Крепление S • Для пластин с задним углом

Выбрать фильтры
Фильтры
Просмотреть фильтры в
Метрическая система
Дюймовая система
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (131)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (131)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (131)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (131)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (131)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (131)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (131)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (131)
  • M Stainless Steel (131)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (131)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (131)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (131)
  • K Cast Iron (131)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (131)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (131)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (131)
  • N Non-Ferrous Materials (136)
    • N1
      Wrought Aluminum (136)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (136)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (122)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (121)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (115)
    • N6
      Carbon, Graphite Composites, CFRP (115)
    • N7
      MMC's (115)
  • S High-Temp Alloys (116)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (116)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (116)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (116)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (100)
  • H Hardened Materials (120)
    • H1
      Hardened Materials 44-48 HRC (120)
    • H2
      Hardened Materials 48-55 HRC (120)
    • H3
      Hardened Materials 56-60 HRC (120)
    • H4
      Hardened Materials >60 HRC (120)
Select All Star
  • DE (29)
  • GB (3)
  • SG (1)
  • US (6)
Applications
Applications
  • Back Boring Back Boring (12)
  • Facing Facing (4)
  • ID Facing ID Facing (1)
  • Multiple Direction Cutting Multiple Direction Cutting (120)
  • Profiling Profiling (57)
  • TRN Boring TRN Boring (113)
  • Turning Turning (4)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (127)
  • Lightly Interrupted Cut (131)
  • Smooth Cut (131)
  • Varying Depth of Cut (124)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 0.0 (1)
  • -3.0 (1)
  • 90.0 (35)
  • 93.0 (33)
  • 95.0 (58)
  • 107.5 (14)
Tool Cutting Edge Angle Min до Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (124)
  • 2.0 (117)
  • 3.0 (23)
  • 4.0 (65)
Cutting Edges Per Insert Min до Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 4.331 in (5)
  • 4.852 in (1)
  • 4.892 in (1)
  • 4.921 in (15)
  • 5.876 in (1)
  • 5.906 in (6)
  • 5.955 in (2)
  • 6.0 in (8)
  • 7.087 in (8)
  • 7.875 in (19)
  • 8.0 in (11)
  • 9.843 in (16)
  • 9.9 in (1)
  • 10.0 in (19)
  • 11.811 in (20)
  • 12.0 in (6)
  • 13.781 in (1)
  • 14.0 in (2)
Over All Length [L] Min до Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 110.0 mm (5)
  • 123.25 mm (1)
  • 124.25 mm (1)
  • 125.0 mm (15)
  • 149.25 mm (1)
  • 150.0 mm (6)
  • 151.25 mm (2)
  • 152.4 mm (8)
  • 180.0 mm (8)
  • 200.0 mm (19)
  • 203.201 mm (11)
  • 250.0 mm (16)
  • 251.451 mm (1)
  • 254.0 mm (19)
  • 300.0 mm (20)
  • 304.8 mm (6)
  • 350.0 mm (1)
  • 355.6 mm (2)
Over All Length [L] Min до Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (62)
  • 0.008 in (132)
  • 0.016 in (140)
  • 0.031 in (137)
  • 0.047 in (56)
  • 0.063 in (2)
Corner Radius Min до Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (62)
  • 0.2 mm (132)
  • 0.4 mm (140)
  • 0.8 mm (137)
  • 1.201 mm (56)
  • 1.6 mm (2)
Corner Radius Min до Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CG5 (16)
  • CG6 (7)
  • CM1 (16)
  • HCK10 (69)
  • HK1500 (59)
  • HK35 (59)
  • HWK10 (9)
  • HWK15 (69)
  • K420 (18)
  • PB100 (56)
  • PB170 (41)
  • PB250 (63)
  • PB300 (32)
  • PD100 (69)
  • PD50 (57)
  • SP0G00 (9)
  • SP0PW3 (7)
  • SPN3W1 (12)
  • THM (96)
  • THM-X (60)
  • TN1000 (23)
  • TN10P (96)
  • TN10U (96)
  • TN15M (94)
  • TN15U (87)
  • TN2000 (66)
  • TN20K (96)
  • TN20P (96)
  • TN30M (94)
  • TN4000 (41)
  • TN5015 (77)
  • TN5020 (87)
  • TN5105 (77)
  • TN5120 (96)
  • TN6010 (45)
  • TN6025 (38)
  • TN7005 (46)
  • TN7010 (87)
  • TN7015 (96)
  • TN7025 (87)
  • TN7035 (87)
  • TN7105 (94)
  • TN7110 (96)
  • TN7115 (96)
  • TN7125 (96)
  • TN7135 (96)
  • TN8025 (81)
  • TTI15 (64)
  • TTM (12)
  • TTM09 (17)
  • TTR (80)
  • TTS (35)
  • TTX (53)
  • W00160 (1)
  • W00162 (15)
  • W00342 (40)
  • WBH10C (63)
  • WBH10P (98)
  • WBH10U (107)
  • WBH20P (65)
  • WBH25P (111)
  • WBH25U (43)
  • WBH30P (79)
  • WBK45U (52)
  • WDN00U (60)
  • WDN25U (124)
  • WK05CT (90)
  • WK15CT (81)
  • WK20CT (129)
  • WM15CT (128)
  • WM25CT (131)
  • WP15CT (131)
  • WP20TT (46)
  • WP25CT (137)
  • WP35CT (62)
  • WS10PT (64)
  • WS25PT (57)
  • WU05PT (84)
  • WU10HT (90)
  • WU10PT (81)
  • WU20HT (19)
  • WU25PT (90)
  • YY4200 (4)
Hand Of Tool
Hand Of Tool
  • L (47)
  • R (95)
Wiper Insert
Wiper Insert
  • N (140)
  • Y (65)
F Dimension
F Dimension
  • 4.5 mm (3)
  • 5.0 mm (2)
  • 5.875 mm (2)
  • 6.0 mm (7)
  • 6.351 mm (6)
  • 6.875 mm (1)
  • 7.0 mm (13)
  • 7.926 mm (9)
  • 9.0 mm (12)
  • 9.525 mm (1)
  • 10.3 mm (5)
  • 11.0 mm (19)
  • 11.101 mm (2)
  • 12.701 mm (9)
  • 12.875 mm (1)
  • 13.0 mm (16)
  • 14.275 mm (5)
  • 16.25 mm (3)
  • 17.0 mm (16)
  • 19.05 mm (3)
  • 19.425 mm (1)
  • 22.0 mm (5)
  • 22.6 mm (1)
F Dimension Min до F Dimension Max
F Dimension
F Dimension
  • 0.177 in (3)
  • 0.197 in (2)
  • 0.231 in (2)
  • 0.237 in (7)
  • 0.25 in (6)
  • 0.271 in (1)
  • 0.276 in (13)
  • 0.312 in (9)
  • 0.354 in (12)
  • 0.375 in (1)
  • 0.406 in (5)
  • 0.433 in (19)
  • 0.437 in (2)
  • 0.5 in (9)
  • 0.507 in (1)
  • 0.512 in (16)
  • 0.562 in (5)
  • 0.64 in (3)
  • 0.669 in (16)
  • 0.75 in (3)
  • 0.765 in (1)
  • 0.866 in (5)
  • 0.89 in (1)
F Dimension Min до F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 8.0 mm (3)
  • 10.0 mm (2)
  • 11.0 mm (8)
  • 12.201 mm (7)
  • 13.0 mm (14)
  • 15.25 mm (10)
  • 16.0 mm (12)
  • 18.55 mm (2)
  • 19.55 mm (5)
  • 20.0 mm (19)
  • 23.625 mm (9)
  • 24.901 mm (5)
  • 25.0 mm (17)
  • 30.475 mm (3)
  • 32.0 mm (16)
  • 33.025 mm (3)
  • 37.35 mm (1)
  • 40.0 mm (5)
  • 44.7 mm (1)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.315 in (3)
  • 0.394 in (2)
  • 0.433 in (8)
  • 0.48 in (7)
  • 0.512 in (14)
  • 0.6 in (10)
  • 0.63 in (12)
  • 0.73 in (2)
  • 0.77 in (5)
  • 0.787 in (19)
  • 0.93 in (9)
  • 0.98 in (5)
  • 0.984 in (17)
  • 1.2 in (3)
  • 1.26 in (16)
  • 1.3 in (3)
  • 1.47 in (1)
  • 1.575 in (5)
  • 1.76 in (1)
Minimum Axial Groove Diameter Min до Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (57)
  • E (84)
  • P (1)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (135)
  • NEUTRAL (ZERO) (7)
Maximum Bore Depth
Maximum Bore Depth
  • 1.26 in (2)
  • 1.417 in (3)
  • 1.499 in (4)
  • 1.5 in (3)
  • 1.575 in (9)
  • 1.875 in (1)
  • 1.891 in (12)
  • 2.0 in (7)
  • 2.25 in (1)
  • 2.362 in (5)
  • 2.499 in (1)
  • 2.5 in (3)
  • 2.52 in (10)
  • 2.835 in (8)
  • 3.0 in (16)
  • 3.008 in (1)
  • 3.15 in (7)
  • 3.75 in (1)
  • 3.781 in (9)
  • 3.938 in (10)
  • 4.0 in (5)
  • 4.5 in (1)
  • 4.724 in (10)
  • 5.0 in (1)
  • 5.039 in (4)
  • 5.906 in (6)
  • 6.0 in (1)
  • 7.559 in (1)
Maximum Bore Depth Min до Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 32.0 mm (2)
  • 36.0 mm (3)
  • 38.075 mm (4)
  • 38.1 mm (3)
  • 40.0 mm (9)
  • 47.625 mm (1)
  • 48.0 mm (12)
  • 50.801 mm (7)
  • 57.151 mm (1)
  • 60.0 mm (5)
  • 63.475 mm (1)
  • 63.5 mm (3)
  • 64.0 mm (10)
  • 72.0 mm (8)
  • 76.2 mm (16)
  • 76.4 mm (1)
  • 80.0 mm (7)
  • 95.25 mm (1)
  • 96.0 mm (9)
  • 100.0 mm (10)
  • 101.601 mm (5)
  • 114.301 mm (1)
  • 120.0 mm (10)
  • 127.0 mm (1)
  • 128.0 mm (4)
  • 150.0 mm (6)
  • 152.4 mm (1)
  • 192.0 mm (1)
Maximum Bore Depth Min до Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (58)
  • S (84)
frontEnd
Clamp Style
Clamp Style
  • S (141)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (70)
  • D-DIAMOND/RHOMBIC 55 (39)
  • T-TRIANGLE 60 (23)
  • V-DIAMOND/RHOMBIC 35 (10)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.11 in (1)
  • 0.183 in (1)
  • 0.187 in (1)
Maximum Cutting Depth Min до Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 2.801 mm (1)
  • 4.65 mm (1)
  • 4.75 mm (1)
Maximum Cutting Depth Min до Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (124)
  • B L (128)
  • C N (31)
  • D P (131)
  • H T (64)
  • H W (140)
backEnd
Back-End Diameter
Back-End Diameter
  • 6.0 mm (3)
  • 7.95 mm (1)
  • 8.0 mm (10)
  • 9.525 mm (8)
  • 10.0 mm (14)
  • 12.0 mm (12)
  • 12.701 mm (11)
  • 15.875 mm (5)
  • 16.0 mm (19)
  • 19.05 mm (13)
  • 19.1 mm (1)
  • 20.0 mm (17)
  • 25.0 mm (16)
  • 25.401 mm (5)
  • 31.75 mm (1)
  • 32.0 mm (5)
  • 38.1 mm (1)
Back-End Diameter Min до Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.237 in (3)
  • 0.313 in (1)
  • 0.315 in (10)
  • 0.375 in (8)
  • 0.394 in (14)
  • 0.473 in (12)
  • 0.5 in (11)
  • 0.625 in (5)
  • 0.63 in (19)
  • 0.75 in (13)
  • 0.752 in (1)
  • 0.787 in (17)
  • 0.984 in (16)
  • 1.0 in (5)
  • 1.25 in (1)
  • 1.26 in (5)
  • 1.5 in (1)
Back-End Diameter Min до Back-End Diameter Max
No filters matching ""