Suggestions

Product Suggestions

Product Categories

Resources

Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read

H/P Solid Carbide End Mills - Finishing

Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (71)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (58)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (58)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (58)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (71)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (71)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (71)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (27)
  • M Stainless Steel (100)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (100)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (100)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (100)
  • K Cast Iron (71)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (71)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (71)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (71)
  • S High-Temp Alloys (100)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (100)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (73)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (92)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (65)
  • H Hardened Materials (71)
    • H1
      Hardened Materials 44-48 HRC
      (71)
    • H2
      Hardened Materials 48-55 HRC
      (13)
    • H3
      Hardened Materials 56-60 HRC
      (13)
Select All Star
  • CN (18)
  • DE (50)
  • GB (16)
  • IN (3)
  • SG (18)
  • US (45)
Applications
Applications
  • Drilling Drilling (6)
  • Face Milling Face Milling (55)
  • Flat Bottom Drilling Flat Bottom Drilling (6)
  • Pocket Pocket (111)
  • Pocket Helical Pocket Helical (117)
  • Pocket Milling Pocket Milling (111)
  • Ramping Ramping (124)
  • Shoulder Milling Shoulder Milling (159)
  • Shoulder Roughing Shoulder Roughing (75)
  • Shoulder Square End Shoulder Square End (159)
  • Slot Ball Nose Slot Ball Nose (29)
  • Slot Milling Slot Milling (144)
  • Slot Square End Slot Square End (159)
Cutting Diameter
Cutting Diameter
  • 0.1181 in (2)
  • 0.157 in (2)
  • 0.1575 in (2)
  • 0.1875 in (2)
  • 0.1969 in (2)
  • 0.197 in (2)
  • 0.236 in (4)
  • 0.2362 in (7)
  • 0.25 in (7)
  • 0.276 in (2)
  • 0.3125 in (3)
  • 0.315 in (12)
  • 0.375 in (11)
  • 0.3937 in (6)
  • 0.394 in (5)
  • 0.433 in (1)
  • 0.472 in (5)
  • 0.4724 in (7)
  • 0.5 in (12)
  • 0.551 in (2)
  • 0.5512 in (2)
  • 0.625 in (8)
  • 0.6299 in (8)
  • 0.63 in (5)
  • 0.7087 in (1)
  • 0.75 in (16)
  • 0.787 in (3)
  • 0.7874 in (4)
  • 0.984 in (1)
  • 0.9843 in (3)
  • 1.0 in (12)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 3.0 mm (2)
  • 4.0 mm (4)
  • 4.763 mm (2)
  • 5.0 mm (4)
  • 6.0 mm (11)
  • 6.35 mm (7)
  • 7.0 mm (2)
  • 7.938 mm (3)
  • 8.0 mm (12)
  • 9.525 mm (11)
  • 10.0 mm (11)
  • 11.0 mm (1)
  • 12.0 mm (12)
  • 12.7 mm (12)
  • 14.0 mm (4)
  • 15.875 mm (8)
  • 16.0 mm (13)
  • 18.0 mm (1)
  • 19.05 mm (16)
  • 20.0 mm (7)
  • 25.0 mm (4)
  • 25.4 mm (12)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.0 mm (2)
  • 7.0 mm (2)
  • 7.938 mm (1)
  • 8.0 mm (5)
  • 9.525 mm (3)
  • 10.0 mm (4)
  • 11.0 mm (2)
  • 12.0 mm (2)
  • 12.7 mm (5)
  • 13.0 mm (11)
  • 15.875 mm (7)
  • 16.0 mm (13)
  • 19.0 mm (1)
  • 19.05 mm (6)
  • 20.0 mm (1)
  • 20.638 mm (2)
  • 22.0 mm (10)
  • 22.225 mm (6)
  • 25.0 mm (1)
  • 25.4 mm (6)
  • 26.0 mm (13)
  • 31.75 mm (8)
  • 32.0 mm (12)
  • 38.0 mm (6)
  • 38.1 mm (16)
  • 41.275 mm (1)
  • 45.0 mm (3)
  • 47.625 mm (1)
  • 50.8 mm (2)
  • 57.15 mm (7)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.236 in (1)
  • 0.2362 in (1)
  • 0.2756 in (2)
  • 0.3125 in (1)
  • 0.315 in (5)
  • 0.375 in (3)
  • 0.3937 in (3)
  • 0.394 in (1)
  • 0.433 in (2)
  • 0.472 in (1)
  • 0.4724 in (1)
  • 0.5 in (5)
  • 0.5118 in (6)
  • 0.512 in (5)
  • 0.625 in (7)
  • 0.6299 in (7)
  • 0.63 in (6)
  • 0.748 in (1)
  • 0.75 in (6)
  • 0.7874 in (1)
  • 0.8125 in (2)
  • 0.866 in (4)
  • 0.8661 in (6)
  • 0.875 in (6)
  • 0.9843 in (1)
  • 1.0 in (6)
  • 1.0236 in (6)
  • 1.024 in (7)
  • 1.25 in (8)
  • 1.2598 in (8)
  • 1.26 in (4)
  • 1.496 in (3)
  • 1.4961 in (3)
  • 1.5 in (16)
  • 1.625 in (1)
  • 1.7717 in (2)
  • 1.772 in (1)
  • 1.875 in (1)
  • 2.0 in (2)
  • 2.25 in (7)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.236 in (1)
  • 0.2756 in (2)
  • 0.3125 in (1)
  • 0.315 in (4)
  • 0.375 in (2)
  • 0.3937 in (2)
  • 0.394 in (1)
  • 0.433 in (2)
  • 0.472 in (1)
  • 0.5 in (4)
  • 0.5118 in (3)
  • 0.512 in (5)
  • 0.625 in (3)
  • 0.6299 in (3)
  • 0.63 in (6)
  • 0.7087 in (1)
  • 0.748 in (1)
  • 0.75 in (5)
  • 0.8125 in (1)
  • 0.825 in (1)
  • 0.8268 in (1)
  • 0.866 in (4)
  • 0.8661 in (3)
  • 0.875 in (5)
  • 0.9449 in (1)
  • 1.0 in (4)
  • 1.0236 in (3)
  • 1.024 in (7)
  • 1.063 in (1)
  • 1.125 in (1)
  • 1.1811 in (1)
  • 1.25 in (5)
  • 1.2598 in (6)
  • 1.26 in (4)
  • 1.4173 in (1)
  • 1.45 in (1)
  • 1.496 in (3)
  • 1.4961 in (3)
  • 1.5 in (10)
  • 1.625 in (1)
  • 1.7323 in (1)
  • 1.772 in (1)
  • 1.8 in (2)
  • 1.875 in (1)
  • 1.8898 in (1)
  • 1.9 in (1)
  • 2.0 in (2)
  • 2.25 in (9)
  • 2.3622 in (1)
  • 2.55 in (1)
  • 2.5591 in (1)
  • 2.65 in (1)
  • 2.9528 in (1)
  • 3.0 in (1)
Reach Min to Reach Max
Reach
Reach
  • 6.0 mm (1)
  • 7.0 mm (2)
  • 7.938 mm (1)
  • 8.0 mm (4)
  • 9.525 mm (2)
  • 10.0 mm (3)
  • 11.0 mm (2)
  • 12.0 mm (1)
  • 12.7 mm (3)
  • 13.0 mm (8)
  • 15.875 mm (3)
  • 16.0 mm (9)
  • 18.0 mm (1)
  • 19.0 mm (1)
  • 19.05 mm (5)
  • 20.638 mm (1)
  • 20.955 mm (1)
  • 21.0 mm (1)
  • 22.0 mm (7)
  • 22.225 mm (5)
  • 24.0 mm (1)
  • 25.4 mm (4)
  • 26.0 mm (10)
  • 27.0 mm (1)
  • 28.575 mm (1)
  • 30.0 mm (1)
  • 31.75 mm (5)
  • 32.0 mm (10)
  • 36.0 mm (1)
  • 36.83 mm (1)
  • 38.0 mm (6)
  • 38.1 mm (11)
  • 41.275 mm (1)
  • 44.0 mm (1)
  • 45.0 mm (1)
  • 45.72 mm (2)
  • 47.625 mm (1)
  • 48.0 mm (1)
  • 48.26 mm (1)
  • 50.8 mm (2)
  • 57.15 mm (9)
  • 60.0 mm (1)
  • 64.77 mm (1)
  • 65.0 mm (1)
  • 67.31 mm (1)
  • 75.0 mm (1)
  • 76.2 mm (1)
Reach Min to Reach Max
Connection Style
Connection Style
  • Straight-Cylindrical (76)
  • Weldon (83)
Number of Flutes
Number of Flutes
  • 3 (41)
  • 4 (86)
  • 5 (4)
  • 6 (28)
Internal Coolant Capability
Internal Coolant Capability
Corner configuration
Corner Style
Corner Style
  • CHAMFER (74)
  • RADIUS (85)
Corner Radius
Corner Radius
  • 0.0 in (74)
  • 0.0098 in (4)
  • 0.01 in (2)
  • 0.0118 in (6)
  • 0.0177 in (7)
  • 0.0197 in (9)
  • 0.02 in (4)
  • 0.0295 in (1)
  • 0.03 in (25)
  • 0.039 in (2)
  • 0.0394 in (4)
  • 0.04 in (3)
  • 0.05 in (18)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (74)
  • 0.25 mm (4)
  • 0.254 mm (2)
  • 0.3 mm (6)
  • 0.45 mm (7)
  • 0.5 mm (10)
  • 0.508 mm (3)
  • 0.75 mm (4)
  • 0.762 mm (22)
  • 1.0 mm (6)
  • 1.016 mm (3)
  • 1.27 mm (18)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (79)
  • 0.05 mm (1)
  • 0.25 mm (3)
  • 0.3 mm (21)
  • 0.305 mm (1)
  • 0.35 mm (2)
  • 0.4 mm (2)
  • 0.5 mm (37)
  • 0.508 mm (6)
  • 0.6 mm (4)
  • 1.0 mm (2)
  • 1.12 mm (1)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (79)
  • 0.01 in (3)
  • 0.0118 in (21)
  • 0.012 in (1)
  • 0.014 in (2)
  • 0.0157 in (2)
  • 0.0197 in (37)
  • 0.02 in (7)
  • 0.0236 in (4)
  • 0.039 in (1)
  • 0.0441 in (1)
  • 0.394 in (1)
Corner Chamfer Min to Corner Chamfer Max
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • ALTIN-MW (13)
  • TIALN-LT (14)
  • TIALN-LW (1)
  • TICN-CT (1)
  • TICN-CW (9)
  • WP15PE (92)
  • WS15PE (29)
Rough Finish
Rough Finish
  • R (148)
  • FBS (8)
  • SFR (3)
Maximum Ramp Angle
Maximum Ramp Angle
  • 5.0 (15)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
Front-End
Neck Diameter
Neck Diameter
  • 0.2165 in (1)
  • 0.222 in (1)
  • 0.235 in (1)
  • 0.2953 in (1)
  • 0.2961 in (1)
  • 0.3525 in (2)
  • 0.3701 in (1)
  • 0.374 in (1)
  • 0.4331 in (1)
  • 0.4441 in (1)
  • 0.47 in (2)
  • 0.5875 in (1)
  • 0.5906 in (1)
  • 0.5921 in (1)
  • 0.705 in (2)
  • 0.7402 in (1)
  • 0.9252 in (1)
  • 0.94 in (1)
  • 0.9449 in (1)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 5.5 mm (1)
  • 5.64 mm (1)
  • 5.969 mm (1)
  • 7.5 mm (1)
  • 7.52 mm (1)
  • 8.954 mm (2)
  • 9.4 mm (1)
  • 9.5 mm (1)
  • 11.0 mm (1)
  • 11.28 mm (1)
  • 11.938 mm (2)
  • 14.923 mm (1)
  • 15.0 mm (1)
  • 15.04 mm (1)
  • 17.907 mm (2)
  • 18.8 mm (1)
  • 23.5 mm (1)
  • 23.876 mm (1)
  • 24.0 mm (1)
Neck Diameter Min to Neck Diameter Max
Back-End
Back-End Diameter
Back-End Diameter
  • 4.763 mm (2)
  • 6.0 mm (21)
  • 6.35 mm (7)
  • 7.938 mm (3)
  • 8.0 mm (14)
  • 9.525 mm (11)
  • 10.0 mm (11)
  • 12.0 mm (13)
  • 12.7 mm (12)
  • 14.0 mm (4)
  • 15.875 mm (8)
  • 16.0 mm (13)
  • 18.0 mm (1)
  • 19.05 mm (16)
  • 20.0 mm (7)
  • 25.0 mm (4)
  • 25.4 mm (12)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.1875 in (2)
  • 0.2362 in (21)
  • 0.25 in (7)
  • 0.3125 in (3)
  • 0.315 in (14)
  • 0.375 in (11)
  • 0.3937 in (11)
  • 0.4724 in (13)
  • 0.5 in (12)
  • 0.5512 in (4)
  • 0.625 in (8)
  • 0.6299 in (13)
  • 0.7087 in (1)
  • 0.75 in (16)
  • 0.7874 in (7)
  • 0.9843 in (4)
  • 1.0 in (12)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Solid Carbide End Mills • Roughers

Series 49N6 • Metric
(6 Products)
  • Slotting: Square EndSlotting: Square End
  • Ramping: BlankRamping: Blank
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Corner Style: Corner ChamferCorner Style: Corner Chamfer
  • Helix Angle: 30°Helix Angle: 30°
  • Tool Dimensions: Flute Configuration: X (variable)Tool Dimensions: Flute Configuration: X (variable)
  • Trochoidal MillingTrochoidal Milling
  • Shank - Cylindrical WeldonShank - Cylindrical Weldon
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D3] Neck Diameter [D3] Neck Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L3] Usable Length [L3] Usable Length [L] Overall Length [L] Overall Length [BCH] Corner Chamfer Width [BCH] Corner Chamfer Width [Z] Number of Flutes
3474585 49N606002MW 49N606002MW WP15PE Weldon 6.0000 .2362 6.0 .2362 5.5000 .2165 13.0000 .5118 21.0000 .8268 57.0000 2.244 0.3000 .0118 3  
    List price:
    $75.32 /each.
    Your price::
    3474587 49N608003MW 49N608003MW WP15PE Weldon 8.0000 .3150 8.0 .315 7.5000 .2953 16.0000 .6299 27.0000 1.063 63.0000 2.480 0.3000 .0118 3  
      List price:
      $84.72 /each.
      Your price::
      3474589 49N610004MW 49N610004MW WP15PE Weldon 10.0000 .3937 10.0 .3937 9.5000 .3740 22.0000 .8661 32.0000 1.259 72.0000 2.834 0.5000 .0197 4  
        List price:
        $115.48 /each.
        Your price::
        3474591 49N612005MW 49N612005MW WP15PE   Weldon 12.0000 .4724 12.0 .4724 11.0000 .4331 26.0000 1.023 38.0000 1.496 83.0000 3.267 0.5000 .0197 4
          List price:
          $152.32 /each.
          Your price::
          3474594 49N616006MW 49N616006MW WP15PE Weldon 16.0000 .6299 16.0 .6299 15.0000 .5906 32.0000 1.259 44.0000 1.732 92.0000 3.622 0.5000 .0197 4  
            List price:
            $236.02 /each.
            Your price::
            3474597 49N625008MW 49N625008MW WP15PE Weldon 25.0000 .9843 25.0 .9843 24.0000 .9449 45.0000 1.771 65.0000 2.559 121.0000 4.763 0.5000 .0197 5  
              List price:
              $492.36 /each.
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor

              ORIGINAL PRODUCT

              Solid Carbide End Mills • Roughers

              Series 4Q03 4Q05 4Q43 • Inch
              (9 Products)
              • Ramping: BlankRamping: Blank
              • Slotting: Square EndSlotting: Square End
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              • Corner Style: Corner RadiusCorner Style: Corner Radius
              • 3850338503
              • Tool Dimensions: Flute Configuration: X (variable)Tool Dimensions: Flute Configuration: X (variable)
              • Shank - Cylindrical PlainShank - Cylindrical Plain
              • Shank - Cylindrical WeldonShank - Cylindrical Weldon
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length
              5576674 4Q0305000XT 4Q0305000XT WP15PE   Straight-Cylindrical 0.2540 .0100 3 4.7630 .1875 4.763 .1875 15.8750 .6250 50.8000 2.000
                List price:
                $50.77 /each.
                Your price::
                5576675 4Q0307002XW 4Q0307002XW WP15PE Weldon 0.5080 .0200 3 6.3500 .2500 6.35 .25 19.0500 .7500 63.5000 2.500  
                  List price:
                  $58.39 /each.
                  Your price::
                  5576677 4Q0310014XW 4Q0310014XW WP15PE Weldon 0.5080 .0200 3 9.5250 .3750 9.525 .375 25.4000 1.000 63.5000 2.500  
                    List price:
                    $83.77 /each.
                    Your price::
                    5576678 4Q0313015BW 4Q0313015BW WP15PE Weldon 0.7620 .0300 3 12.7000 .5000 12.7 .5 31.7500 1.250 76.2000 3.000  
                      List price:
                      $122.69 /each.
                      Your price::
                      5576743 4Q0525008BW 4Q0525008BW WP15PE Weldon 0.7620 .0300 4 25.4000 1.000 25.4 1.0 50.8000 2.000 101.6000 4.000  
                        List price:
                        $548.96 /each.
                        Your price::
                        5576744 4Q4305000XW 4Q4305000XW WP15PE Straight-Cylindrical 0.2540 .0100 3 4.7630 .1875 4.763 .1875 7.9380 .3125 50.8000 2.000  
                          List price:
                          $45.68 /each.
                          Your price::
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor

                          ORIGINAL PRODUCT

                          Solid Carbide End Mills • Roughers

                          Series 4U80 • Metric
                          (12 Products)
                          • Tool Dimensions: Flute Configuration: X (variable)Tool Dimensions: Flute Configuration: X (variable)
                          • Helix Angle: 45°Helix Angle: 45°
                          • Corner Style: Corner RadiusCorner Style: Corner Radius
                          • Slotting: Square EndSlotting: Square End
                          • Ramping: BlankRamping: Blank
                          • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                          • Shank - Cylindrical WeldonShank - Cylindrical Weldon
                          • Shank - Cylindrical PlainShank - Cylindrical Plain
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth [L] Overall Length [L] Overall Length [Re] Corner Radius [Re] Corner Radius [Z] Number of Flutes
                          6431246 4U80M060R2TC 4U80M060R2TC WS15PE   Straight-Cylindrical 6.0000 .2362 6.0 .2362 13.0000 .5118 57.0000 2.244 0.3000 .0118 4
                            List price:
                            $71.27 /each.
                            Your price::
                            6431248 4U80M100R4TE 4U80M100R4TE WS15PE Straight-Cylindrical 10.0000 .3937 10.0 .3937 22.0000 .8661 72.0000 2.834 0.5000 .0197 4  
                              List price:
                              $96.85 /each.
                              Your price::
                              6431249 4U80M120R5TE 4U80M120R5TE WS15PE Straight-Cylindrical 12.0000 .4724 12.0 .4724 26.0000 1.023 83.0000 3.267 0.5000 .0197 4  
                                List price:
                                $125.08 /each.
                                Your price::
                                6431250 4U80M160R6TE 4U80M160R6TE WS15PE Straight-Cylindrical 16.0000 .6299 16.0 .6299 32.0000 1.259 92.0000 3.622 0.5000 .0197 6  
                                  List price:
                                  $208.15 /each.
                                  Your price::
                                  6431401 4U80M200R7TG 4U80M200R7TG WS15PE Straight-Cylindrical 20.0000 .7874 20.0 .7874 38.0000 1.496 104.0000 4.094 1.0000 .0394 6  
                                    List price:
                                    $254.91 /each.
                                    Your price::
                                    6431402 4U80M250R8TG 4U80M250R8TG WS15PE Straight-Cylindrical 25.0000 .9843 25.0 .9843 45.0000 1.771 121.0000 4.763 1.0000 .0394 6  
                                      List price:
                                      $425.83 /each.
                                      Your price::