0 mm(2)
- 51.0 mm(1)
- 55.0 mm(1)
до
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.669 in(1)
- 0.787 in(1)
- 1.575 in(1)
- 1.693 in(1)
- 1.772 in(2)
- 2.008 in(1)
- 2.165 in(1)
до
Reach
Reach
- 0.946 in(1)
- 1.102 in(1)
- 2.165 in(1)
- 2.362 in(1)
- 2.559 in(2)
- 2.874 in(1)
- 3.11 in(1)
до
Reach
Reach
- 24.0 mm(1)
- 28.0 mm(1)
- 55.0 mm(1)
- 60.0 mm(1)
- 65.0 mm(2)
- 73.0 mm(1)
- 79.0 mm(1)
до
Over All Length [L]
Over All Length [L]
- 2.598 in(2)
- 4.016 in(1)
- 4.213 in(1)
- 4.529 in(2)
- 4.843 in(1)
- 5.157 in(1)
до
Over All Length [L]
Over All Length [L]
- 66.0 mm(2)
- 102.0 mm(1)
- 107.0 mm(1)
- 115.0 mm(2)
- 123.0 mm(1)
- 131.0 mm(1)
до
application
Coating
Coating
- TiAlN (5)
- Uncoated (3)
Grade Of Cutting Tool
Grade Of Cutting Tool
- WN15HD (3)
- WU20PD (5)
backEnd
Back-End Diameter
Back-End Diameter
- 6.0 mm(2)
- 12.0 mm(1)
- 14.0 mm(1)
- 16.0 mm(2)
- 18.0 mm(1)
- 20.0 mm(1)
до
Back-End Diameter
Back-End Diameter
- 0.237 in(2)
- 0.473 in(1)
- 0.551 in(1)
- 0.63 in(2)
- 0.709 in(1)
- 0.787 in(1)
до
No filters matching ""
