Фильтры
Фильтры
Просмотреть фильтры в
Метрическая системаДюймовая система
Workpiece Material
Workpiece Material
- P Steel (12)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(12)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(12)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(12)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(12)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(12)
- M Stainless Steel (12)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(12)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(12)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(12)
- K Cast Iron (12)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(12)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(12)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(12)
- N Non-Ferrous Materials (12)
- N1Wrought Aluminum (12)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(12)
- N3High-Silicon Aluminum Alloys Si >12.2%(12)
- S High-Temp Alloys (12)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(12)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(12)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(12)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(12)
- H Hardened Materials (12)
- H1Hardened Materials 44-48 HRC(12)
Applications
Applications
- Face Milling (12)
- Pocket (2)
- Pocket Helical (2)
- Pocket Milling (2)
- Profile Milling (2)
- Ramping (2)
- Shoulder Bottom Shoulder (2)
- Shoulder Milling (12)
- Shoulder Roughing (12)
- Shoulder Square End (2)
- Slot Milling (6)
- Slot Side (2)
- Slot Square End (6)
Cutting Diameter
Cutting Diameter
- 1.969 in(2)
- 2.0 in(4)
- 2.48 in(2)
- 2.5 in(2)
- 3.0 in(1)
- 3.15 in(1)
до
Cutting Diameter
Cutting Diameter
- 50.0 mm(2)
- 50.801 mm(4)
- 63.0 mm(2)
- 63.5 mm(2)
- 76.2 mm(1)
- 80.0 mm(1)
до
Cutting Length
Cutting Length
- 60.401 mm(5)
- 74.2 mm(1)
- 75.0 mm(5)
- 104.601 mm(1)
до
Cutting Length
Cutting Length
- 2.378 in(5)
- 2.922 in(1)
- 2.953 in(5)
- 4.118 in(1)
до
Reach
Reach
- 3.346 in(2)
- 3.5 in(3)
- 3.938 in(3)
- 4.0 in(3)
- 5.5 in(1)
до
Reach
Reach
- 85.0 mm(2)
- 88.9 mm(3)
- 100.0 mm(3)
- 101.601 mm(3)
- 139.701 mm(1)
до
Number of Flutes
Number of Flutes
- 4 (6)
- 5 (6)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (12)
- 2.0 (12)
до
Over All Length [L]
Over All Length [L]
- 3.346 in(2)
- 3.5 in(3)
- 3.938 in(3)
- 4.0 in(3)
- 5.5 in(1)
до
Over All Length [L]
Over All Length [L]
- 85.0 mm(2)
- 88.9 mm(3)
- 100.0 mm(3)
- 101.601 mm(3)
- 139.701 mm(1)
до
Corner Radius
Corner Radius
- 0.016 in(12)
- 0.031 in(12)
- 0.047 in(12)
- 0.063 in(12)
- 0.079 in(12)
- 0.095 in(12)
- 0.126 in(12)
- 0.157 in(12)
- 0.237 in(12)
до
Corner Radius
Corner Radius
- 0.4 mm(12)
- 0.8 mm(12)
- 1.201 mm(12)
- 1.6 mm(12)
- 2.0 mm(12)
- 2.401 mm(12)
- 3.2 mm(12)
- 4.0 mm(12)
- 6.0 mm(12)
до
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- WK15CM (12)
- WK15PM (12)
- WN10HM (12)
- WN25PM (12)
- WP25PM (12)
- WP35CM (12)
- WP40PM (12)
- WS40PM (12)
- WU20PM (12)
- WU35PM (12)
Maximum Ramp Angle
Maximum Ramp Angle
- 1.6 (1)
- 1.7 (1)
- 2.1 (4)
- 2.8 (4)
- 3.0 (2)
до
backEnd
Back-End Diameter
Back-End Diameter
- 19.05 mm(2)
- 22.0 mm(2)
- 25.401 mm(4)
- 27.0 mm(2)
- 31.75 mm(1)
- 32.0 mm(1)
до
Back-End Diameter
Back-End Diameter
- 0.75 in(2)
- 0.866 in(2)
- 1.0 in(4)
- 1.063 in(2)
- 1.25 in(1)
- 1.26 in(1)
до
No filters matching ""