Welcome
Please confirm your preferences
Update Preferences
Предложения по продукции
Product Family suggestions
WIDIA At Your Service
Customer Support
Find contact details to customer support centers around the globe.
Hi, User Name
Your Selected Account:
There is an issue with your account. Please contact customer support.
Sold To Account
Change Account
Ship To Account
Change Account
- Dashboard
- Manage Orders
- Manage Channels
- Address Book
-
Уведомления
Отметить все как прочитанные - Change Password
- My Profile
- Logout
Позиции
успешно добавлено в корзину
View Cart
View Cart
WIDIA At Your Service
Customer Support
Find contact details to customer support centers around the globe.
Позиции
успешно добавлено в корзину
View Cart
View Cart
Editing Solution
Adding Solution
Solution Name: {{SolutionName}}- Продукция
- /
- Серия Aluflash 3AN9 • Круглый • 3 канавки • Стандартная длина • Стандартная шейка • Цилиндрический хвостовик • Метрическая система
Sending to SolidCAM in progress...
Downloaded file will be available after import in the SolidCAM tool library.
Серия Aluflash 3AN9 • Круглый • 3 канавки • Стандартная длина • Стандартная шейка • Цилиндрический хвостовик • Метрическая система
Серия Aluflash 3AN9 • ЗУБЬЯ С РАДИУСОМ ПРИ ВЕРШИНЕ • 3 ЗУБА • Стандартная длина • Стандартная шейка • Цилиндрический хвостовик • Метрическая система
Использование и область применения
- Trochoidal Milling
- Drilling
- Helical Milling
- Plunge Milling
- Ramping: Blank
- Slotting: Square End
- Side Milling/Shoulder Milling: Square End
Material
|
螺旋插补/坡铣 0° - 15° | <="" td=""> | <="" td=""> | <="" td="" /> | ||||||||||||||
UNCOATED | Recommended feed per tooth (fz = mm/z) for helical interpolation and ramping
|
|||||||||||||||||
Cutting Speed
|
Diameter
|
|||||||||||||||||
最大深度 | Min | Start | Max | mm | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
mm | 2,5-4,8 | 4,6-7,6 | 5,8-9,5 | 6,9-11,4 | 9,2-15,2 | 11,5-19,0 | 13,8-22,8 | 16,1-26,6 | 18,4-30,4 | 20,7-34,2 | 23,0-38,0 | 28,8-47,5 | ||||||
N | 1 | 1,25 x D1 | 500 | 600 | 2000 | fz | 0,022 | 0,044 | 0,055 | 0,066 | 0,088 | 0,110 | 0,132 | 0,153 | 0,176 | 0,198 | 0,220 | 0,275 |
2 | 1,25 x D1 | 500 | 600 | 1500 | fz | 0,020 | 0,040 | 0,048 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 | |
3 | 1,25 x D1 | 500 | 600 | 1500 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
4 | 1,25 x D1 | 400 | 450 | 750 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
5 | 1,25 x D1 | 250 | 400 | 1000 | fz | 0,020 | 0,040 | 0,050 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 |
Material
|
螺旋插补/坡铣 15° - 30° | <="" td=""> | <="" td=""> | <="" td="" /> | ||||||||||||||
UNCOATED | Recommended feed per tooth (fz = mm/z) for helical interpolation and ramping
|
|||||||||||||||||
Cutting Speed
|
Diameter
|
|||||||||||||||||
最大深度 | Min | Start | Max | mm | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
mm | 2,5-4,8 | 4,6-7,6 | 5,8-9,5 | 6,9-11,4 | 9,2-15,2 | 11,5-19,0 | 13,8-22,8 | 16,1-26,6 | 18,4-30,4 | 20,7-34,2 | 23,0-38,0 | 28,8-47,5 | ||||||
N | 1 | 1,25 x D1 | 500 | 600 | 1600 | fz | 0,017 | 0,033 | 0,041 | 0,050 | 0,066 | 0,082 | 0,099 | 0,115 | 0,132 | 0,148 | 0,165 | 0,206 |
2 | 1,25 x D1 | 500 | 600 | 1200 | fz | 0,015 | 0,030 | 0,036 | 0,045 | 0,059 | 0,074 | 0,089 | 0,104 | 0,119 | 0,134 | 0,148 | 0,185 | |
3 | 1,25 x D1 | 500 | 600 | 1200 | fz | 0,012 | 0,023 | 0,029 | 0,035 | 0,046 | 0,058 | 0,069 | 0,080 | 0,092 | 0,104 | 0,115 | 0,144 | |
4 | 1,25 x D1 | 400 | 450 | 600 | fz | 0,012 | 0,023 | 0,029 | 0,035 | 0,046 | 0,058 | 0,069 | 0,080 | 0,092 | 0,104 | 0,115 | 0,144 | |
5 | 1,25 x D1 | 250 | 400 | 800 | fz | 0,015 | 0,030 | 0,038 | 0,045 | 0,059 | 0,074 | 0,089 | 0,104 | 0,119 | 0,134 | 0,148 | 0,185 |
Material
|
螺旋插补/坡铣 30° - 45° | <="" td=""> | <="" td=""> | <="" td="" /> | ||||||||||||||
UNCOATED | Recommended feed per tooth (fz = mm/z) for helical interpolation and ramping
|
|||||||||||||||||
Cutting Speed
|
Diameter
|
|||||||||||||||||
最大深度 | Min | Start | Max | mm | 3,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
mm | 2,5-4,8 | 4,6-7,6 | 5,8-9,5 | 6,9-11,4 | 9,2-15,2 | 11,5-19,0 | 13,8-22,8 | 16,1-26,6 | 18,4-30,4 | 20,7-34,2 | 23,0-38,0 | 28,8-47,5 | ||||||
N | 1 | 1,25 x D1 | 420 | 500 | 800 | fz | 0,013 | 0,026 | 0,033 | 0,040 | 0,053 | 0,066 | 0,079 | 0,092 | 0,106 | 0,119 | 0,132 | 0,165 |
2 | 1,25 x D1 | 420 | 500 | 800 | fz | 0,012 | 0,024 | 0,029 | 0,036 | 0,048 | 0,059 | 0,071 | 0,083 | 0,095 | 0,107 | 0,119 | 0,148 | |
3 | 1,25 x D1 | 420 | 500 | 800 | fz | 0,009 | 0,018 | 0,023 | 0,028 | 0,037 | 0,046 | 0,055 | 0,064 | 0,074 | 0,083 | 0,092 | 0,115 | |
4 | 1,25 x D1 | 340 | 380 | 450 | fz | 0,009 | 0,018 | 0,023 | 0,028 | 0,037 | 0,046 | 0,055 | 0,064 | 0,074 | 0,083 | 0,092 | 0,115 | |
5 | 1,25 x D1 | 210 | 340 | 600 | fz | 0,012 | 0,024 | 0,030 | 0,036 | 0,048 | 0,059 | 0,071 | 0,083 | 0,095 | 0,107 | 0,119 | 0,148 |
Material
|
<="" td=""> | <="" td=""> | <="" td="" /> | |||||||||||||||||
Plunging/Drilling | UNCOATED | Recommended feed per revolution (fn =mm/rev) for plunging 3-flute end mills | ||||||||||||||||||
Cutting Speed
|
D1
|
|||||||||||||||||||
Max Depth | Applicable | Coolant | Min | Start | Max | mm | 2,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
N | 1 | 1,5 x D | Required | 120 | 260 | 400 | fn | 0,056 | 0,084 | 0,095 | 0,105 | 0,112 | 0,140 | 0,154 | 0,165 | 0,175 | 0,186 | 0,196 | 0,210 | |
2 | 1,5 x D | Required | 120 | 250 | 280 | fn | 0,056 | 0,084 | 0,095 | 0,105 | 0,112 | 0,140 | 0,154 | 0,165 | 0,175 | 0,186 | 0,196 | 0,210 | ||
3 | 1,5 x D | Required | 100 | 200 | 260 | fn | 0,056 | 0,084 | 0,095 | 0,105 | 0,112 | 0,140 | 0,154 | 0,165 | 0,175 | 0,186 | 0,196 | 0,210 | ||
4 | 1 x D | Required | 60 | 150 | 260 | fn | 0,042 | 0,056 | 0,070 | 0,084 | 0,098 | 0,112 | 0,140 | 0,147 | 0,154 | 0,165 | 0,175 | 0,196 | ||
5 | 1,5 x D | Required | 60 | 200 | 400 | fn | 0,056 | 0,084 | 0,095 | 0,105 | 0,112 | 0,140 | 0,154 | 0,165 | 0,175 | 0,186 | 0,196 | 0,210 |
Material
|
<="" td=""> | <="" td=""> | <="" td="" /> | |||||||||||||||||
Plunging/Drilling | UNCOATED | Recommended feed per revolution (fn =mm/rev) for plunging 2-flute end mills | ||||||||||||||||||
Cutting Speed
|
D1
|
|||||||||||||||||||
Max Depth | Applicable | Coolant | Min | Start | Max | mm | 2,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
N | 1 | 1,5 x D | Required | 120 | 260 | 400 | fn | 0,080 | 0,120 | 0,135 | 0,150 | 0,160 | 0,200 | 0,220 | 0,235 | 0,250 | 0,265 | 0,280 | 0,300 | |
2 | 1,5 x D | Required | 120 | 250 | 280 | fn | 0,080 | 0,120 | 0,135 | 0,150 | 0,160 | 0,200 | 0,220 | 0,235 | 0,250 | 0,265 | 0,280 | 0,300 | ||
3 | 1,5 x D | Required | 100 | 200 | 260 | fn | 0,080 | 0,120 | 0,135 | 0,150 | 0,160 | 0,200 | 0,220 | 0,235 | 0,250 | 0,265 | 0,280 | 0,300 | ||
4 | 1 x D | Required | 60 | 150 | 260 | fn | 0,060 | 0,080 | 0,100 | 0,120 | 0,140 | 0,160 | 0,200 | 0,210 | 0,220 | 0,235 | 0,250 | 0,280 | ||
5 | 1,5 x D | Required | 60 | 200 | 400 | fn | 0,080 | 0,120 | 0,135 | 0,150 | 0,160 | 0,200 | 0,220 | 0,235 | 0,250 | 0,265 | 0,280 | 0,300 |
Material
|
<="" td=""> | <="" td=""> | <="" td="" /> | |||||||||||||||||
Side Milling (A) and Slotting (B) | UNCOATED | Recommended feed per tooth (fz = mm/z) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||||||||
A | B | Cutting Speed
|
D1
|
|||||||||||||||||
ap | ae | ap | Min | Start | Max | mm | 2,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
N | 1 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 2000 | fz | 0,022 | 0,044 | 0,055 | 0,066 | 0,088 | 0,110 | 0,132 | 0,153 | 0,176 | 0,198 | 0,220 | 0,275 |
2 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 1500 | fz | 0,020 | 0,040 | 0,048 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 | |
3 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 1500 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
4 | Ap1 max | 0,5 x D1 | 1 x D | 400 | 450 | 750 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
5 | Ap1 max | 0,5 x D1 | 1 x D | 250 | 400 | 1000 | fz | 0,020 | 0,040 | 0,050 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 |
Material
|
<="" td=""> | <="" td=""> | <="" td="" /> | |||||||||||||||||
Side Milling (A) and Slotting (B) | UNCOATED | Recommended feed per tooth (fz = mm/z) for side milling (A). For slotting (B), reduce fz by 20%. | ||||||||||||||||||
A | B | Cutting Speed
|
D1
|
|||||||||||||||||
ap | ae | ap | Min | Start | Max | mm | 2,0 | 4,0 | 5,0 | 6,0 | 8,0 | 10,0 | 12,0 | 14,0 | 16,0 | 18,0 | 20,0 | 25,0 | ||
N | 1 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 2000 | fz | 0,022 | 0,044 | 0,055 | 0,066 | 0,088 | 0,110 | 0,132 | 0,153 | 0,176 | 0,198 | 0,220 | 0,275 |
2 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 1500 | fz | 0,020 | 0,040 | 0,048 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 | |
3 | Ap1 max | 0,5 x D1 | 1 x D | 500 | 600 | 1500 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
4 | Ap1 max | 0,5 x D1 | 1 x D | 400 | 450 | 750 | fz | 0,015 | 0,031 | 0,038 | 0,046 | 0,062 | 0,077 | 0,092 | 0,107 | 0,123 | 0,138 | 0,154 | 0,192 | |
5 | Ap1 max | 0,5 x D1 | 1 x D | 250 | 400 | 1000 | fz | 0,020 | 0,040 | 0,050 | 0,059 | 0,079 | 0,099 | 0,119 | 0,138 | 0,158 | 0,178 | 0,198 | 0,247 |