Предложения по продукции

Product Family suggestions

успешно добавлено в корзину
Показать корзину

Уведомления

Отметить все как прочитанные
Mobile Menu

Корпуса инструментов

Выбрать фильтры
Filters
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (46)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (46)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (46)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (46)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (46)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (46)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (46)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (46)
  • M Stainless Steel (46)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (46)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (46)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (46)
  • K Cast Iron (46)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (46)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (46)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (46)
  • N Non-Ferrous Materials (46)
    • N1
      Wrought Aluminum
      (46)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (46)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (46)
  • S High-Temp Alloys (46)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (46)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (46)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (46)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (46)
  • H Hardened Materials (46)
    • H1
      Hardened Materials 44-48 HRC
      (46)
    • H2
      Hardened Materials 48-55 HRC
      (46)
    • H3
      Hardened Materials 56-60 HRC
      (46)
Select All Star
  • CN (8)
  • DE (11)
  • GB (1)
  • IN (9)
Applications
Applications
  • Face Milling Face Milling (44)
  • Shoulder Milling Shoulder Milling (44)
  • Shoulder Square End Shoulder Square End (42)
  • Slot Milling Slot Milling (44)
  • Slot Square End Slot Square End (42)
Cutting Diameter
Cutting Diameter
  • 0.63 in (1)
  • 0.75 in (2)
  • 0.787 in (1)
  • 0.984 in (3)
  • 1.0 in (8)
  • 1.25 in (4)
  • 1.26 in (3)
  • 1.379 in (1)
  • 1.5 in (9)
  • 1.575 in (3)
  • 1.969 in (2)
  • 2.0 in (4)
  • 2.48 in (1)
  • 2.5 in (2)
  • 3.0 in (1)
  • 3.15 in (1)
  • 3.938 in (1)
  • 4.0 in (4)
  • 4.921 in (1)
  • 5.0 in (2)
  • 6.0 in (2)
  • 6.299 in (1)
  • 8.0 in (1)
Cutting Diameter Min до Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 16.0 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (1)
  • 25.0 mm (3)
  • 25.401 mm (8)
  • 31.75 mm (4)
  • 32.0 mm (3)
  • 35.0 mm (1)
  • 38.1 mm (9)
  • 40.0 mm (3)
  • 50.0 mm (2)
  • 50.801 mm (4)
  • 63.0 mm (1)
  • 63.5 mm (2)
  • 76.2 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (4)
  • 125.0 mm (1)
  • 127.0 mm (2)
  • 152.4 mm (2)
  • 160.0 mm (1)
  • 203.201 mm (1)
Cutting Diameter Min до Cutting Diameter Max
Cutting Length
Cutting Length
  • 8.9 mm (3)
  • 9.0 mm (4)
  • 13.976 mm (37)
  • 14.0 mm (12)
  • 15.3 mm (1)
  • 15.351 mm (1)
Cutting Length Min до Cutting Length Max
Cutting Length
Cutting Length
  • 0.351 in (3)
  • 0.354 in (4)
  • 0.55 in (37)
  • 0.551 in (12)
  • 0.602 in (1)
  • 0.604 in (1)
Cutting Length Min до Cutting Length Max
Reach
Reach
  • 1.063 in (1)
  • 1.181 in (1)
  • 1.25 in (1)
  • 1.26 in (1)
  • 1.469 in (1)
  • 1.47 in (1)
  • 1.5 in (3)
  • 1.536 in (2)
  • 1.575 in (8)
  • 1.67 in (1)
  • 1.72 in (5)
  • 1.75 in (2)
  • 1.772 in (1)
  • 1.969 in (3)
  • 2.0 in (8)
  • 2.119 in (1)
  • 2.12 in (2)
  • 2.25 in (1)
  • 2.48 in (2)
  • 2.5 in (3)
  • 2.719 in (1)
  • 2.721 in (1)
  • 3.0 in (2)
  • 3.72 in (1)
  • 4.0 in (1)
  • 4.12 in (1)
  • 6.0 in (2)
  • 6.12 in (1)
Reach Min до Reach Max
Reach
Reach
  • 27.0 mm (1)
  • 30.0 mm (1)
  • 31.75 mm (1)
  • 32.0 mm (1)
  • 37.325 mm (1)
  • 37.35 mm (1)
  • 38.1 mm (3)
  • 39.0 mm (2)
  • 40.0 mm (8)
  • 42.426 mm (1)
  • 43.676 mm (2)
  • 43.7 mm (3)
  • 44.45 mm (2)
  • 45.0 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (8)
  • 53.825 mm (1)
  • 53.85 mm (2)
  • 57.151 mm (1)
  • 63.0 mm (2)
  • 63.5 mm (3)
  • 69.075 mm (1)
  • 69.101 mm (1)
  • 76.2 mm (2)
  • 94.5 mm (1)
  • 101.601 mm (1)
  • 104.65 mm (1)
  • 152.4 mm (2)
  • 155.451 mm (1)
Reach Min до Reach Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (19)
  • B-Cutter Retention Screw (3)
  • C-Bolt Circle (1)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (4)
  • Straight-Cylindrical (1)
  • Weldon (29)
Number of Flutes
Number of Flutes
  • 1 (1)
  • 10 (1)
  • 12 (2)
  • 2 (12)
  • 3 (17)
  • 4 (11)
  • 5 (7)
  • 6 (2)
  • 7 (1)
  • 8 (3)
  • 9 (1)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (46)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.016 in (46)
  • 0.031 in (46)
  • 0.047 in (46)
  • 0.063 in (46)
  • 0.066 in (42)
  • 0.079 in (46)
  • 0.098 in (42)
  • 0.125 in (42)
  • 0.157 in (42)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (46)
  • 0.8 mm (46)
  • 1.201 mm (46)
  • 1.6 mm (46)
  • 1.675 mm (42)
  • 2.0 mm (46)
  • 2.5 mm (42)
  • 3.176 mm (42)
  • 4.0 mm (42)
Corner Radius Min до Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (46)
Corner Chamfer Min до Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (46)
Corner Chamfer Min до Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (46)
  • THM-U (42)
  • THR (46)
  • TN2510 (46)
  • TN25M (46)
  • TN450 (46)
  • TN5515 (46)
  • TN6501 (42)
  • TN6502 (42)
  • TN6510 (42)
  • TN6520 (42)
  • TN6525 (42)
  • TN6540 (42)
  • TN7525 (46)
  • TN7535 (46)
  • TTI25 (46)
  • TTM08 (46)
  • TTR (42)
  • WK15CM (46)
  • WK15PM (4)
  • WP35CM (46)
  • WP40PM (42)
  • WS30PM (42)
  • WU20PM (46)
Rough Finish
Rough Finish
  • FR (7)
frontEnd
Insert Shape
Insert Shape
  • X-PARALLELOGRAM 80 (46)
  • X-RECTANGLE MILL 4 90 (42)
  • X-RH0MBIC 70 (4)
Center Cutting
Center Cutting
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (30)
  • SCREW-ON (4)
  • SHELL MILL (24)
Back-End Diameter
Back-End Diameter
  • 16.0 mm (1)
  • 19.05 mm (7)
  • 20.0 mm (1)
  • 22.0 mm (4)
  • 24.375 mm (1)
  • 25.0 mm (2)
  • 25.401 mm (7)
  • 27.0 mm (1)
  • 28.0 mm (3)
  • 31.75 mm (15)
  • 32.0 mm (4)
  • 38.1 mm (4)
  • 40.0 mm (2)
  • 50.801 mm (5)
  • 63.5 mm (1)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.63 in (1)
  • 0.75 in (7)
  • 0.787 in (1)
  • 0.866 in (4)
  • 0.96 in (1)
  • 0.984 in (2)
  • 1.0 in (7)
  • 1.063 in (1)
  • 1.102 in (3)
  • 1.25 in (15)
  • 1.26 in (4)
  • 1.5 in (4)
  • 1.575 in (2)
  • 2.0 in (5)
  • 2.5 in (1)
Back-End Diameter Min до Back-End Diameter Max
No filters matching ""
Показать ассортимент в
Метрическая система
Дюймовая система

ОРИГИНАЛЬНЫЙ ПРОДУКТ

M680-16 • Shell Mills • Metric M680-16 • Shell Mills • Metric

Shell Mills • Metric
(8 Products)
  • Milling - Side and FaceMilling - Side and Face
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • Slotting: Square EndSlotting: Square End
  • Face MillingFace Milling
  • Milling - Through CoolantMilling - Through Coolant
Посмотреть ассортимент
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
2003535 12396903600 12396903600 W   40.0000 1.575 22.0 .8661 38.9900 1.535 45.0000 1.772 15.2970 .6022 4 14000 Y 0.23
    Цена по прейскуранту:
    $373.25 /каждый
    Ваша цена::
    2003553 12396903800 12396903800 W   50.0000 1.969 22.0 .8661 42.0000 1.654 40.0000 1.575 14.0000 .5510 4 12500 Y 0.30
      Цена по прейскуранту:
      $435.58 /каждый
      Ваша цена::
      2003554 12396904000 12396904000 W   50.0000 1.969 22.0 .8661 42.0000 1.654 40.0000 1.575 14.0000 .5512 5 12500 Y 0.30
        Цена по прейскуранту:
        $469.87 /каждый
        Ваша цена::
        2003561 12396904200 12396904200 W   63.0000 2.480 22.0 .8661 50.0000 1.969 40.0000 1.575 14.0000 .5510 5 11000 Y 0.50
          Цена по прейскуранту:
          $512.16 /каждый
          Ваша цена::
          2003578 12396904600 12396904600 W   80.0000 3.150 27.0 1.063 60.0000 2.362 50.0000 1.969 14.0000 .5510 6 9500 Y 1.00
            Цена по прейскуранту:
            $578.17 /каждый
            Ваша цена::
            2003594 12396905000 12396905000 W   100.0000 3.937 32.0 1.259 78.0000 3.071 50.0000 1.969 14.0000 .5510 8 8500 N 1.40
              Цена по прейскуранту:
              $688.72 /каждый
              Ваша цена::
              Цена по прейскуранту:
              Скидка: %
              Ваша цена::
              Замена Данный товар недоступен
              Продукция для замены Данный товар можно приобрести у дистрибьютора

              ОРИГИНАЛЬНЫЙ ПРОДУКТ

              M680-16 • Weldon® End Mills • Metric M680-16 • Weldon® End Mills • Metric

              Weldon® End Mills • Metric
              (3 Products)
              • Shank - Cylindrical Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              • Slotting: Square EndSlotting: Square End
              • Face MillingFace Milling
              • Milling - Through CoolantMilling - Through Coolant
              Посмотреть ассортимент
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
              2003475 12396922600 12396922600 W   25.0000 .9840 25.0 .9843 96.0000 3.779 39.0000 1.535 13.9700 .5500 2 17600 Y 0.30
                Цена по прейскуранту:
                $294.32 /каждый
                Ваша цена::
                2003515 12396923000 12396923000 W   32.0000 1.260 32.0 1.259 100.0000 3.937 39.0000 1.535 15.3600 .6046 3 15600 Y 0.51
                  Цена по прейскуранту:
                  $330.89 /каждый
                  Ваша цена::
                  2003539 12396923400 12396923400 W   40.0000 1.575 32.0 1.259 110.0000 4.331 50.0000 1.969 14.0000 .5512 4 14000 Y 0.80
                    Цена по прейскуранту:
                    $411.70 /каждый
                    Ваша цена::
                    Цена по прейскуранту:
                    Скидка: %
                    Ваша цена::
                    Замена Данный товар недоступен
                    Продукция для замены Данный товар можно приобрести у дистрибьютора

                    ОРИГИНАЛЬНЫЙ ПРОДУКТ

                    M680-16 • Screw-On End Mills • Metric M680-16 • Screw-On End Mills • Metric

                    Screw-On End Mills • Metric
                    (4 Products)
                    • Shank - Screw-OnShank - Screw-On
                    • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                    • Slotting: Square EndSlotting: Square End
                    • Face MillingFace Milling
                    • Milling - Through CoolantMilling - Through Coolant
                    Посмотреть ассортимент
                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                    2003477 12396932600 12396932600 W   25.0000 .9840 24.37 .9594 12.5000 .4921 M12 52.0000 2.047 30.0000 1.181 19.0000 .7480 14.0000 .5512 2 8800 Y 0.20
                      Цена по прейскуранту:
                      $297.19 /каждый
                      Ваша цена::
                      2003517 12396933000 12396933000 W   32.0000 1.260 28.0 1.102 17.0000 .6693 M16 63.0000 2.480 40.0000 1.575 22.0000 .8661 14.0000 .5512 3 7800 Y 0.30
                        Цена по прейскуранту:
                        $313.17 /каждый
                        Ваша цена::
                        2003521 12396933200 12396933200 W   35.0000 1.378 28.0 1.102 17.0000 .6693 M16 63.0000 2.480 40.0000 1.574 22.0000 .8661 14.0000 .5512 3 7200 Y 0.30
                          Цена по прейскуранту:
                          $330.89 /каждый
                          Ваша цена::
                          2003540 12396933400 12396933400 W   40.0000 1.574 28.0 1.102 17.0000 .6693 M16 63.0000 2.480 40.0000 1.574 22.0000 .8661 14.0000 .5512 4 7000 Y 0.30
                            Цена по прейскуранту:
                            $363.90 /каждый
                            Ваша цена::
                            Цена по прейскуранту:
                            Скидка: %
                            Ваша цена::
                            Замена Данный товар недоступен
                            Продукция для замены Данный товар можно приобрести у дистрибьютора

                            ОРИГИНАЛЬНЫЙ ПРОДУКТ

                            M680-16 • Weldon® End Mills • Metric M680-16 • Weldon® End Mills • Metric

                            Weldon® End Mills • Metric
                            (9 Products)
                            • Shank - Cylindrical Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                            • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                            • Slotting: Square EndSlotting: Square End
                            • Face MillingFace Milling
                            Посмотреть ассортимент
                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                            2002366 12396920400 12396920400 W   16.0000 .6300 16.0 .6299 75.0000 2.953 27.0000 1.063 9.0000 .3540 2 28000 N 0.10
                              Цена по прейскуранту:
                              $200.80 /каждый
                              Ваша цена::
                              2002369 12396920600 12396920600 W   20.0000 .7870 20.0 .7874 82.0000 3.228 32.0000 1.260 9.0000 .3540 2 27000 Y 0.30
                                Цена по прейскуранту:
                                $248.00 /каждый
                                Ваша цена::
                                2119934 15396320600 15396320600     19.0500 .7500 19.05 .75 88.9000 3.500 37.3130 1.469 8.8900 .3500 2 27000 Y 0.15
                                  Данный товар недоступен
                                  Данный товар можно приобрести у дистрибьютора
                                  Ваша цена::
                                  2119935 15396320800 15396320800     25.4000 1.000 25.4 1.0 101.6000 4.000 43.6630 1.719 8.8900 .3500 3 24000 Y 0.35
                                    Данный товар недоступен
                                    Данный товар можно приобрести у дистрибьютора
                                    Ваша цена::
                                    2119939 15396321200 15396321200     38.1000 1.500 31.75 1.25 111.7600 4.400 53.8230 2.119 8.8900 .3500 5 19000 Y 0.70
                                      Данный товар недоступен
                                      Данный товар можно приобрести у дистрибьютора
                                      Ваша цена::
                                      2119944 15396323000 15396323000     31.7500 1.250 31.75 1.25 101.6000 4.000 43.6630 1.719 13.9700 .5500 3 15500 Y 0.50
                                        Данный товар недоступен
                                        Данный товар можно приобрести у дистрибьютора
                                        Ваша цена::
                                        Цена по прейскуранту:
                                        Скидка: %
                                        Ваша цена::
                                        Замена Данный товар недоступен
                                        Продукция для замены Данный товар можно приобрести у дистрибьютора

                                        ОРИГИНАЛЬНЫЙ ПРОДУКТ

                                        M680 • Shell Mills • Inch M680 • Shell Mills • Inch

                                        Shell Mills
                                        (16 Products)
                                        • Milling - Side and FaceMilling - Side and Face
                                        • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                        • Slotting: Square EndSlotting: Square End
                                        • Face MillingFace Milling
                                        • Milling - Through CoolantMilling - Through Coolant
                                        Посмотреть ассортимент
                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Pounds
                                        2646755 M680D150Z04S075XP16 M680D150Z04S075XP16 38.1000 1.500 19.05 .75 35.5600 1.400 44.4500 1.750 13.9700 .5500 4 14000 Y 0.45
                                          Данный товар недоступен
                                          Данный товар можно приобрести у дистрибьютора
                                          Ваша цена::
                                          2646758 M680D200Z03S075XP16 M680D200Z03S075XP16 50.8000 2.000 19.05 .75 43.1800 1.700 38.1000 1.500 13.9700 .5500 3 12500 Y 0.60
                                            Данный товар недоступен
                                            Данный товар можно приобрести у дистрибьютора
                                            Ваша цена::
                                            2646759 M680D200Z04S075XP16 M680D200Z04S075XP16 50.8000 2.000 19.05 .75 43.1800 1.700 38.1000 1.500 13.9700 .5500 4 12500 Y 0.60
                                              Данный товар недоступен
                                              Данный товар можно приобрести у дистрибьютора
                                              Ваша цена::
                                              2646760 M680D200Z05S075XP16 M680D200Z05S075XP16 50.8000 2.000 19.05 .75 43.1800 1.700 38.1000 1.500 13.9700 .5500 5 12500 Y 0.60
                                                Цена по прейскуранту:
                                                $285.74 /каждый
                                                Ваша цена::
                                                2646762 M680D250Z03S100XP16 M680D250Z03S100XP16 63.5000 2.500 25.4 1.0 55.8800 2.200 50.8000 2.000 13.9700 .5500 3 11000 Y 1.15
                                                  Данный товар недоступен
                                                  Данный товар можно приобрести у дистрибьютора
                                                  Ваша цена::
                                                  2646763 M680D250Z05S100XP16 M680D250Z05S100XP16 63.5000 2.500 25.4 1.0 55.8800 2.200 44.4500 1.750 13.9700 .5500 5 11000 Y 1.30
                                                    Данный товар недоступен
                                                    Данный товар можно приобрести у дистрибьютора
                                                    Ваша цена::
                                                    Цена по прейскуранту:
                                                    Скидка: %
                                                    Ваша цена::
                                                    Замена Данный товар недоступен
                                                    Продукция для замены Данный товар можно приобрести у дистрибьютора

                                                    ОРИГИНАЛЬНЫЙ ПРОДУКТ

                                                    M680 • Weldon® Shank • Inch M680 • Weldon® Shank • Inch

                                                    Weldon® Shanks
                                                    (18 Products)
                                                    • Shank - Cylindrical Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                                                    • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                                    • Slotting: Square EndSlotting: Square End
                                                    • Face MillingFace Milling
                                                    • Milling - Through CoolantMilling - Through Coolant
                                                    Посмотреть ассортимент
                                                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Pounds
                                                    2646674 M680D075Z01W075XP16 M680D075Z01W075XP16 W 19.0500 .7500 19.05 .75 88.9000 3.500 37.3380 1.470 13.9700 .5500 1 17500 Y 0.66
                                                      Данный товар недоступен
                                                      Данный товар можно приобрести у дистрибьютора
                                                      Ваша цена::
                                                      2646687 M680D100Z02W075XP16 M680D100Z02W075XP16 W 25.4000 1.000 19.05 .75 93.9800 3.700 42.4180 1.670 13.9700 .5500 2 17500 Y 0.70
                                                        Данный товар недоступен
                                                        Данный товар можно приобрести у дистрибьютора
                                                        Ваша цена::
                                                        2646688 M680D100Z02W100XP16 M680D100Z02W100XP16 W 25.4000 1.000 25.4 1.0 101.6000 4.000 43.6880 1.720 13.9700 .5500 2 17500 Y 0.75
                                                          Цена по прейскуранту:
                                                          $250.01 /каждый
                                                          Ваша цена::
                                                          2646689 M680D100Z02W100XP16L528 M680D100Z02W100XP16L528 W 25.4000 1.000 25.4 1.0 134.1120 5.280 76.2000 3.000 13.9700 .5500 2 17500 Y 1.10
                                                            Данный товар недоступен
                                                            Данный товар можно приобрести у дистрибьютора
                                                            Ваша цена::
                                                            2646690 M680D100Z02W100XP16L800 M680D100Z02W100XP16L800 W 25.4000 1.000 25.4 1.0 203.2000 8.000 57.1500 2.250 13.9700 .5500 2 17500 Y 1.70
                                                              Данный товар недоступен
                                                              Данный товар можно приобрести у дистрибьютора
                                                              Ваша цена::
                                                              2646691 M680D100Z02W125XP16 M680D100Z02W125XP16 W 25.4000 1.000 31.75 1.25 127.0000 5.000 69.0880 2.720 13.9700 .5500 2 17500 Y 1.10
                                                                Данный товар недоступен
                                                                Данный товар можно приобрести у дистрибьютора
                                                                Ваша цена::
                                                                Цена по прейскуранту:
                                                                Скидка: %
                                                                Ваша цена::
                                                                Замена Данный товар недоступен
                                                                Продукция для замены Данный товар можно приобрести у дистрибьютора
                                                                product-image
                                                                Please adjust the following properties from

                                                                Номер по каталогу ISO

                                                                Номер по каталогу ANSI

                                                                to find similar products.
                                                                Вы собираетесь создать дубликат </