Крепление P • Для пластин без заднего угла
Фильтры
Фильтры
Просмотреть фильтры в
Метрическая системаДюймовая система
Workpiece Material
Workpiece Material
- P Steel (107)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(107)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(107)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(107)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(107)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(107)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(107)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(107)
- M Stainless Steel (106)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(106)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(106)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(106)
- K Cast Iron (107)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(107)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(107)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(107)
- N Non-Ferrous Materials (101)
- N1Wrought Aluminum (101)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(101)
- N3High-Silicon Aluminum Alloys Si >12.2%(49)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (101)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (49)
- N6Carbon, Graphite Composites, CFRP (49)
- N7MMC's (40)
- S High-Temp Alloys (106)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(106)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(106)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(106)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(101)
- H Hardened Materials (74)
- H1Hardened Materials 44-48 HRC(74)
- H2Hardened Materials 48-55 HRC(74)
- H3Hardened Materials 56-60 HRC(70)
- H4Hardened Materials >60 HRC(70)
Select All Star
- IN (2)
Applications
Applications
Facing (91)
Multiple Direction Cutting (62)
Profiling (55)
Turning (107)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (107)
- Lightly Interrupted Cut (107)
- Smooth Cut (107)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (19)
- 63.0 (2)
- 75.0 (33)
- 90.0 (12)
- 93.0 (14)
- 95.0 (27)
до
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (39)
- 2.0 (31)
- 3.0 (18)
- 4.0 (84)
- 6.0 (22)
- 8.0 (69)
до
Over All Length [L]
Over All Length [L]
- 3.938 in(6)
- 4.921 in(21)
- 5.906 in(32)
- 6.694 in(31)
- 7.875 in(2)
- 9.843 in(12)
- 11.811 in(3)
до
Over All Length [L]
Over All Length [L]
- 100.0 mm(6)
- 125.0 mm(21)
- 150.0 mm(32)
- 170.0 mm(31)
- 200.0 mm(2)
- 250.0 mm(12)
- 300.0 mm(3)
до
Corner Radius
Corner Radius
- 0.004 in(16)
- 0.008 in(27)
- 0.014 in(11)
- 0.016 in(65)
- 0.024 in(6)
- 0.031 in(102)
- 0.047 in(101)
- 0.063 in(97)
- 0.095 in(42)
до
Corner Radius
Corner Radius
- 0.1 mm(16)
- 0.2 mm(27)
- 0.351 mm(11)
- 0.4 mm(65)
- 0.601 mm(6)
- 0.8 mm(102)
- 1.201 mm(101)
- 1.6 mm(97)
- 2.401 mm(42)
до
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (68)
- CW5025 (75)
- HK1500 (63)
- PB100 (16)
- PB170 (16)
- PB250 (16)
- PB300 (16)
- SP0A00 (12)
- SP0NTA (1)
- SPN4W2 (11)
- THM (53)
- THM-X (44)
- THMF-X (34)
- TN10P (86)
- TN10U (56)
- TN15M (89)
- TN15U (55)
- TN2000 (79)
- TN20K (97)
- TN20P (102)
- TN30M (94)
- TN30P (92)
- TN4000 (79)
- TN5015 (95)
- TN5020 (90)
- TN5105 (60)
- TN5120 (90)
- TN6010 (27)
- TN6025 (51)
- TN7005 (38)
- TN7010 (101)
- TN7015 (103)
- TN7025 (103)
- TN7035 (98)
- TN7105 (48)
- TN7110 (80)
- TN7115 (96)
- TN7125 (103)
- TN7135 (98)
- TN8025 (94)
- TTI15 (32)
- TTM (4)
- TTM09 (33)
- TTR (37)
- TTR-X (11)
- TTS (60)
- TTX (37)
- W00342 (13)
- WBH10C (45)
- WBH10P (16)
- WBH10U (40)
- WBH20P (51)
- WBH25P (34)
- WBH25U (45)
- WBH30P (16)
- WBK40U (33)
- WBK45U (33)
- WDN00U (16)
- WDN25U (28)
- WK05CT (100)
- WK15CT (60)
- WK20CT (102)
- WM15CT (101)
- WM25CT (107)
- WM35CT (101)
- WP05CT (22)
- WP15CT (107)
- WP20TT (5)
- WP25CT (107)
- WP35CT (106)
- WS10PT (95)
- WS25PT (101)
- WU10HT (90)
- WU10PT (60)
- WU25PT (60)
Hand Of Tool
Hand Of Tool
- L (48)
- N (4)
- R (55)
Wiper Insert
Wiper Insert
- N (107)
- Y (32)
F Dimension
F Dimension
- 10.0 mm(1)
- 12.5 mm(3)
- 16.0 mm(1)
- 17.0 mm(3)
- 20.0 mm(7)
- 22.0 mm(6)
- 25.0 mm(17)
- 27.0 mm(5)
- 32.0 mm(34)
- 35.0 mm(4)
- 40.0 mm(16)
- 43.0 mm(1)
- 50.0 mm(9)
до
F Dimension
F Dimension
- 0.394 in(1)
- 0.492 in(3)
- 0.63 in(1)
- 0.669 in(3)
- 0.787 in(7)
- 0.866 in(6)
- 0.984 in(17)
- 1.063 in(5)
- 1.26 in(34)
- 1.379 in(4)
- 1.575 in(16)
- 1.693 in(1)
- 1.969 in(9)
до
Cutting Direction
Cutting Direction
- B (27)
- E (16)
- S (64)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (88)
- NEGATIVE-ZERO (19)
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (35)
- D-DIAMOND/RHOMBIC 55 (16)
- S-SQUARE 90 (34)
- T-TRIANGLE 60 (12)
- W-TRIGON 80 (10)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (56)
- B L (51)
- C A (68)
- C N (94)
- D P (28)
- H T (32)
- H W (107)
backEnd
Shank Height
Shank Height
- 0.63 in(6)
- 0.787 in(21)
- 0.984 in(32)
- 1.26 in(31)
- 1.575 in(16)
- 1.969 in(1)
до
Shank Height
Shank Height
- 16.0 mm(6)
- 20.0 mm(21)
- 25.0 mm(32)
- 32.0 mm(31)
- 40.0 mm(16)
- 50.0 mm(1)
до
Shank Width
Shank Width
- 0.63 in(6)
- 0.787 in(21)
- 0.984 in(43)
- 1.26 in(22)
- 1.575 in(14)
- 1.969 in(1)
до
Shank Width
Shank Width
- 16.0 mm(6)
- 20.0 mm(21)
- 25.0 mm(43)
- 32.0 mm(22)
- 40.0 mm(14)
- 50.0 mm(1)
до
No filters matching ""