New Customer
Are you new to WIDIA? Create an account and get started.
Создать учетную записьRegistered Customer
Already have an account? Sign in.
Вход в системуSelected Account
There is an issue with your account. Please Contact Customer Service.
Sold-to
Change Account
Ship To Account
Change Account
New Customer
Are you new to WIDIA? Create an account and get started.
Создать учетную записьRegistered Customer
Already have an account? Sign in.
Вход в системуSelected Account
There is an issue with your account. Please Contact Customer Service.
Sold-to
Change Account
Ship To Account
Change Account
успешно добавлено в корзину
Показать корзину
Показать корзину
Уведомления
Отметить все как прочитанные
HPGT-LD
Inserts • HPGT-LD
Обрабатываемый материал
P
Steel
M
Stainless Steel
K
Cast Iron
N
Non-Ferrous
S
High-Temp Alloys
H
Hardened Materials
Фильтры и столбцы
Filters
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
Workpiece Material
Workpiece Material
-
P Steel (4)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(4)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(4)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(4)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4)
-
-
M Stainless Steel (4)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(4)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(4)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(4)
-
-
K Cast Iron (3)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3)
-
-
N Non-Ferrous Materials (1)
-
N1Wrought Aluminum(1)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1)
-
N3High-Silicon Aluminum Alloys Si >12.2%(1)
-
-
S High-Temp Alloys (3)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
-
-
H Hardened Materials (1)
-
H1Hardened Materials 44-48 HRC(1)
-
Select All Star
-
CN (3)
-
DE (3)
application
Grade Of Cutting Tool
Grade Of Cutting Tool
-
TN6520 (1)
-
TN6525 (1)
-
WP25PM (1)
-
WP40PM (1)
-
WS40PM (1)
No filters matching ""
Измените видимые столбцы с помощью любого из перечисленных ниже параметров. Можно отобразить максимум 7 столбцов.
Показано
1- 5
. 5 результаты
Метрическая система
Дюймовая система
Показать
Метрическая система
Дюймовая система
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | First Choice | Cutting Edges per Insert | [D] Insert IC Size | [D] Insert IC Size | [S] Insert Thickness | [S] Insert Thickness | [Rε] Corner Radius | [Rε] Corner Radius | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5895784 | HPGT06T3DZERLD | HPGT225DZERLD | WP25PM | 6 | 10.9000 | .4291 | 3.9900 | .1571 | 0.9800 | .0386 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Цена по прейскуранту:
$18.46
/каждый
Ваша цена::
Кол-во
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5895785 | HPGT06T3DZERLD | HPGT225DZERLD | WP40PM | 6 | 10.9000 | .4291 | 3.9900 | .1571 | 0.9800 | .0386 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Цена по прейскуранту:
$18.46
/каждый
Ваша цена::
Кол-во
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6180312 | HPGT06T3DZERLD | HPGT225DZERLD | WS40PM | 6 | 10.9000 | .4291 | 3.9900 | .1571 | 0.9800 | .0386 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Цена по прейскуранту:
$18.82
/каждый
Ваша цена::
Кол-во
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2957547 | HPGT06T3DZERLD | HPGT225DZERLD | TN6525 | 6 | 10.9000 | .4291 | 3.9900 | .1571 | 0.9800 | .0386 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Цена по прейскуранту:
$17.57
/каждый
Ваша цена::
Кол-во
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2957585 | HPGT06T3DZERLD | HPGT225DZERLD | TN6520 | 6 | 10.9000 | .4291 | 3.9900 | .1571 | 0.9800 | .0386 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Цена по прейскуранту:
$17.57
/каждый
Ваша цена::
Кол-во
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Цена по прейскуранту:
Скидка: %
Кол-во
Продается в упаковке из
Сплавы
-
TN2510coated carbide grade
- MT-CVD-TiN-TiCN composite coating
- light machining
- machining of hardened steel, stellite and cast iron up to 64 HRC
- very good wear resistance
P SteelH Hardened MaterialsK Cast Iron -
TN5515
Coated carbide grade TN5515 has an MT-CVD-TiN-TiCN-Al203 coating. Engineered for a
balanced toughness and wear ratio. Ideal for light to medium machining of all cast irons.
K Cast Iron -
TN6510
Coated carbide grade TN6510 has a PVD-TiAlN multilayer. It performs well in light to medium
machining of all cast irons.
K Cast Iron -
TN6520
Grade TN6520 has a PVD-TiAlN multilayer. It is engineeered for light and medium machining of all
types of cast irons.
K Cast Iron -
TN6525
Carbide grade TN6525 has aPVD-TiAlN multilayer. It is ideal for light and medium machining
applications in steels and high-strength nodular cast irons.
P SteelK Cast IronM Stainless Steel -
TN6540
Coated carbide grade TN6540 has a PVD-TiAlN multilayer and is excellent for medium and heavy
machining applications. It is ideal for use in all steels and nodular cast irons.
P SteelS High-Temp AlloysK Cast IronM Stainless Steel -
TN7525
MT-CVD/CVD — TiN-TiCN-Al2O3-TiN coated carbide. Light and medium machining for steels and nodular cast irons.
P SteelM Stainless Steel -
TN7535
MT-CVD/CVD — TiN-TiCN-Al2O3 coated carbide. Medium and heavy machining for steels and nodular cast iron.
P SteelK Cast IronM Stainless Steel -
WP25PMP SteelS High-Temp AlloysH Hardened MaterialsK Cast IronM Stainless Steel
-
WP40PMP SteelS High-Temp AlloysM Stainless Steel
-
WS40PMP SteelS High-Temp AlloysM Stainless SteelN Non-Ferrous
Рекомендации по выбору режущих пластин
| Grupa materiałowa | Obróbka lekka | Obróbka średnia | Obróbka ciężka | |||
| Geometria | Gatunek | Geometria | Gatunek | Geometria | Gatunek | |
| P1–P2 | .E..LD | WP40PM | .E..GD | WP40PM | .E..GD | WP40PM |
| P3–P4 | .E..LD | WP25PM | .E..GD | WS40PM | .E..GD | WS40PM |
| P5–P6 | .E..LD | WP25PM | .E..GD | WP25PM | .E..GD | WP25PM |
| M1–M2 | .E..LD | WP25PM | .E..GD | WP25PM | .E..GD | WP25PM |
| M3 | .E..LD | WP40PM | .E..GD | WS30PM | .E..GD | WS30PM |
| K1–K2 | .E..GD | TN6510 | .E..GD | WK15CM | .E..GD | WK15CM |
| K3 | .E..LD | TN6520 | .E..GD | WP25PM | .E..GD | WP25PM |
| N1–N2 | .E..LD | WS40PM | .E..GD | WS40PM | .E..GD | WS40PM |
| N3 | .E..LD | WS40PM | .E..GD | WS40PM | .E..GD | WS40PM |
Рекомендуемые значения подач [мм/зуб]
| Geometria płytki | Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | Geometria płytki | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40 100 % | ||||||||||||
| .F..LDAL | 0,13 | 0,34 | 0,47 | 0,10 | 0,25 | 0,34 | 0,07 | 0,18 | 0,25 | 0,06 | 0,16 | 0,22 | 0,06 | 0,15 | 0,20 | .F..LDAL |
| .E..LD | 0,13 | 0,34 | 0,47 | 0,10 | 0,25 | 0,34 | 0,07 | 0,18 | 0,25 | 0,06 | 0,16 | 0,22 | 0,06 | 0,15 | 0,20 | .E..LD |
| .E..GD | 0,13 | 0,48 | 0,54 | 0,10 | 0,35 | 0,39 | 0,07 | 0,26 | 0,29 | 0,06 | 0,23 | 0,25 | 0,06 | 0,21 | 0,23 | .E..GD |
| Obróbka lekka | Obróbka średnia | Obróbka ciężka |
Recommended Starting Feeds [IPT]
| Geometria płytki | Zalecany posuw na ostrze (fz) zależny od % szerokości frezowania (ae) | Geometria płytki | ||||||||||||||
| 5% | 10% | 20% | 30% | 40 100% | ||||||||||||
| .F..LDAL | .005 | .013 | .018 | .004 | .010 | .013 | .003 | .007 | .010 | .003 | .006 | .009 | .002 | .006 | .008 | .F..LDAL |
| .E..LD | .005 | .013 | .018 | .004 | .010 | .013 | .003 | .007 | .010 | .003 | .006 | .009 | .002 | .006 | .008 | .E..LD |
| .E..GD | .005 | .019 | .021 | .004 | .014 | .015 | .003 | .010 | .011 | .003 | .009 | .010 | .002 | .008 | .009 | .E..GD |
| Obróbka lekka | Obróbka średnia | Obróbka ciężka |
Рекомендуемые значения начальных скоростей резания [м/мин]
| Grupa materiałowa | TN6510 | TN6520 | TN6525 | TN6540 | WK15CM | |||||||||||
| P | 1 | – | – | – | – | – | – | 410 | 320 | 280 | 360 | 280 | 240 | – | – | – |
| 2 | – | – | – | – | – | – | 320 | 250 | 215 | 250 | 190 | 170 | – | – | – | |
| 3 | – | – | – | – | – | – | 280 | 215 | 185 | 215 | 170 | 140 | – | – | – | |
| 4 | – | – | – | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | – | – | – | |
| 5 | – | – | – | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | – | – | – | |
| 6 | – | – | – | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | – | – | – | |
| M | 1 | – | – | – | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 | – | – | – |
| 2 | – | – | – | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | – | – | – | |
| 3 | – | – | – | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | – | – | – | |
| K | 1 | 480 | 350 | 260 | 450 | 320 | 230 | 275 | 245 | 220 | 220 | 205 | 180 | 505 | 460 | 410 |
| 2 | 420 | 280 | 205 | 390 | 250 | 190 | 215 | 190 | 180 | 175 | 155 | 140 | 400 | 355 | 330 | |
| 3 | 335 | 260 | 200 | 300 | 230 | 160 | 180 | 160 | 145 | 155 | 145 | 125 | 335 | 300 | 275 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 50 | 35 | 30 | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 25 | 20 | 10 | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 70 | 40 | 30 | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 60 | 30 | 25 | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Grupa materiałowa | WP25PM | WP40PM | WS30PM | WS40PM | THM-U | THM | |||||||||||||
| P | 1 | 395 | 340 | 325 | 355 | 310 | 295 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 330 | 290 | 240 | 300 | 260 | 215 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 305 | 260 | 210 | 275 | 235 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | 270 | 220 | 180 | 245 | 205 | 160 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | 220 | 205 | 180 | 205 | 185 | 160 | – | – | – | 205 | 175 | 145 | – | – | – | – | – | – | |
| 6 | 200 | 150 | 120 | 180 | 140 | 110 | – | – | – | 180 | 130 | 95 | – | – | – | – | – | – | |
| M | 1 | 245 | 215 | 200 | 235 | 205 | 185 | 270 | 240 | 220 | 250 | 205 | 170 | – | – | – | – | – | – |
| 2 | 220 | 190 | 155 | 210 | 180 | 150 | 245 | 215 | 175 | 215 | 175 | 145 | – | – | – | – | – | – | |
| 3 | 170 | 145 | 115 | 155 | 140 | 110 | 185 | 160 | 125 | 175 | 130 | 100 | – | – | – | – | – | – | |
| K | 1 | 275 | 245 | 220 | – | – | – | – | – | – | – | – | – | 230 | 205 | 180 | 145 | 110 | 90 |
| 2 | 215 | 190 | 180 | – | – | – | – | – | – | – | – | – | – | – | – | 150 | 120 | 85 | |
| 3 | 180 | 160 | 145 | – | – | – | – | – | – | – | – | – | – | – | – | 155 | 115 | 70 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 2400 | 1440 | 1200 | 1080 | 720 | 600 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 1640 | 980 | 800 | 820 | 560 | 460 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 960 | 600 | 480 | 540 | 335 | 240 | |
| S | 1 | 50 | 40 | 30 | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – |
| 2 | 50 | 40 | 30 | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – | |
| 3 | 60 | 50 | 30 | 60 | 50 | 35 | 65 | 55 | 35 | 60 | 50 | 30 | – | – | – | – | – | – | |
| 4 | 85 | 60 | 40 | 80 | 60 | 40 | 100 | 70 | 50 | 70 | 60 | 35 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
Recommended Starting Speeds [SFM]
| Grupa materiałowa | THM | THM-U | TN6510 | TN6520 | TN6525 | TN6540 | |||||||||||||
| P | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 1340 | 1045 | 925 | 1180 | 925 | 785 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 1045 | 830 | 710 | 830 | 630 | 550 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 925 | 710 | 610 | 710 | 550 | 450 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | 770 | 550 | 475 | 590 | 430 | 355 | |
| 5 | – | – | – | – | – | – | – | – | – | – | – | – | 1025 | 770 | 650 | 785 | 590 | 490 | |
| 6 | – | – | – | – | – | – | – | – | – | – | – | – | 670 | 535 | 430 | 535 | 395 | 335 | |
| M | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 630 | 395 | 260 | 430 | 260 | 200 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 395 | 260 | 155 | 260 | 155 | 140 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 415 | 260 | 180 | 275 | 155 | 140 | |
| K | 1 | 475 | 355 | 295 | 750 | 670 | 590 | 1570 | 1140 | 845 | 1475 | 1045 | 750 | 905 | 805 | 725 | 725 | 670 | 590 |
| 2 | 490 | 395 | 275 | – | – | – | 1380 | 925 | 670 | 1280 | 830 | 630 | 710 | 630 | 590 | 570 | 510 | 450 | |
| 3 | 510 | 370 | 235 | – | – | – | 1105 | 845 | 650 | 985 | 750 | 535 | 590 | 535 | 475 | 510 | 475 | 415 | |
| N | 1 | 3540 | 2365 | 1970 | 7870 | 4720 | 3935 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 2695 | 1830 | 1520 | 5370 | 3210 | 2615 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 1770 | 1105 | 785 | 3150 | 1970 | 1570 | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 155 | 120 | 95 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 80 | 60 | 40 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 235 | 140 | 95 | |
| 4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 200 | 95 | 80 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Grupa materiałowa | WK15CM | WP25PM | WP40PM | WS30PM | WS40PM | |||||||||||
| P | 1 | – | – | – | 1295 | 1120 | 1060 | 1165 | 1025 | 965 | – | – | – | 915 | 800 | 750 |
| 2 | – | – | – | 1080 | 940 | 785 | 985 | 845 | 710 | – | – | – | 770 | 670 | 555 | |
| 3 | – | – | – | 1000 | 845 | 690 | 905 | 770 | 630 | – | – | – | 705 | 605 | 490 | |
| 4 | – | – | – | 890 | 725 | 590 | 805 | 670 | 535 | – | – | – | 635 | 520 | 425 | |
| 5 | – | – | – | 725 | 670 | 590 | 670 | 610 | 535 | – | – | – | 520 | 455 | 425 | |
| 6 | – | – | – | 650 | 490 | 395 | 590 | 450 | 355 | – | – | – | 455 | 360 | 275 | |
| M | 1 | – | – | – | 805 | 710 | 650 | 770 | 670 | 610 | 890 | 785 | 725 | 850 | 620 | 375 |
| 2 | – | – | – | 725 | 630 | 510 | 690 | 590 | 490 | 805 | 710 | 570 | 750 | 555 | 340 | |
| 3 | – | – | – | 550 | 475 | 370 | 510 | 450 | 355 | 610 | 535 | 415 | 620 | 455 | 260 | |
| K | 1 | 1655 | 1520 | 1340 | 905 | 805 | 725 | – | – | – | – | – | – | – | – | – |
| 2 | 1320 | 1165 | 1080 | 710 | 630 | 590 | – | – | – | – | – | – | – | – | – | |
| 3 | 1105 | 985 | 905 | 590 | 535 | 475 | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 3525 | 3100 | 3100 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 3100 | 2870 | 2770 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 2870 | 2490 | 2490 | |
| S | 1 | – | – | – | 155 | 140 | 95 | 155 | 140 | 120 | 180 | 155 | 120 | 200 | 145 | 85 |
| 2 | – | – | – | 155 | 140 | 95 | 155 | 140 | 120 | 180 | 155 | 120 | 180 | 130 | 85 | |
| 3 | – | – | – | 200 | 155 | 95 | 200 | 155 | 120 | 215 | 180 | 120 | 205 | 150 | 95 | |
| 4 | – | – | – | 275 | 200 | 140 | 260 | 200 | 140 | 335 | 235 | 155 | 295 | 215 | 135 | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |