Корпуса инструментов
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
Workpiece Material
Workpiece Material
-
P Steel (16)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (16)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (16)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (16)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (16)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (16)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (16)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (16)
-
-
M Stainless Steel (16)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (16)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (16)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (16)
-
-
K Cast Iron (16)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (16)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (16)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (16)
-
-
N Non-Ferrous Materials (16)
-
N1Wrought Aluminum (16)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (16)
-
N3High-Silicon Aluminum Alloys Si >12.2% (16)
-
-
S High-Temp Alloys (16)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (16)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (16)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (16)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (16)
-
-
H Hardened Materials (16)
-
H1Hardened Materials 44-48 HRC (16)
-
Select All Star
-
IN (3)
Applications
Applications
-
Face Milling (16)
-
Pocket (16)
-
Pocket Milling (16)
-
Profile Milling (16)
-
Shoulder Ball Nose (16)
-
Shoulder Milling (16)
-
-
Slot Milling (16)
-
Slot Square End (16)
Cutting Diameter
Cutting Diameter
-
1.339 in (1)
-
1.37 in (1)
-
1.417 in (1)
-
1.85 in (2)
-
1.87 in (1)
-
1.969 in (1)
-
2.37 in (2)
-
2.52 in (2)
-
3.307 in (2)
-
3.37 in (2)
-
4.291 in (1)
до
Cutting Diameter
Cutting Diameter
-
34.0 mm (1)
-
34.801 mm (1)
-
36.0 mm (1)
-
47.0 mm (2)
-
47.5 mm (1)
-
50.0 mm (1)
-
60.2 mm (2)
-
64.0 mm (2)
-
84.0 mm (2)
-
85.601 mm (2)
-
109.0 mm (1)
до
Maximum Cutting Diameter
Maximum Cutting Diameter
-
50.0 mm (1)
-
50.801 mm (1)
-
52.0 mm (1)
-
63.0 mm (2)
-
63.5 mm (1)
-
66.0 mm (1)
-
76.2 mm (2)
-
80.0 mm (2)
-
100.0 mm (2)
-
101.601 mm (2)
-
125.0 mm (1)
до
Maximum Cutting Diameter
Maximum Cutting Diameter
-
1.969 in (1)
-
2.0 in (1)
-
2.047 in (1)
-
2.48 in (2)
-
2.5 in (1)
-
2.598 in (1)
-
3.0 in (2)
-
3.15 in (2)
-
3.938 in (2)
-
4.0 in (2)
-
4.921 in (1)
до
Reach
Reach
-
1.969 in (9)
-
2.0 in (6)
-
2.48 in (1)
до
Reach
Reach
-
50.0 mm (9)
-
50.801 mm (6)
-
63.0 mm (1)
до
Number of Flutes
Number of Flutes
-
4 (4)
-
5 (4)
-
6 (3)
-
7 (2)
-
8 (3)
Over All Length [L]
Over All Length [L]
-
1.969 in (9)
-
2.0 in (6)
-
2.48 in (1)
до
Over All Length [L]
Over All Length [L]
-
50.0 mm (9)
-
50.801 mm (6)
-
63.0 mm (1)
до
application
Grade Of Cutting Tool
Grade Of Cutting Tool
-
WK15CM (16)
-
WN25PM (16)
-
WP20CM (16)
-
WP25PM (16)
-
WP35CM (16)
-
WP40PM (16)
-
WS30PM (16)
-
WS40PM (16)
-
WU35PM (16)
Maximum Ramp Angle
Maximum Ramp Angle
-
0.17 (2)
-
0.21 (1)
-
0.26 (2)
-
0.32 (2)
-
0.33 (1)
-
0.35 (1)
-
0.38 (1)
-
0.39 (1)
-
0.4 (2)
-
0.42 (1)
-
0.49 (1)
-
0.52 (1)
до
backEnd
Back-End Diameter
Back-End Diameter
-
19.05 mm (1)
-
22.0 mm (4)
-
25.401 mm (3)
-
27.0 mm (3)
-
32.0 mm (2)
-
38.125 mm (2)
-
40.0 mm (1)
до
Back-End Diameter
Back-End Diameter
-
0.75 in (1)
-
0.866 in (4)
-
1.0 in (3)
-
1.063 in (3)
-
1.26 in (2)
-
1.502 in (2)
-
1.575 in (1)
до
No filters matching ""
