Welcome
Please confirm your preferences
Update Preferences

Предложения по продукции

Product Family suggestions

WIDIA At Your Service

Have a Product Specific Question?

See a full list of Global Service Professionals by expertise area

Quick Order
Позиции успешно добавлено в корзину
View Cart
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

Способ крепления P

Выбрать фильтры
Filters
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (24)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (24)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (24)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (24)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (24)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (24)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (24)
  • M Stainless Steel (24)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (24)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (24)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (24)
  • K Cast Iron (24)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (24)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (24)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (24)
  • N Non-Ferrous Materials (24)
    • N1
      Wrought Aluminum
      (24)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (24)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (24)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (24)
    • N6
      Carbon, Graphite Composites, CFRP
      (22)
    • N7
      MMC's
      (24)
  • S High-Temp Alloys (24)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (24)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (24)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (24)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (24)
  • H Hardened Materials (22)
    • H1
      Hardened Materials 44-48 HRC
      (22)
    • H2
      Hardened Materials 48-55 HRC
      (22)
    • H3
      Hardened Materials 56-60 HRC
      (22)
    • H4
      Hardened Materials >60 HRC
      (22)
Applications
Applications
  • Facing Facing (16)
  • ID Facing ID Facing (16)
  • Multiple Direction Cutting Multiple Direction Cutting (16)
  • Profiling Profiling (16)
  • TRN Boring TRN Boring (24)
  • Turning Turning (24)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (24)
  • Interrupted (22)
  • Lightly Interrupted Cut (24)
  • Smooth Cut (24)
  • Varying Depth of Cut (24)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (8)
  • 95.0 (16)
Tool Cutting Edge Angle Min до Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (22)
  • 2.0 (16)
  • 3.0 (8)
  • 4.0 (16)
  • 6.0 (8)
  • 8.0 (8)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (24)
  • 0.008 in (18)
  • 0.014 in (6)
  • 0.016 in (24)
  • 0.024 in (8)
  • 0.031 in (24)
  • 0.047 in (24)
  • 0.062 in (8)
  • 0.063 in (22)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (24)
  • 0.2 mm (18)
  • 0.351 mm (6)
  • 0.4 mm (24)
  • 0.601 mm (8)
  • 0.8 mm (24)
  • 1.201 mm (24)
  • 1.576 mm (8)
  • 1.6 mm (22)
Corner Radius Min до Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (14)
  • 241 (8)
  • CL4 (14)
  • CM2 (14)
  • CM3 (14)
  • CM4 (8)
  • CPX (14)
  • CW2 (14)
  • CW2015 (14)
  • CW5025 (22)
  • GX (8)
  • HK1500 (22)
  • HT2 (16)
  • HTX (8)
  • K060 (8)
  • K090 (14)
  • K1 (8)
  • K10M (22)
  • K10P (22)
  • K10U (22)
  • K15U (22)
  • K20K (22)
  • K21 (8)
  • K25M (24)
  • K25P (22)
  • K313 (24)
  • K35P (14)
  • K420 (8)
  • K45 (8)
  • K68 (14)
  • KB1340 (10)
  • KB1345 (8)
  • KB1610 (16)
  • KB1625 (8)
  • KB1630 (8)
  • KB5610 (16)
  • KB5625 (8)
  • KB5630 (8)
  • KB9610 (22)
  • KB9640 (18)
  • KBH10 (22)
  • KBH10B (14)
  • KBH20 (22)
  • KBH20B (14)
  • KBK35 (8)
  • KC210 (14)
  • KC250 (8)
  • KC5010 (24)
  • KC5025 (24)
  • KC5410 (22)
  • KC5510 (24)
  • KC5525 (24)
  • KC710 (8)
  • KC720 (16)
  • KC722 (8)
  • KC730 (18)
  • KC7310 (24)
  • KC732 (16)
  • KC8050 (24)
  • KC810 (24)
  • KC850 (24)
  • KC9010 (24)
  • KC9025 (24)
  • KC910 (22)
  • KC9105 (24)
  • KC9110 (24)
  • KC9120 (24)
  • KC9125 (24)
  • KC9140 (24)
  • KC9145 (22)
  • KC9210 (6)
  • KC9215 (24)
  • KC9225 (24)
  • KC9240 (24)
  • KC9240NEW (24)
  • KC9245 (24)
  • KC9315 (24)
  • KC9320 (24)
  • KC9325 (24)
  • KC935 (24)
  • KC950 (22)
  • KC990 (24)
  • KCK05 (24)
  • KCK05B (24)
  • KCK15 (24)
  • KCK15B (24)
  • KCK20 (24)
  • KCK20B (24)
  • KCM15 (24)
  • KCM15B (24)
  • KCM25 (24)
  • KCM25B (24)
  • KCM35 (22)
  • KCM35B (22)
  • KCP05 (24)
  • KCP05B (24)
  • KCP10 (24)
  • KCP10B (24)
  • KCP25 (24)
  • KCP25B (24)
  • KCP25C (24)
  • KCP30 (24)
  • KCP30B (22)
  • KCP40 (22)
  • KCP40B (22)
  • KCPK05 (24)
  • KCS10 (8)
  • KCS10B (24)
  • KCU10 (24)
  • KCU10B (24)
  • KCU25 (24)
  • KD050 (8)
  • KD081 (8)
  • KD100 (8)
  • KD120 (8)
  • KD1400 (16)
  • KD1405 (8)
  • KD1425 (16)
  • KM1 (8)
  • KMF (8)
  • KS15 (8)
  • KT1120 (8)
  • KT125 (14)
  • KT150 (8)
  • KT175 (14)
  • KT315 (24)
  • KT325 (16)
  • KU10T (24)
  • KU30T (24)
  • KY1310 (16)
  • KY1320 (22)
  • KY1540 (8)
  • KY1615 (14)
  • KY2000 (8)
  • KY2100 (8)
  • KY3000 (14)
  • KY3400 (16)
  • KY3500 (22)
  • KY4000 (8)
  • KY4300 (8)
  • KY4400 (22)
  • KYHK15B (22)
  • KYK10 (16)
  • KYK25 (16)
  • KYK35 (22)
  • KYS25 (8)
  • KYS30 (16)
  • NL200 (14)
  • NL250 (24)
  • NL300 (14)
  • NL400 (16)
  • NL920 (24)
  • P25 (8)
  • PB100 (8)
  • PB170 (8)
  • PB250 (8)
  • PB300 (8)
  • PS5 (16)
  • SP0819 (22)
  • SP3019 (16)
  • SP4019 (16)
  • THM (8)
  • THM-X (14)
  • THMF-X (8)
  • TN10P (24)
  • TN10U (22)
  • TN15M (22)
  • TN15U (22)
  • TN2000 (22)
  • TN20K (22)
  • TN20P (24)
  • TN30M (24)
  • TN30P (22)
  • TN4000 (22)
  • TN5015 (24)
  • TN5020 (24)
  • TN5105 (24)
  • TN5120 (24)
  • TN6010 (14)
  • TN6025 (22)
  • TN7005 (24)
  • TN7010 (24)
  • TN7015 (24)
  • TN7025 (24)
  • TN7035 (22)
  • TN7105 (24)
  • TN7110 (24)
  • TN7115 (24)
  • TN7125 (24)
  • TN7135 (22)
  • TN8025 (24)
  • TTI15 (16)
  • TTR (8)
  • TTS (14)
  • TTX (14)
  • WBH10C (22)
  • WBH10P (8)
  • WBH10U (16)
  • WBH20P (22)
  • WBH25P (8)
  • WBH25U (14)
  • WBH30P (8)
  • WBK40U (10)
  • WBK45U (14)
  • WDN00U (8)
  • WDN25U (16)
  • WK05CT (24)
  • WK15CT (22)
  • WK20CT (24)
  • WM15CT (24)
  • WM25CT (24)
  • WM35CT (24)
  • WP05CT (16)
  • WP15CT (24)
  • WP20TT (2)
  • WP25CT (24)
  • WP35CT (24)
  • WS10PT (24)
  • WS25PT (24)
  • WU10HT (24)
  • WU10PT (24)
  • WU25PT (24)
  • X00511 (8)
  • X00580 (8)
  • X00581 (8)
  • X00582 (8)
  • X00583 (8)
  • X00584 (8)
  • X00585 (8)
  • X00586 (8)
  • X00591 (8)
  • X00592 (8)
  • X00593 (8)
  • X00594 (8)
  • X00596 (8)
  • X00597 (8)
  • X00599 (8)
Hand Of Tool
Hand Of Tool
  • L (12)
  • R (12)
Wiper Insert
Wiper Insert
  • N (24)
  • Y (24)
F Dimension
F Dimension
  • 17.0 mm (6)
  • 22.0 mm (6)
  • 27.0 mm (6)
  • 35.0 mm (6)
F Dimension Min до F Dimension Max
F Dimension
F Dimension
  • 0.669 in (6)
  • 0.866 in (6)
  • 1.063 in (6)
  • 1.379 in (6)
F Dimension Min до F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (6)
  • 40.0 mm (6)
  • 50.0 mm (6)
  • 63.0 mm (6)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (6)
  • 1.575 in (6)
  • 1.969 in (6)
  • 2.48 in (6)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (16)
  • E (8)
Maximum Bore Depth
Maximum Bore Depth
  • 3.477 in (6)
  • 4.42 in (6)
  • 4.485 in (3)
  • 4.49 in (3)
  • 5.671 in (6)
Maximum Bore Depth Min до Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 88.325 mm (6)
  • 112.275 mm (6)
  • 113.926 mm (3)
  • 114.051 mm (3)
  • 144.05 mm (6)
Maximum Bore Depth Min до Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (8)
  • D-DIAMOND/RHOMBIC 55 (8)
  • W-TRIGON 80 (8)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (24)
  • B L (22)
  • C A (22)
  • C N (22)
  • D P (22)
  • H T (24)
  • H W (24)
No filters matching ""
Показать ассортимент в
Метрическая система
Дюймовая система

ОРИГИНАЛЬНЫЙ ПРОДУКТ

PDUN 93° PDUN 93°

(8 Products)
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Shank: KM4X™Shank: KM4X™
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
Посмотреть ассортимент
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
5589482 KM4X63S25KPDUNL11 KM4X63S25KPDUNL11 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 DN..110408/DN..332 1.11 2.45
    Цена по прейскуранту:
    $623.96 /каждый
    Ваша цена::
    5589483 KM4X63S25KPDUNR11 KM4X63S25KPDUNR11 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 DN..110408/DN..332 1.11 2.45
      Цена по прейскуранту:
      $623.96 /каждый
      Ваша цена::
      5589465 KM4X63S32LPDUNR15 KM4X63S32LPDUNR15 32.0000 1.260 40.0000 1.575 22.0000 .8660 112.2700 4.420 140.0000 5.512 DN..150608/DN..442 1.35 2.97
        Цена по прейскуранту:
        $623.96 /каждый
        Ваша цена::
        5589477 KM4X63S40LPDUNR15 KM4X63S40LPDUNR15 40.0000 1.575 50.0000 1.969 27.0000 1.063 113.9200 4.485 140.0000 5.512 DN..150608/DN..442 1.70 3.75
          Цена по прейскуранту:
          $623.96 /каждый
          Ваша цена::
          5589470 KM4X63S50PPDUNL15 KM4X63S50PPDUNL15 50.0000 1.969 63.0000 2.480 35.0000 1.378 144.0500 5.671 170.0000 6.693 DN..150608/DN..442 2.71 5.97
            Цена по прейскуранту:
            $623.96 /каждый
            Ваша цена::
            5589471 KM4X63S50PPDUNR15 KM4X63S50PPDUNR15 50.0000 1.969 63.0000 2.480 35.0000 1.378 144.0500 5.671 170.0000 6.693 DN..150608/DN..442 2.71 5.96
              Цена по прейскуранту:
              $623.96 /каждый
              Ваша цена::
              Цена по прейскуранту:
              Скидка: %
              Ваша цена::
              Замена Данный товар недоступен
              Продукция для замены Данный товар можно приобрести у дистрибьютора

              ОРИГИНАЛЬНЫЙ ПРОДУКТ

              PWLN 95° PWLN 95°

              (8 Products)
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              • Shank: KM4X™Shank: KM4X™
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              Посмотреть ассортимент
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
              5589484 KM4X63S25KPWLNL08 KM4X63S25KPWLNL08 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 WN..080408/WN..432 1.11 2.45
                Цена по прейскуранту:
                $623.96 /каждый
                Ваша цена::
                5589485 KM4X63S25KPWLNR08 KM4X63S25KPWLNR08 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 WN..080408/WN..432 1.11 2.45
                  Цена по прейскуранту:
                  $623.96 /каждый
                  Ваша цена::
                  5589467 KM4X63S32LPWLNR08 KM4X63S32LPWLNR08 32.0000 1.260 40.0000 1.575 22.0000 .8660 112.2700 4.420 140.0000 5.512 WN..080408/WN..432 1.34 2.95
                    Цена по прейскуранту:
                    $623.96 /каждый
                    Ваша цена::
                    5589478 KM4X63S40LPWLNL08 KM4X63S40LPWLNL08 40.0000 1.575 50.0000 1.969 27.0000 1.063 113.9200 4.485 140.0000 5.512 WN..080408/WN..432 1.69 3.74
                      Цена по прейскуранту:
                      $623.96 /каждый
                      Ваша цена::
                      5589472 KM4X63S50PPWLNL08 KM4X63S50PPWLNL08 50.0000 1.969 63.0000 2.480 35.0000 1.378 144.0500 5.671 170.0000 6.693 WN..080408/WN..432 2.64 5.81
                        Цена по прейскуранту:
                        $623.96 /каждый
                        Ваша цена::
                        5589473 KM4X63S50PPWLNR08 KM4X63S50PPWLNR08 50.0000 1.969 63.0000 2.480 35.0000 1.378 144.0500 5.671 170.0000 6.693 WN..080408/WN..432 2.63 5.81
                          Цена по прейскуранту:
                          $623.96 /каждый
                          Ваша цена::
                          Цена по прейскуранту:
                          Скидка: %
                          Ваша цена::
                          Замена Данный товар недоступен
                          Продукция для замены Данный товар можно приобрести у дистрибьютора

                          ОРИГИНАЛЬНЫЙ ПРОДУКТ

                          PCLN 95° PCLN 95°

                          (8 Products)
                          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                          • Shank: KM4X™Shank: KM4X™
                          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                          Посмотреть ассортимент
                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                          5589480 KM4X63S25KPCLNL12 KM4X63S25KPCLNL12 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 CN..120408/CN..432 1.11 2.44
                            Цена по прейскуранту:
                            $623.96 /каждый
                            Ваша цена::
                            5589481 KM4X63S25KPCLNR12 KM4X63S25KPCLNR12 25.0000 .9840 32.0000 1.260 17.0000 .6690 88.3300 3.477 125.0000 4.921 CN..120408/CN..432 1.11 2.45
                              Цена по прейскуранту:
                              $623.96 /каждый
                              Ваша цена::
                              5589463 KM4X63S32LPCLNR12 KM4X63S32LPCLNR12 32.0000 1.260 40.0000 1.575 22.0000 .8660 112.2700 4.420 140.0000 5.512 CN..120408/CN..432 1.36 3.00
                                Цена по прейскуранту:
                                $623.96 /каждый
                                Ваша цена::
                                5589474 KM4X63S40LPCLNL12 KM4X63S40LPCLNL12 40.0000 1.575 50.0000 1.969 27.0000 1.063 114.0500 4.490 140.0000 5.512 CN..120408/CN..432 1.72 3.79
                                  Цена по прейскуранту:
                                  $623.96 /каждый
                                  Ваша цена::
                                  5589475 KM4X63S40LPCLNR12 KM4X63S40LPCLNR12 40.0000 1.575 50.0000 1.969 27.0000 1.063 114.0500 4.490 140.0000 5.512 CN..120408/CN..432 1.72 3.79
                                    Цена по прейскуранту:
                                    $623.96 /каждый
                                    Ваша цена::
                                    5589468 KM4X63S50PPCLNL12 KM4X63S50PPCLNL12 50.0000 1.969 63.0000 2.480 35.0000 1.378 144.0500 5.671 170.0000 6.693 CN..120408/CN..432 2.68 5.91
                                      Цена по прейскуранту:
                                      $623.96 /каждый
                                      Ваша цена::
                                      Цена по прейскуранту:
                                      Скидка: %
                                      Ваша цена::
                                      Замена Данный товар недоступен
                                      Продукция для замены Данный товар можно приобрести у дистрибьютора
                                      product-image
                                      Please adjust the following properties from

                                      Номер по каталогу ISO

                                      Номер по каталогу ANSI

                                      to find similar products.

                                      Найдены следующие чертежи САПР

                                      Выберите файлы, которые вы ищете, и загрузите их одновременно

                                      Не можете найти нужный тип файла?

                                      Вы собираетесь создать дубликат . Хотите продолжить?
                                      Вы собираетесь удалить Хотите продолжить?
                                      Как вы хотите переименовать ?
                                      Введите действительное имя
                                      Введите имя дубликата
                                      Введите действительное имя
                                      Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
                                      Введите действительное имя
                                      Отправить копию

                                      Введите действительный адрес электронной почты
                                      Введите действительное имя

                                      Найдены следующие чертежи САПР

                                      Выберите файлы, которые вы ищете, и загрузите их одновременно

                                      Не можете найти нужный тип файла?
                                      Запросить чертежи »

                                      Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
                                      Session expired due to inactivity, please login again
                                      Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
                                      товар(-ы) успешно добавлен(-ы) в корзину
                                      Показать корзину
                                      DOWNLOAD TYPE:



                                      . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                      Minimum quantity should be

                                      SAP Material Number Номер по каталогу ISO Сплав    
                                      Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                                      You are about to leave the Solution building process.

                                      Are you sure you want to leave?