Country

Language

Unit of Measure

Цена по прейскуранту:

Скидка: %

Цена по прейскуранту:

$486.82 /каждый

Ваша цена::

Кол-во

Фрезы M370 • Цилиндрический хвостовик WO08..

Name: Фрезы M370 • Цилиндрический хвостовик WO08..
SKU: 5352394
Rating: 0 (0 reviews)

Корпуса фрез M370 • WO08..

Метрическая система

Дюймовая система

SAP Material Number	5352394
ISO Catalog Number	M370D150Z02C125WO12L600
ANSI Catalog Number	M370D150Z02C125WO12L600
[D1MAX] Maximum Cutting Diameter	38.1 mm
[D1MAX] Maximum Cutting Diameter	1.5 in
[D1] Effective Cutting Diameter	21.27 mm
[D1] Effective Cutting Diameter	.837 in
[D] Adapter / Shank / Bore Diameter	31.7 mm
[D] Adapter / Shank / Bore Diameter	1.25 in
[L] Overall Length	152.4 mm
[L] Overall Length	6 in
[LBX] Body Length Maximum	42.93 mm
[LBX] Body Length Maximum	1.69 in
[AP1MAX] 1st Maximum Cutting Depth	2 mm
[AP1MAX] 1st Maximum Cutting Depth	.078 in
Number of Inserts	2
Maximum Ramping Angle	6.4
Max RPM	22380
Coolant Supply	Y
Weight Kilograms	0.87
Weight Pounds	1.92

Посмотреть все варианты продукции

Использование и область применения

Face Milling
Helical Milling
Plunge Milling
Ramping: Blank
Slotting: Square End
3D Profiling
Shank - Cylindrical Plain
Milling - Through Coolant
Side Milling/Shoulder Milling: Roughing
Pocketing

Обрабатываемый материал

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

Характеристики и преимущества

Двусторонняя пластина с шестью режущими кромками.

Максимальный удельный съем металла.

Рекомендуется для операций черновой обработки.

Со стороны станка

загрузка...

Со стороны заготовки

загрузка...

Insert Selection Guide

	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	...MM	WU35PM	...MM	WP40PM	...MM	WP40PM
P3–P4	...MM	WP25PM	...MM	WP25PM	...MH	WP40PM
P5–P6	...MM	WP25PM	...MM	WP35CM	...MH	WP35CM
M1–M2	...MM	WS30PM	...MM	WU35PM	...MM	WP40PM
M3	...MM	WP25PM	...MM	WP35CM	...MM	WP40PM
K1–K2	...MH	WK15CM	...MH	WK15CM	...MH	WP20CM
K3	...MH	WK15CM	...MH	WK15CM	...MH	WP20CM
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	...MM	WS30PM	...MM	WU35PM	...MM	WP40PM
S3	...MM	WS30PM	...MM	WU35PM	...MM	WP40PM
S4	...MM	WS30PM	...MM	WU35PM	...MM	WP40PM
H1	...MH	WP35CM	...MR	WP25PM	–	–

Recommended Starting Feeds [IPT]

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
...MM	.035	.073	.143	.026	.052	.099	.019	.039	.073	.017	.034	.063	.015	.031	.058	...MM
...MH	.035	.093	.196	.026	.066	.134	.019	.049	.098	.017	.042	.085	.015	.039	.077	...MH
...MR	.035	.111	.214	.026	.078	.145	.019	.057	.106	.017	.050	.092	.015	.046	.084	...MR

Light Machining

General Purpose

Heavy Machining

Рекомендуемые начальные значения скоростей резания [м/мин]

Material Group		TN6525			TN6540			WK15CM			WP25PM			WP35CM
P	1	410	320	280	360	280	240	–	–	–	395	340	325	455	395	370
	2	320	250	215	250	190	170	–	–	–	330	290	240	280	255	230
	3	280	215	185	215	170	140	–	–	–	305	260	210	255	230	205
	4	235	170	145	180	130	110	–	–	–	270	220	180	190	175	160
	5	310	235	200	240	180	150	–	–	–	220	205	180	260	230	210
	6	205	160	130	160	120	100	–	–	–	200	150	120	160	135	110
M	1	190	120	80	130	80	60	–	–	–	245	215	200	205	185	155
	2	120	80	50	80	50	40	–	–	–	220	190	155	185	160	140
	3	125	80	55	85	50	40	–	–	–	170	145	115	145	130	115
K	1	275	245	220	220	205	180	505	460	410	275	245	220	295	265	240
	2	215	190	180	175	155	140	400	355	330	215	190	180	235	210	190
	3	180	160	145	155	145	125	335	300	275	180	160	145	195	175	160
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	50	35	30	–	–	–	50	40	30	–	–	–
	2	–	–	–	25	20	10	–	–	–	50	40	30	–	–	–
	3	–	–	–	70	40	30	–	–	–	60	50	30	–	–	–
	4	–	–	–	60	30	25	–	–	–	85	60	40	66	50	33
H	1	–	–	–	–	–	–	–	–	–	145	110	85	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Material Group		WP40PM			WS30PM			WS40PM			WU35PM
P	1	355	310	295	–	–	–	–	–	–	260	230	215
	2	300	260	215	–	–	–	–	–	–	220	190	160
	3	275	235	190	–	–	–	–	–	–	200	170	140
	4	245	205	160	–	–	–	–	–	–	180	150	120
	5	205	185	160	–	–	–	440	325	230	150	135	120
	6	180	140	110	–	–	–	375	260	165	130	100	80
M	1	235	205	185	270	240	220	850	605	375	170	150	135
	2	210	180	150	245	215	175	755	560	345	155	130	110
	3	155	140	110	185	160	125	625	440	280	115	100	80
K	1	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–
S	1	50	40	35	55	50	35	200	145	90	35	30	25
	2	50	40	35	55	50	35	180	130	85	35	30	25
	3	60	50	35	65	55	35	210	150	95	45	35	25
	4	80	60	40	100	70	50	295	215	135	60	45	30
H	1	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]

Material Group		TN6525			TN6540			WK15CM			WP25PM			WP35CM			WP40PM			WS30PM			WS40PM			WU35PM
P	1	1340	1045	925	1180	925	785	–	–	–	1295	1120	1060	1790	1555	1460	1165	1025	965	–	–	–	–	–	–	850	750	705
	2	1045	830	710	830	630	550	–	–	–	1080	940	785	1105	1000	905	985	845	710	–	–	–	–	–	–	720	620	520
	3	925	710	610	710	550	450	–	–	–	1000	845	690	1000	905	805	905	770	630	–	–	–	–	–	–	655	555	455
	4	770	550	475	590	430	355	–	–	–	890	725	590	750	690	630	805	670	535	–	–	–	–	–	–	590	490	390
	5	1025	770	650	785	590	490	–	–	–	725	670	590	1025	905	830	670	610	535	–	–	–	560	475	395	490	440	390
	6	670	535	430	535	395	335	–	–	–	650	490	395	630	535	430	590	450	355	–	–	–	490	360	260	425	325	260
M	1	630	395	260	430	260	200	–	–	–	805	710	650	805	725	610	770	670	610	890	785	725	690	560	460	555	490	440
	2	395	260	155	260	155	140	–	–	–	725	630	510	725	630	550	690	590	490	805	710	570	590	475	395	505	425	360
	3	415	260	180	275	155	140	–	–	–	550	475	370	570	510	450	510	450	355	610	535	415	475	360	280	375	325	260
K	1	905	805	725	725	670	590	1655	1520	1340	905	805	725	1165	1045	940	–	–	–	–	–	–	–	–	–	–	–	–
	2	710	630	590	570	510	450	1320	1165	1080	710	630	590	925	830	750	–	–	–	–	–	–	–	–	–	–	–	–
	3	590	535	475	510	475	415	1105	985	905	590	535	475	770	690	630	–	–	–	–	–	–	–	–	–	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	155	120	95	–	–	–	155	140	95	–	–	–	155	140	120	180	155	120	130	115	80	110	95	80
	2	–	–	–	80	60	40	–	–	–	155	140	95	–	–	–	155	140	120	180	155	120	130	115	80	110	95	80
	3	–	–	–	235	140	95	–	–	–	200	155	95	–	–	–	200	155	120	215	180	120	165	130	80	145	110	80
	4	–	–	–	200	95	80	–	–	–	275	200	140	260	200	130	260	200	140	335	235	155	195	165	100	195	145	95
H	1	–	–	–	–	–	–	–	–	–	475	355	275	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Комплектующие for Фрезы M370 • Цилиндрический хвостовик WO08..

Ключ Тоrx D15

Цена по прейскуранту:

Скидка: %

Ваша цена::

Кол-во

Винт

Цена по прейскуранту:

Скидка: %

Ваша цена::

Кол-во

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	Номер по каталогу ISO	Сплав

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
..MM	0,90	1,87	3,62	0,65	1,33	2,52	0,48	0,99	1,86	0,42	0,86	1,61	0,39	0,79	1,47	..MM
..MH	0,90	2,35	4,97	0,65	1,67	3,40	0,48	1,23	2,48	0,42	1,07	2,15	0,39	0,98	1,96	..MH
..MR	0,90	2,81	5,44	0,65	1,97	3,69	0,48	1,46	2,69	0,42	1,27	2,33	0,39	1,16	2,13	..MR

Welcome

Please confirm your preferences

Update Preferences

Предложения по продукции

Product Family suggestions

Send a Message

Send a Message

Editing Solution

Adding Solution