M370 • ストレートシャンク • W008..• メトリック
ストレートシャンクエンドミル • 中切削 • メトリック
特徴と利点
- Double-sided, six cutting edges.
- Highest metal removal rates.
- First choice for roughing applications.
使用法と用途
シャンク — ストレート プレーン
3Dプロファイル加工
側面加工／ショルダー加工：粗加工
溝加工：スクエアエンド
フェイスミーリング
ランピング加工：ブランク
ポケット溝加工
プランジミーリング
ミーリング — スルークーラント
フィルタと列
Filters
フィルタ
フィルタ表示
メートル
インチ
Workpiece Material
Workpiece Material
-
P Steel (8)
-
P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (8)
-
P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (8)
-
P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (8)
-
P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (8)
-
P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (8)
-
P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (8)
-
P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (8)
-
-
M Stainless Steel (8)
-
M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (8)
-
M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (8)
-
M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (8)
-
-
K Cast Iron (8)
-
K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (8)
-
K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (8)
-
K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (8)
-
-
N Non-Ferrous Materials (8)
-
N1Wrought Aluminum (8)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (8)
-
N3High-Silicon Aluminum Alloys Si >12.2% (8)
-
-
S High-Temp Alloys (8)
-
S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (8)
-
S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (8)
-
S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (8)
-
S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (8)
-
-
H Hardened Materials (8)
-
H1Hardened Materials 44-48 HRC (8)
-
Select All Star
-
CN (2)
-
DE (4)
-
SG (4)
Applications
Applications
-
Face Milling (8)
-
Pocket (8)
-
Pocket Helical (8)
-
Pocket Milling (8)
-
Pocket Plunge Milling (8)
-
Profile Milling (8)
-
Ramping (8)
-
Shoulder Milling (8)
-
-
Slot Milling (8)
Cutting Diameter
Cutting Diameter
-
0.441 in (2)
-
0.445 in (2)
-
0.555 in (1)
-
0.711 in (1)
-
0.713 in (1)
-
0.717 in (1)
to
Cutting Diameter
Cutting Diameter
-
11.201 mm (2)
-
11.3 mm (2)
-
14.101 mm (1)
-
18.05 mm (1)
-
18.1 mm (1)
-
18.2 mm (1)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
-
25.0 mm (4)
-
28.0 mm (1)
-
32.0 mm (3)
to
Maximum Cutting Diameter
Maximum Cutting Diameter
-
0.984 in (4)
-
1.102 in (1)
-
1.26 in (3)
to
Reach
Reach
-
1.575 in (6)
-
1.969 in (2)
to
Reach
Reach
-
40.0 mm (6)
-
50.0 mm (2)
to
Number of Flutes
Number of Flutes
-
2 (2)
-
3 (4)
-
4 (2)
Over All Length [L]
Over All Length [L]
-
5.906 in (2)
-
7.875 in (4)
-
11.811 in (2)
to
Over All Length [L]
Over All Length [L]
-
150.0 mm (2)
-
200.0 mm (4)
-
300.0 mm (2)
to
application
Grade Of Cutting Tool
Grade Of Cutting Tool
-
TN5515 (8)
-
TN6520 (8)
-
TN6525 (8)
-
TN6540 (8)
-
TN7535 (8)
-
WK15CM (8)
-
WP25PM (8)
-
WP40PM (8)
-
WS30PM (8)
-
WS40PM (8)
Maximum Ramp Angle
Maximum Ramp Angle
-
1.41 (5)
-
1.73 (1)
-
2.09 (2)
to
frontEnd
Insert Shape
Insert Shape
-
X-TRIGON WO_J 101.5 (8)
-
X-TRIGON WO_J 80 (8)
Neck Diameter
Neck Diameter
-
0.828 in (1)
-
0.866 in (3)
-
0.906 in (1)
-
1.143 in (3)
to
Neck Diameter
Neck Diameter
-
21.0 mm (1)
-
22.0 mm (3)
-
23.0 mm (1)
-
29.0 mm (3)
to
backEnd
Back-End Diameter
Back-End Diameter
-
25.0 mm (5)
-
32.0 mm (3)
to
Back-End Diameter
Back-End Diameter
-
0.984 in (5)
-
1.26 in (3)
to
No filters matching ""
以下に示すパラメータのいずれかを使用して表示列を変更することができます。最大7列まで表示できます。
表示
1-
8
/
8 結果
メートル
インチ
表示
メートル
インチ
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | First Choice | [D1] Effective Cutting Diameter | [D1] Effective Cutting Diameter | [L] Overall Length | [L] Overall Length | [D1MAX] Maximum Cutting Diameter | [D1MAX] Maximum Cutting Diameter | Coolant Supply | Max RPM | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4008281 | M370D025Z02A25WO08L200 | M370D025Z02A25WO08L200 | 11.2 | .4409 | 200 | 7.874 | 25 | .984 | Y | 46000 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$378.81
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4170920 | M370D025Z02A25WO08L300 | M370D025Z02A25WO08L300 | 11.3 | .44 | 300 | 11.811 | 25 | .984 | Y | 46000 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$439.05
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4056189 | M370D025Z03A25WO08L150 | M370D025Z03A25WO08L150 | 11.2 | .44 | 150 | 5.906 | 25 | .984 | Y | 46000 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$358.74
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4170919 | M370D025Z03A25WO08L200 | M370D025Z03A25WO08L200 | 11.3 | .44 | 200 | 7.874 | 25 | .984 | Y | 46000 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$385.51
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4056190 | M370D028Z03A25WO08L200 | M370D028Z03A25WO08L200 | 14.1 | .56 | 200 | 7.874 | 28 | 1.102 | Y | 42400 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$400.23
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4170921 | M370D032Z03A32WO08L300 | M370D032Z03A32WO08L300 | 18.2 | .72 | 300 | 11.811 | 32 | 1.26 | Y | 38700 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$473.84
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4056191 | M370D032Z04A32WO08L150 | M370D032Z04A32WO08L150 | 18.1 | .71 | 150 | 5.906 | 32 | 1.26 | Y | 38700 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$381.49
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4056192 | M370D032Z04A32WO08L200 | M370D032Z04A32WO08L200 | 18.06 | .711 | 200 | 7.874 | 32 | 1.26 | Y | 38700 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
定価:
$408.24
/各
価格::
数量
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
インサート選択の手引き
| Light
|
General
|
Heavy
|
||||
| Material
|
Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | ...MM | WP40PM | ...MM | WP40PM | ...MM | WP40PM |
| P3–P4 | ...MM | WP25PM | ...MM | WP40PM | ...MH | WP40PM |
| P5–P6 | ...MM | WP25PM | ...MH | WP25PM | ...MH | WP40PM |
| M1–M2 | ...MM | WP25PM | ...MM | WS30PM | ...MM | WP40PM |
| M3 | ...MM | WP25PM | ...MM | WP25PM | ...MM | WP40PM |
| K1–K2 | ...MH | WK15CM | ...MH | WK15CM | ...MH | WK15CM |
| K3 | ...MH | TN6520 | ...MH | TN6520 | ...MH | WK15CM |
| N1–N2 | – | – | – | – | – | – |
| N3 | – | – | – | – | – | – |
| S1–S2 | ...MM | WP25PM | ...MM | WS30PM | ...MM | WP40PM |
| S3 | ...MM | WS30PM | ...MM | WS30PM | ...MM | WP40PM |
| S4 | ...MM | WS30PM | ...MM | WP40PM | ...MM | WP40PM |
| H1 | ...MH | WP25PM | – | – | – | – |
推奨フィード量の開始値［mm］
| Light
|
General
|
Heavy
|
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5 % | 10 % | 20 % | 30 % | 40
|
||||||||||||
| ..MM | 0,90 | 1,67 | 4,09 | 0,65 | 1,19 | 2,83 | 0,48 | 0,88 | 2,08 | 0,42 | 0,77 | 1,80 | 0,38 | 0,70 | 1,64 | ..MM |
| ..MH | 0,90 | 2,34 | 5,00 | 0,65 | 1,66 | 3,41 | 0,48 | 1,23 | 2,49 | 0,42 | 1,07 | 2,16 | 0,38 | 0,98 | 1,97 | ..MH |
Recommended Starting Feeds [IPT]
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40
|
||||||||||||
| ...MM | .035 | .061 | .150 | .025 | .044 | .104 | .019 | .033 | .076 | .017 | .028 | .066 | .015 | .026 | .061 | ...MM |
| ...MH | .035 | .092 | .197 | .025 | .065 | .134 | .019 | .048 | .098 | .017 | .042 | .085 | .015 | .038 | .078 | ...MH |
| Light
|
General
|
Heavy
|
| Material Group | TN6525 | TN6540 | WK15CM | WP25PM | WP35CM | WP40PM | WS30PM | WS40PM | WU35PM | |||||||||||||||||||
| P | 1 | 1340 | 1045 | 925 | 1180 | 925 | 785 | – | – | – | 1295 | 1120 | 1060 | 1790 | 1555 | 1460 | 1165 | 1025 | 965 | – | – | – | – | – | – | 850 | 750 | 705 |
| 2 | 1045 | 830 | 710 | 830 | 630 | 550 | – | – | – | 1080 | 940 | 785 | 1105 | 1000 | 905 | 985 | 845 | 710 | – | – | – | – | – | – | 720 | 620 | 520 | |
| 3 | 925 | 710 | 610 | 710 | 550 | 450 | – | – | – | 1000 | 845 | 690 | 1000 | 905 | 805 | 905 | 770 | 630 | – | – | – | – | – | – | 655 | 555 | 455 | |
| 4 | 770 | 550 | 475 | 590 | 430 | 355 | – | – | – | 890 | 725 | 590 | 750 | 690 | 630 | 805 | 670 | 535 | – | – | – | – | – | – | 590 | 490 | 390 | |
| 5 | 1025 | 770 | 650 | 785 | 590 | 490 | – | – | – | 725 | 670 | 590 | 1025 | 905 | 830 | 670 | 610 | 535 | – | – | – | 560 | 475 | 395 | 490 | 440 | 390 | |
| 6 | 670 | 535 | 430 | 535 | 395 | 335 | – | – | – | 650 | 490 | 395 | 630 | 535 | 430 | 590 | 450 | 355 | – | – | – | 490 | 360 | 260 | 425 | 325 | 260 | |
| M | 1 | 630 | 395 | 260 | 430 | 260 | 200 | – | – | – | 805 | 710 | 650 | 805 | 725 | 610 | 770 | 670 | 610 | 890 | 785 | 725 | 690 | 560 | 460 | 555 | 490 | 440 |
| 2 | 395 | 260 | 155 | 260 | 155 | 140 | – | – | – | 725 | 630 | 510 | 725 | 630 | 550 | 690 | 590 | 490 | 805 | 710 | 570 | 590 | 475 | 395 | 505 | 425 | 360 | |
| 3 | 415 | 260 | 180 | 275 | 155 | 140 | – | – | – | 550 | 475 | 370 | 570 | 510 | 450 | 510 | 450 | 355 | 610 | 535 | 415 | 475 | 360 | 280 | 375 | 325 | 260 | |
| K | 1 | 905 | 805 | 725 | 725 | 670 | 590 | 1655 | 1520 | 1340 | 905 | 805 | 725 | 1165 | 1045 | 940 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 710 | 630 | 590 | 570 | 510 | 450 | 1320 | 1165 | 1080 | 710 | 630 | 590 | 925 | 830 | 750 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 590 | 535 | 475 | 510 | 475 | 415 | 1105 | 985 | 905 | 590 | 535 | 475 | 770 | 690 | 630 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | 155 | 120 | 95 | – | – | – | 155 | 140 | 95 | – | – | – | 155 | 140 | 120 | 180 | 155 | 120 | 130 | 115 | 80 | 110 | 95 | 80 |
| 2 | – | – | – | 80 | 60 | 40 | – | – | – | 155 | 140 | 95 | – | – | – | 155 | 140 | 120 | 180 | 155 | 120 | 130 | 115 | 80 | 110 | 95 | 80 | |
| 3 | – | – | – | 235 | 140 | 95 | – | – | – | 200 | 155 | 95 | – | – | – | 200 | 155 | 120 | 215 | 180 | 120 | 165 | 130 | 80 | 145 | 110 | 80 | |
| 4 | – | – | – | 200 | 95 | 80 | – | – | – | 275 | 200 | 140 | 260 | 200 | 130 | 260 | 200 | 140 | 335 | 235 | 155 | 195 | 165 | 100 | 195 | 145 | 95 | |
| H | 1 | – | – | – | – | – | – | – | – | – | 475 | 355 | 275 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |