Welcome
Please confirm your preferences
Update Preferences

Предложения по продукции

Product Family suggestions

WIDIA At Your Service

Customer Support

Find contact details to customer support centers around the globe.

Quick Order
Позиции успешно добавлено в корзину
View Cart

Державки

Выбрать фильтры
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (66)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (66)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (66)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (66)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (66)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (66)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (66)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (66)
  • M Stainless Steel (66)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (66)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (66)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (66)
  • K Cast Iron (66)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (66)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (66)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (66)
  • N Non-Ferrous Materials (66)
    • N1
      Wrought Aluminum (66)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (66)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (66)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (51)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (66)
    • N6
      Carbon, Graphite Composites, CFRP (66)
    • N7
      MMC's (51)
  • S High-Temp Alloys (66)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (66)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (66)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (66)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (66)
  • H Hardened Materials (21)
    • H1
      Hardened Materials 44-48 HRC (21)
    • H2
      Hardened Materials 48-55 HRC (21)
Select All Star
  • DE (3)
  • IN (1)
  • US (22)
Applications
Applications
  • Face Grooving Face Grooving (67)
  • Grooving Grooving (67)
  • OD Thread Turning OD Thread Turning (67)
  • Threading Threading (67)
Type of Thread
Type of Thread
  • 60 (64)
  • ACME (43)
  • API RD (28)
  • BSW (15)
  • BUTTRESS (13)
  • STUB ACME (28)
  • UN (58)
  • UNJ (15)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (64)
  • Lightly Interrupted Cut (64)
  • Smooth Cut (64)
  • Varying Depth of Cut (64)
Connection Style
Connection Style
  • Toolholder (47)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (64)
  • 2.0 (66)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 2.5 in (1)
  • 3.15 in (1)
  • 3.5 in (1)
  • 3.938 in (1)
  • 4.0 in (2)
  • 4.5 in (9)
  • 4.921 in (7)
  • 5.0 in (9)
  • 5.906 in (13)
  • 6.0 in (21)
  • 6.694 in (2)
Over All Length [L] Min до Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 63.5 mm (1)
  • 80.0 mm (1)
  • 88.9 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (2)
  • 114.301 mm (9)
  • 125.0 mm (7)
  • 127.0 mm (9)
  • 150.0 mm (13)
  • 152.4 mm (21)
  • 170.0 mm (2)
Over All Length [L] Min до Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.003 in (43)
  • 0.004 in (36)
  • 0.006 in (7)
  • 0.007 in (56)
  • 0.008 in (64)
  • 0.01 in (30)
  • 0.012 in (15)
  • 0.014 in (41)
  • 0.016 in (28)
  • 0.02 in (23)
  • 0.023 in (41)
  • 0.03 in (23)
  • 0.031 in (51)
  • 0.039 in (51)
  • 0.047 in (51)
  • 0.049 in (51)
  • 0.06 in (51)
  • 0.062 in (28)
  • 0.063 in (41)
  • 0.069 in (51)
  • 0.078 in (28)
  • 0.079 in (41)
  • 0.089 in (41)
  • 0.095 in (41)
  • 0.098 in (13)
  • 0.125 in (13)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.076 mm (43)
  • 0.1 mm (36)
  • 0.151 mm (7)
  • 0.176 mm (56)
  • 0.2 mm (64)
  • 0.225 mm (15)
  • 0.25 mm (30)
  • 0.301 mm (15)
  • 0.325 mm (41)
  • 0.351 mm (28)
  • 0.4 mm (28)
  • 0.5 mm (23)
  • 0.576 mm (41)
  • 0.75 mm (23)
  • 0.775 mm (51)
  • 1.0 mm (51)
  • 1.201 mm (51)
  • 1.25 mm (51)
  • 1.5 mm (51)
  • 1.576 mm (28)
  • 1.6 mm (41)
  • 1.75 mm (51)
  • 1.975 mm (28)
  • 2.0 mm (41)
  • 2.25 mm (41)
  • 2.401 mm (41)
  • 2.5 mm (13)
  • 3.176 mm (13)
Corner Radius Min до Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (51)
  • TN10P (42)
  • TN6010 (64)
  • TN6025 (66)
  • TN7110 (64)
  • WU10HT (15)
  • WU10PT (21)
  • WU25PT (13)
Hand Of Tool
Hand Of Tool
  • L (16)
  • R (31)
Wiper Insert
Wiper Insert
  • N (66)
F Dimension
F Dimension
  • 12.0 mm (1)
  • 12.701 mm (3)
  • 14.275 mm (1)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (1)
  • 20.0 mm (1)
  • 25.0 mm (3)
  • 25.401 mm (6)
  • 31.75 mm (13)
  • 32.0 mm (7)
  • 38.1 mm (4)
  • 40.0 mm (2)
F Dimension Min до F Dimension Max
F Dimension
F Dimension
  • 0.473 in (1)
  • 0.5 in (3)
  • 0.562 in (1)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (1)
  • 0.787 in (1)
  • 0.984 in (3)
  • 1.0 in (6)
  • 1.25 in (13)
  • 1.26 in (7)
  • 1.5 in (4)
  • 1.575 in (2)
F Dimension Min до F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (46)
  • 41.301 mm (23)
  • 47.6 mm (23)
  • 55.875 mm (1)
  • 57.2 mm (10)
  • 60.325 mm (1)
  • 63.5 mm (4)
  • 76.2 mm (1)
  • 88.9 mm (24)
  • 139.701 mm (23)
  • 174.601 mm (23)
  • 209.601 mm (10)
  • 222.3 mm (10)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (46)
  • 1.627 in (23)
  • 1.874 in (23)
  • 2.2 in (1)
  • 2.253 in (10)
  • 2.375 in (1)
  • 2.5 in (4)
  • 3.0 in (1)
  • 3.5 in (24)
  • 5.5 in (23)
  • 6.875 in (23)
  • 8.252 in (10)
  • 8.752 in (10)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (64)
Maximum Axial Groove Diameter Min до Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (64)
Maximum Axial Groove Diameter Min до Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (47)
Rake Angle Style
Rake Angle Style
  • NEUTRAL (ZERO) (47)
Maximum Bore Depth
Maximum Bore Depth
  • 1.0 in (7)
  • 2.0 in (13)
Maximum Bore Depth Min до Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 25.401 mm (7)
  • 50.801 mm (13)
Maximum Bore Depth Min до Maximum Bore Depth Max
frontEnd
Cutting Width
Cutting Width
  • 0.02 in (23)
  • 0.031 in (23)
  • 0.039 in (51)
  • 0.041 in (15)
  • 0.047 in (51)
  • 0.055 in (23)
  • 0.058 in (23)
  • 0.06 in (51)
  • 0.062 in (51)
  • 0.067 in (23)
  • 0.069 in (51)
  • 0.073 in (28)
  • 0.077 in (23)
  • 0.078 in (28)
  • 0.079 in (51)
  • 0.088 in (51)
  • 0.089 in (36)
  • 0.094 in (15)
  • 0.095 in (51)
  • 0.098 in (51)
  • 0.108 in (51)
  • 0.119 in (64)
  • 0.125 in (64)
  • 0.126 in (28)
  • 0.128 in (51)
  • 0.138 in (64)
  • 0.147 in (15)
  • 0.152 in (23)
  • 0.156 in (28)
  • 0.157 in (41)
  • 0.167 in (28)
  • 0.177 in (41)
  • 0.188 in (35)
  • 0.189 in (41)
  • 0.192 in (15)
  • 0.195 in (15)
  • 0.196 in (28)
  • 0.197 in (13)
  • 0.217 in (13)
  • 0.237 in (13)
  • 0.25 in (13)
Cutting Width Min до Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (23)
  • 0.775 mm (23)
  • 0.8 mm (23)
  • 1.0 mm (51)
  • 1.05 mm (15)
  • 1.201 mm (51)
  • 1.401 mm (23)
  • 1.475 mm (23)
  • 1.5 mm (51)
  • 1.576 mm (51)
  • 1.701 mm (23)
  • 1.75 mm (51)
  • 1.826 mm (28)
  • 1.951 mm (23)
  • 1.975 mm (28)
  • 2.0 mm (51)
  • 2.2 mm (51)
  • 2.225 mm (15)
  • 2.25 mm (36)
  • 2.375 mm (15)
  • 2.401 mm (51)
  • 2.5 mm (51)
  • 2.75 mm (51)
  • 3.0 mm (64)
  • 3.176 mm (64)
  • 3.2 mm (28)
  • 3.25 mm (51)
  • 3.5 mm (64)
  • 3.725 mm (15)
  • 3.85 mm (23)
  • 3.95 mm (28)
  • 3.975 mm (15)
  • 4.0 mm (41)
  • 4.25 mm (28)
  • 4.5 mm (41)
  • 4.775 mm (35)
  • 4.801 mm (41)
  • 4.875 mm (15)
  • 4.95 mm (15)
  • 4.976 mm (28)
  • 5.0 mm (13)
  • 5.5 mm (13)
  • 6.0 mm (13)
  • 6.351 mm (13)
Cutting Width Min до Cutting Width Max
Insert Size
Insert Size
  • 1 (1)
  • 2 (25)
  • 3 (30)
  • 4 (10)
  • 6 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.138 in (23)
  • 0.21 in (28)
  • 0.225 in (1)
  • 0.294 in (13)
  • 0.334 in (2)
Maximum Cutting Depth Min до Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.5 mm (23)
  • 5.325 mm (28)
  • 5.726 mm (1)
  • 7.476 mm (13)
  • 8.475 mm (2)
Maximum Cutting Depth Min до Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • H W (66)
backEnd
Connection Type
Connection Type
  • SQUARE SHANK (47)
Shank Height
Shank Height
  • 0.375 in (1)
  • 0.473 in (2)
  • 0.5 in (4)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (6)
  • 0.787 in (4)
  • 0.984 in (6)
  • 1.0 in (12)
  • 1.25 in (5)
  • 1.26 in (2)
Shank Height Min до Shank Height Max
Shank Height
Shank Height
  • 9.525 mm (1)
  • 12.0 mm (2)
  • 12.701 mm (4)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (6)
  • 20.0 mm (4)
  • 25.0 mm (6)
  • 25.401 mm (12)
  • 31.75 mm (5)
  • 32.0 mm (2)
Shank Height Min до Shank Height Max
Shank Width
Shank Width
  • 0.375 in (1)
  • 0.473 in (2)
  • 0.5 in (4)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (6)
  • 0.787 in (4)
  • 0.984 in (6)
  • 1.0 in (13)
  • 1.25 in (4)
  • 1.26 in (2)
Shank Width Min до Shank Width Max
Shank Width
Shank Width
  • 9.525 mm (1)
  • 12.0 mm (2)
  • 12.701 mm (4)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (6)
  • 20.0 mm (4)
  • 25.0 mm (6)
  • 25.401 mm (13)
  • 31.75 mm (4)
  • 32.0 mm (2)
Shank Width Min до Shank Width Max
No filters matching ""

Integral Toolholders • NS • Metric

(30) Integral Toolholders • NS • Metric

NAS

(20) NAS

Integral Toolholders • NAS

(8) Integral Toolholders • NAS

NAS

(8) NAS

NAS

(1) NAS
Вы собираетесь добавить на страницу «Мои решения». Хотите продолжить?
product-image
Please adjust the following properties from

Номер по каталогу ISO

Номер по каталогу ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

Вы должны войти в систему, чтобы увидеть информацию на панели мониторинга
Session expired due to inactivity, please login again
Товары (), которые вы пытались добавить в корзину, недоступны, обратитесь в центр обслуживания клиентов.
товар(-ы) успешно добавлен(-ы) в корзину
Показать корзину

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Номер по каталогу ISO Сплав    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Thank you for your successful registration. You now have immediate access to log in and utilize the site.

You are about to leave the Solution building process.

Are you sure you want to leave?