通知

すべて既読にする
Mobile Menu

TopThread™

フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (210)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (210)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (210)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (210)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (210)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (210)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (210)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (210)
  • M Stainless Steel (210)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (210)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (210)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (210)
  • K Cast Iron (210)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (210)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (210)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (210)
  • N Non-Ferrous Materials (210)
    • N1
      Wrought Aluminum
      (210)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (210)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (210)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (111)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (210)
    • N6
      Carbon, Graphite Composites, CFRP
      (210)
    • N7
      MMC's
      (111)
  • S High-Temp Alloys (210)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (210)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (210)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (210)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (210)
  • H Hardened Materials (66)
    • H1
      Hardened Materials 44-48 HRC
      (66)
    • H2
      Hardened Materials 48-55 HRC
      (66)
    • H3
      Hardened Materials 56-60 HRC
      (16)
    • H4
      Hardened Materials >60 HRC
      (16)
Select All Star
  • DE (5)
  • IN (3)
  • US (83)
Applications
Applications
  • Chamfer Turning Chamfer Turning (6)
  • Cut-Off Cut-Off (6)
  • Deep Grooving Deep Grooving (6)
  • Face Grooving Face Grooving (72)
  • Facing Facing (12)
  • Grooving Grooving (101)
  • ID Grooving ID Grooving (59)
  • ID Thread Turning ID Thread Turning (129)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • OD Thread Turning OD Thread Turning (167)
  • Plunge Turning Plunge Turning (6)
  • Profiling Profiling (8)
  • TRN Boring TRN Boring (6)
  • Threading Threading (93)
  • Turning Turning (12)
Type of Thread
Type of Thread
  • 60 (157)
  • ACME (89)
  • API (16)
  • API RD (55)
  • BSW (35)
  • BUTTRESS (52)
  • M (20)
  • NPT (12)
  • STUB ACME (55)
  • UN (147)
  • UNJ (35)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (129)
  • Lightly Interrupted Cut (129)
  • Smooth Cut (134)
  • Varying Depth of Cut (129)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (139)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Boring Bar Shank (40)
  • KM (28)
  • Toolholder (48)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (136)
  • 2.0 (201)
  • 4.0 (2)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (12)
  • 0.003 in (113)
  • 0.004 in (99)
  • 0.005 in (14)
  • 0.006 in (26)
  • 0.007 in (122)
  • 0.008 in (136)
  • 0.01 in (72)
  • 0.011 in (12)
  • 0.012 in (34)
  • 0.014 in (77)
  • 0.016 in (12)
  • 0.017 in (54)
  • 0.019 in (16)
  • 0.02 in (67)
  • 0.023 in (74)
  • 0.03 in (55)
  • 0.031 in (107)
  • 0.035 in (16)
  • 0.039 in (107)
  • 0.047 in (107)
  • 0.049 in (107)
  • 0.06 in (107)
  • 0.062 in (52)
  • 0.063 in (90)
  • 0.069 in (107)
  • 0.078 in (52)
  • 0.079 in (74)
  • 0.089 in (74)
  • 0.095 in (74)
  • 0.098 in (22)
  • 0.125 in (22)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (12)
  • 0.076 mm (113)
  • 0.1 mm (99)
  • 0.125 mm (14)
  • 0.151 mm (26)
  • 0.176 mm (122)
  • 0.2 mm (136)
  • 0.225 mm (35)
  • 0.25 mm (70)
  • 0.275 mm (12)
  • 0.301 mm (34)
  • 0.325 mm (75)
  • 0.351 mm (58)
  • 0.4 mm (12)
  • 0.426 mm (54)
  • 0.45 mm (16)
  • 0.476 mm (6)
  • 0.5 mm (67)
  • 0.576 mm (74)
  • 0.75 mm (55)
  • 0.775 mm (107)
  • 0.9 mm (16)
  • 1.0 mm (107)
  • 1.201 mm (107)
  • 1.25 mm (107)
  • 1.5 mm (107)
  • 1.576 mm (52)
  • 1.6 mm (90)
  • 1.75 mm (107)
  • 1.975 mm (52)
  • 2.0 mm (74)
  • 2.25 mm (74)
  • 2.401 mm (74)
  • 2.5 mm (22)
  • 3.176 mm (22)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (72)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (72)
Corner Chamfer Min to Corner Chamfer Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (28)
  • K313 (32)
  • K420 (32)
  • K4H (20)
  • K68 (32)
  • KB1345 (16)
  • KB1630 (16)
  • KB5625 (12)
  • KBH20 (6)
  • KC250 (28)
  • KC5010 (32)
  • KC5025 (32)
  • KC5410 (32)
  • KC710 (32)
  • KC720 (32)
  • KC722 (32)
  • KC730 (32)
  • KC732 (12)
  • KC810 (32)
  • KC850 (32)
  • KC910 (20)
  • KC9110 (32)
  • KC9120 (12)
  • KC9320 (32)
  • KC935 (32)
  • KC950 (32)
  • KCK20 (24)
  • KCK20B (32)
  • KCP10B (32)
  • KCP25B (32)
  • KCU10 (32)
  • KCU25 (32)
  • KD050 (6)
  • KD081 (12)
  • KD100 (14)
  • KD120 (16)
  • KD1425 (12)
  • KT175 (28)
  • KT315 (32)
  • KU10T (32)
  • KU25T (32)
  • KU30T (32)
  • KY3000 (16)
  • THM (107)
  • TN10P (87)
  • TN6010 (156)
  • TN6025 (188)
  • TN7110 (129)
  • WU10HT (27)
  • WU10PT (46)
  • WU25PT (25)
Hand Of Tool
Hand Of Tool
  • L (46)
  • R (70)
Wiper Insert
Wiper Insert
  • N (210)
F Dimension
F Dimension
  • 6.551 mm (2)
  • 7.0 mm (2)
  • 10.3 mm (1)
  • 11.0 mm (10)
  • 11.101 mm (2)
  • 12.0 mm (1)
  • 12.701 mm (5)
  • 13.0 mm (4)
  • 14.275 mm (3)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 17.0 mm (12)
  • 17.475 mm (4)
  • 19.05 mm (1)
  • 20.0 mm (1)
  • 22.0 mm (6)
  • 22.225 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (8)
  • 27.0 mm (11)
  • 28.0 mm (1)
  • 31.75 mm (16)
  • 32.0 mm (7)
  • 34.926 mm (2)
  • 35.0 mm (1)
  • 38.1 mm (4)
  • 40.0 mm (2)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.258 in (2)
  • 0.276 in (2)
  • 0.406 in (1)
  • 0.433 in (10)
  • 0.437 in (2)
  • 0.473 in (1)
  • 0.5 in (5)
  • 0.512 in (4)
  • 0.562 in (3)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.669 in (12)
  • 0.689 in (4)
  • 0.75 in (1)
  • 0.787 in (1)
  • 0.866 in (6)
  • 0.875 in (2)
  • 0.984 in (3)
  • 1.0 in (8)
  • 1.063 in (11)
  • 1.102 in (1)
  • 1.25 in (16)
  • 1.26 in (7)
  • 1.375 in (2)
  • 1.379 in (1)
  • 1.5 in (4)
  • 1.575 in (2)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (51)
  • 11.175 mm (2)
  • 11.5 mm (2)
  • 18.5 mm (4)
  • 18.55 mm (2)
  • 20.0 mm (4)
  • 20.326 mm (1)
  • 22.0 mm (2)
  • 25.0 mm (2)
  • 25.401 mm (2)
  • 26.0 mm (2)
  • 28.576 mm (2)
  • 32.0 mm (4)
  • 34.0 mm (8)
  • 34.926 mm (4)
  • 40.0 mm (4)
  • 41.301 mm (24)
  • 44.0 mm (2)
  • 44.45 mm (2)
  • 47.6 mm (24)
  • 50.801 mm (2)
  • 54.0 mm (9)
  • 55.875 mm (1)
  • 56.625 mm (2)
  • 57.2 mm (12)
  • 60.325 mm (1)
  • 63.5 mm (7)
  • 69.851 mm (2)
  • 70.0 mm (1)
  • 76.2 mm (1)
  • 88.9 mm (28)
  • 139.701 mm (24)
  • 174.601 mm (24)
  • 209.601 mm (12)
  • 222.3 mm (12)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (51)
  • 0.44 in (2)
  • 0.453 in (2)
  • 0.728 in (4)
  • 0.73 in (2)
  • 0.787 in (4)
  • 0.8 in (1)
  • 0.866 in (2)
  • 0.984 in (2)
  • 1.0 in (2)
  • 1.024 in (2)
  • 1.125 in (2)
  • 1.26 in (4)
  • 1.339 in (8)
  • 1.375 in (4)
  • 1.575 in (4)
  • 1.627 in (24)
  • 1.732 in (2)
  • 1.75 in (2)
  • 1.874 in (24)
  • 2.0 in (2)
  • 2.126 in (9)
  • 2.2 in (1)
  • 2.229 in (2)
  • 2.253 in (12)
  • 2.375 in (1)
  • 2.5 in (7)
  • 2.75 in (2)
  • 2.757 in (1)
  • 3.0 in (1)
  • 3.5 in (28)
  • 5.5 in (24)
  • 6.875 in (24)
  • 8.252 in (12)
  • 8.752 in (12)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (134)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (134)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Countersunk Angle
Countersunk Angle
  • 14.5 (15)
  • 27.0 (2)
  • 27.5 (2)
  • 30.0 (50)
  • 33.0 (2)
  • 45.0 (1)
Countersunk Angle Min to Countersunk Angle Max
Cutting Direction
Cutting Direction
  • E (54)
  • S (62)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (1)
  • NEUTRAL (ZERO) (115)
Maximum Bore Depth
Maximum Bore Depth
  • 1.0 in (7)
  • 1.23 in (1)
  • 1.232 in (1)
  • 1.29 in (1)
  • 1.5 in (1)
  • 1.575 in (6)
  • 1.655 in (2)
  • 1.891 in (2)
  • 2.0 in (14)
  • 2.169 in (4)
  • 2.209 in (2)
  • 2.5 in (3)
  • 2.52 in (2)
  • 2.757 in (2)
  • 2.955 in (4)
  • 2.993 in (2)
  • 3.0 in (2)
  • 3.15 in (4)
  • 3.781 in (2)
  • 3.938 in (4)
  • 4.0 in (4)
  • 5.0 in (2)
  • 5.039 in (2)
  • 6.0 in (2)
  • 6.299 in (3)
  • 7.0 in (2)
  • 7.875 in (1)
  • 8.0 in (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 25.401 mm (7)
  • 31.25 mm (1)
  • 31.3 mm (1)
  • 32.775 mm (1)
  • 38.1 mm (1)
  • 40.0 mm (6)
  • 42.026 mm (2)
  • 48.0 mm (2)
  • 50.801 mm (14)
  • 55.1 mm (4)
  • 56.1 mm (2)
  • 63.5 mm (3)
  • 64.0 mm (2)
  • 70.025 mm (2)
  • 75.05 mm (4)
  • 76.025 mm (2)
  • 76.2 mm (2)
  • 80.0 mm (4)
  • 96.025 mm (2)
  • 100.0 mm (4)
  • 101.601 mm (4)
  • 127.0 mm (2)
  • 128.0 mm (2)
  • 152.4 mm (2)
  • 160.0 mm (3)
  • 177.8 mm (2)
  • 200.0 mm (1)
  • 203.201 mm (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (2)
  • S (60)
frontEnd
Clamp Style
Clamp Style
  • N (139)
Cutting Width
Cutting Width
  • 0.02 in (55)
  • 0.031 in (55)
  • 0.035 in (16)
  • 0.039 in (107)
  • 0.041 in (39)
  • 0.047 in (112)
  • 0.055 in (55)
  • 0.058 in (55)
  • 0.06 in (107)
  • 0.061 in (31)
  • 0.062 in (112)
  • 0.067 in (55)
  • 0.069 in (107)
  • 0.073 in (52)
  • 0.077 in (55)
  • 0.078 in (52)
  • 0.079 in (107)
  • 0.088 in (107)
  • 0.089 in (107)
  • 0.095 in (112)
  • 0.097 in (12)
  • 0.098 in (107)
  • 0.105 in (12)
  • 0.108 in (107)
  • 0.11 in (12)
  • 0.119 in (129)
  • 0.122 in (12)
  • 0.125 in (129)
  • 0.126 in (72)
  • 0.128 in (107)
  • 0.129 in (16)
  • 0.131 in (6)
  • 0.138 in (129)
  • 0.143 in (12)
  • 0.147 in (31)
  • 0.15 in (16)
  • 0.152 in (55)
  • 0.156 in (52)
  • 0.157 in (74)
  • 0.167 in (56)
  • 0.169 in (12)
  • 0.177 in (74)
  • 0.178 in (12)
  • 0.181 in (6)
  • 0.185 in (14)
  • 0.188 in (65)
  • 0.189 in (74)
  • 0.192 in (27)
  • 0.193 in (27)
  • 0.195 in (52)
  • 0.197 in (22)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.217 in (22)
  • 0.219 in (4)
  • 0.237 in (22)
  • 0.25 in (22)
  • 0.255 in (4)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (55)
  • 0.775 mm (55)
  • 0.8 mm (55)
  • 0.9 mm (16)
  • 1.0 mm (107)
  • 1.05 mm (39)
  • 1.201 mm (112)
  • 1.401 mm (55)
  • 1.475 mm (55)
  • 1.5 mm (107)
  • 1.55 mm (31)
  • 1.576 mm (112)
  • 1.701 mm (55)
  • 1.75 mm (107)
  • 1.826 mm (52)
  • 1.951 mm (55)
  • 1.975 mm (52)
  • 2.0 mm (107)
  • 2.2 mm (107)
  • 2.225 mm (28)
  • 2.25 mm (107)
  • 2.401 mm (112)
  • 2.475 mm (12)
  • 2.5 mm (107)
  • 2.676 mm (12)
  • 2.75 mm (107)
  • 2.801 mm (12)
  • 3.0 mm (129)
  • 3.1 mm (12)
  • 3.176 mm (129)
  • 3.2 mm (72)
  • 3.25 mm (107)
  • 3.276 mm (16)
  • 3.325 mm (6)
  • 3.5 mm (129)
  • 3.6 mm (12)
  • 3.725 mm (31)
  • 3.801 mm (16)
  • 3.85 mm (55)
  • 3.95 mm (52)
  • 3.975 mm (27)
  • 4.0 mm (74)
  • 4.25 mm (56)
  • 4.3 mm (12)
  • 4.5 mm (74)
  • 4.525 mm (12)
  • 4.601 mm (6)
  • 4.7 mm (14)
  • 4.775 mm (65)
  • 4.801 mm (74)
  • 4.875 mm (27)
  • 4.9 mm (27)
  • 4.95 mm (52)
  • 5.0 mm (22)
  • 5.125 mm (4)
  • 5.4 mm (4)
  • 5.5 mm (22)
  • 5.575 mm (4)
  • 6.0 mm (22)
  • 6.351 mm (22)
  • 6.476 mm (4)
Cutting Width Min to Cutting Width Max
Insert Size
Insert Size
  • 1 (6)
  • 2 (57)
  • 3 (54)
  • 4 (19)
  • 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth