Welcome
Please confirm your preferences
Update Preferences

Предложения по продукции

Product Family suggestions

WIDIA At Your Service

Have a Product Specific Question?

See a full list of Global Service Professionals by expertise area

Quick Order
Позиции успешно добавлено в корзину
View Cart
Back to Solution

Editing Solution

Adding Solution

Solution Name: {{SolutionName}}

Способ крепления D

Выбрать фильтры
Filters
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (7)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (7)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (7)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (7)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (7)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7)
  • M Stainless Steel (7)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (7)
  • K Cast Iron (7)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (7)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (7)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
  • N Non-Ferrous Materials (7)
    • N1
      Wrought Aluminum
      (7)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (7)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (3)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (7)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (7)
    • N6
      Carbon, Graphite Composites, CFRP
      (5)
    • N7
      MMC's
      (7)
  • S High-Temp Alloys (7)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7)
  • H Hardened Materials (5)
    • H1
      Hardened Materials 44-48 HRC
      (5)
    • H2
      Hardened Materials 48-55 HRC
      (5)
    • H3
      Hardened Materials 56-60 HRC
      (5)
    • H4
      Hardened Materials >60 HRC
      (5)
Applications
Applications
  • Facing Facing (7)
  • ID Facing ID Facing (7)
  • Multiple Direction Cutting Multiple Direction Cutting (7)
  • TRN Boring TRN Boring (7)
  • Turning Turning (7)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (7)
  • Interrupted (5)
  • Lightly Interrupted Cut (7)
  • Smooth Cut (7)
  • Varying Depth of Cut (7)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (4)
  • 95.0 (3)
Tool Cutting Edge Angle Min до Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (5)
  • 2.0 (6)
  • 3.0 (1)
  • 4.0 (6)
  • 6.0 (1)
  • 8.0 (2)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (7)
  • 0.008 in (5)
  • 0.014 in (2)
  • 0.016 in (7)
  • 0.024 in (1)
  • 0.031 in (7)
  • 0.047 in (7)
  • 0.062 in (2)
  • 0.063 in (5)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (7)
  • 0.2 mm (5)
  • 0.351 mm (2)
  • 0.4 mm (7)
  • 0.601 mm (1)
  • 0.8 mm (7)
  • 1.201 mm (7)
  • 1.576 mm (2)
  • 1.6 mm (5)
Corner Radius Min до Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (4)
  • 241 (2)
  • CL4 (4)
  • CM2 (4)
  • CM3 (4)
  • CM4 (2)
  • CPX (4)
  • CW2 (4)
  • CW2015 (4)
  • CW5025 (5)
  • GX (2)
  • HK1500 (5)
  • HT2 (6)
  • HTX (2)
  • K060 (2)
  • K090 (4)
  • K1 (2)
  • K10M (5)
  • K10P (5)
  • K10U (5)
  • K15U (5)
  • K20K (5)
  • K21 (2)
  • K25M (7)
  • K25P (5)
  • K313 (7)
  • K35P (3)
  • K420 (2)
  • K45 (2)
  • K68 (4)
  • KB1340 (4)
  • KB1345 (2)
  • KB1610 (3)
  • KB1625 (2)
  • KB1630 (2)
  • KB5610 (3)
  • KB5625 (2)
  • KB5630 (2)
  • KB9610 (5)
  • KB9640 (5)
  • KBH10 (5)
  • KBH10B (4)
  • KBH20 (5)
  • KBH20B (4)
  • KBK35 (2)
  • KC210 (4)
  • KC250 (2)
  • KC5010 (7)
  • KC5025 (7)
  • KC5410 (5)
  • KC5510 (7)
  • KC5525 (7)
  • KC710 (2)
  • KC720 (3)
  • KC722 (2)
  • KC725M (2)
  • KC730 (5)
  • KC7310 (7)
  • KC732 (3)
  • KC8050 (7)
  • KC810 (7)
  • KC850 (7)
  • KC9010 (7)
  • KC9025 (7)
  • KC910 (5)
  • KC9105 (7)
  • KC9110 (7)
  • KC9120 (7)
  • KC9125 (7)
  • KC9140 (7)
  • KC9145 (5)
  • KC9210 (2)
  • KC9215 (7)
  • KC9225 (7)
  • KC9240 (7)
  • KC9240NEW (7)
  • KC9245 (7)
  • KC9315 (7)
  • KC9320 (7)
  • KC9325 (7)
  • KC935 (7)
  • KC950 (5)
  • KC990 (7)
  • KCK05 (7)
  • KCK05B (7)
  • KCK15 (7)
  • KCK15B (7)
  • KCK20 (7)
  • KCK20B (7)
  • KCM15 (7)
  • KCM15B (7)
  • KCM25 (7)
  • KCM25B (7)
  • KCM35 (5)
  • KCM35B (5)
  • KCP05 (7)
  • KCP05B (7)
  • KCP10 (7)
  • KCP10B (7)
  • KCP25 (7)
  • KCP25B (7)
  • KCP25C (7)
  • KCP30 (7)
  • KCP30B (5)
  • KCP40 (5)
  • KCP40B (5)
  • KCPK05 (7)
  • KCS10 (2)
  • KCS10B (7)
  • KCU10 (7)
  • KCU25 (7)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD120 (2)
  • KD1400 (3)
  • KD1405 (2)
  • KD1425 (3)
  • KM1 (2)
  • KMF (2)
  • KS15 (2)
  • KT1120 (2)
  • KT125 (4)
  • KT150 (2)
  • KT175 (4)
  • KT315 (7)
  • KT325 (6)
  • KU10T (7)
  • KU30T (7)
  • KY1310 (3)
  • KY1320 (5)
  • KY1540 (2)
  • KY1615 (4)
  • KY2000 (2)
  • KY2100 (2)
  • KY3000 (4)
  • KY3400 (3)
  • KY3500 (5)
  • KY4000 (2)
  • KY4300 (2)
  • KY4400 (5)
  • KYHK15B (5)
  • KYK10 (3)
  • KYK25 (3)
  • KYK35 (5)
  • KYS25 (2)
  • KYS30 (3)
  • NL200 (4)
  • NL250 (7)
  • NL300 (4)
  • NL400 (3)
  • NL920 (7)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (6)
  • SP0819 (5)
  • SP3019 (5)
  • SP4019 (3)
  • THM (2)
  • THM-X (4)
  • THMF-X (2)
  • TN10P (7)
  • TN10U (5)
  • TN15M (5)
  • TN15U (5)
  • TN2000 (5)
  • TN20K (5)
  • TN20P (7)
  • TN30M (7)
  • TN30P (5)
  • TN4000 (5)
  • TN5015 (7)
  • TN5020 (7)
  • TN5105 (7)
  • TN5120 (7)
  • TN6010 (4)
  • TN6025 (5)
  • TN7005 (7)
  • TN7010 (7)
  • TN7015 (7)
  • TN7025 (7)
  • TN7035 (5)
  • TN7105 (7)
  • TN7110 (7)
  • TN7115 (7)
  • TN7125 (7)
  • TN7135 (5)
  • TN8025 (7)
  • TTI15 (6)
  • TTR (2)
  • TTS (4)
  • TTX (4)
  • WBH10C (5)
  • WBH10P (2)
  • WBH10U (3)
  • WBH20P (5)
  • WBH25P (2)
  • WBH25U (4)
  • WBH30P (2)
  • WBK40U (4)
  • WBK45U (4)
  • WDN00U (2)
  • WDN25U (3)
  • WK05CT (7)
  • WK15CT (5)
  • WK20CT (7)
  • WM15CT (7)
  • WM25CT (7)
  • WM35CT (7)
  • WP05CT (3)
  • WP15CT (7)
  • WP20TT (2)
  • WP25CT (7)
  • WP35CT (7)
  • WS10PT (7)
  • WS25PT (7)
  • WU10HT (7)
  • WU10PT (7)
  • WU25PT (7)
  • X00511 (2)
  • X00580 (2)
  • X00581 (2)
  • X00582 (2)
  • X00583 (2)
  • X00584 (2)
  • X00585 (2)
  • X00586 (2)
  • X00591 (2)
  • X00592 (2)
  • X00593 (2)
  • X00594 (2)
  • X00596 (2)
  • X00597 (2)
  • X00599 (2)
Hand Of Tool
Hand Of Tool
  • L (4)
  • R (3)
Wiper Insert
Wiper Insert
  • N (7)
  • Y (7)
F Dimension
F Dimension
  • 17.0 mm (5)
  • 27.0 mm (2)
F Dimension Min до F Dimension Max
F Dimension
F Dimension
  • 0.669 in (5)
  • 1.063 in (2)
F Dimension Min до F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (4)
  • 33.0 mm (1)
  • 50.0 mm (2)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (4)
  • 1.299 in (1)
  • 1.969 in (2)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (3)
  • E (4)
Maximum Bore Depth
Maximum Bore Depth
  • 2.598 in (5)
  • 4.646 in (2)
Maximum Bore Depth Min до Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 66.0 mm (5)
  • 118.0 mm (2)
Maximum Bore Depth Min до Maximum Bore Depth Max
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • D-DIAMOND/RHOMBIC 55 (4)
  • W-TRIGON 80 (1)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (7)
  • B L (5)
  • C A (5)
  • C N (5)
  • D P (5)
  • H T (7)
  • H W (7)
No filters matching ""
Показать ассортимент в
Метрическая система
Дюймовая система

ОРИГИНАЛЬНЫЙ ПРОДУКТ

DCLN 95° DCLN 95°

Режущие головки для внутренней обработки • способ крепления d
(2 Products)
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Shank - PSCShank - PSC
Посмотреть ассортимент
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6330408 PSC50S25GDCLNL12 PSC50S25GDCLNL12 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 0.80
    Цена по прейскуранту:
    $521.50 /каждый
    Ваша цена::
    6330410 PSC50S25GDCLNR12 PSC50S25GDCLNR12 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 0.80
      Цена по прейскуранту:
      $521.50 /каждый
      Ваша цена::
      Цена по прейскуранту:
      Скидка: %
      Ваша цена::
      Замена Данный товар недоступен
      Продукция для замены Данный товар можно приобрести у дистрибьютора

      ОРИГИНАЛЬНЫЙ ПРОДУКТ

      DDUN 93° DDUN 93°

      Режущие головки для внутренней обработки • способ крепления d
      (4 Products)
      • Shank - PSCShank - PSC
      • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
      • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
      • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
      Посмотреть ассортимент
      SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
      6330421 PSC50S25GDDUNL11 PSC50S25GDDUNL11 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 DN..110408/DN..332 0.95
        Цена по прейскуранту:
        $521.50 /каждый
        Ваша цена::
        6330423 PSC50S25GDDUNR11 PSC50S25GDDUNR11 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 32.0000 1.259 DN..110408/DN..332 0.95
          Цена по прейскуранту:
          $521.50 /каждый
          Ваша цена::
          6330422 PSC50S40LDDUNL15 PSC50S40LDDUNL15 40.0000 1.574 140.0000 5.511 118.0000 4.645 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.64
            Цена по прейскуранту:
            $521.50 /каждый
            Ваша цена::
            6330424 PSC50S40LDDUNR15 PSC50S40LDDUNR15 40.0000 1.574 140.0000 5.511 118.0000 4.645 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.64
              Цена по прейскуранту:
              $521.50 /каждый
              Ваша цена::
              Цена по прейскуранту:
              Скидка: %
              Ваша цена::
              Замена Данный товар недоступен
              Продукция для замены Данный товар можно приобрести у дистрибьютора

              ОРИГИНАЛЬНЫЙ ПРОДУКТ

              DWLN 95° DWLN 95°

              Режущие головки для внутренней обработки • способ крепления d
              (1 Products)
              • Shank - PSCShank - PSC
              • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
              • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
              • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
              Посмотреть ассортимент
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
              6330425 PSC50S25GDWLNL08 PSC50S25GDWLNL08 25.0000 .9843 90.0000 3.543 66.0000 2.598 17.0000 .6693 33.0000 1.299 WN..080408/WN..432 0.80
                Цена по прейскуранту:
                $521.50 /каждый
                Ваша цена::
                Цена по прейскуранту:
                Скидка: %
                Ваша цена::
                Замена Данный товар недоступен
                Продукция для замены Данный товар можно приобрести у дистрибьютора
                product-image
                Please adjust the following properties from

                Номер по каталогу ISO

                Номер по каталогу ANSI

                to find similar products.
                Вы собираетесь создать дубликат . Хотите продолжить?
                Вы собираетесь удалить Хотите продолжить?
                Как вы хотите переименовать ?
                Введите действительное имя
                Введите имя дубликата
                Введите действительное имя
                Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
                Введите действительное имя
                Отправить копию

                Введите действительный адрес электронной почты
                Введите действительное имя

                Найдены следующие чертежи САПР

                Выберите файлы, которые вы ищете, и загрузите их одновременно

                Не можете найти нужный тип файла?
                Запросить чертежи »

                Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
                Session expired due to inactivity, please login again
                Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
                товар(-ы) успешно добавлен(-ы) в корзину
                Показать корзину
                DOWNLOAD TYPE:



                . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                SAP Material Number Номер по каталогу ISO Сплав    
                Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                You are about to leave the Solution building process.

                Are you sure you want to leave?