M680シリーズ

フィルタを選択
Filters
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (81)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (81)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (81)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (81)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (81)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (81)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (78)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (78)
  • M Stainless Steel (78)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (78)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (78)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (78)
  • K Cast Iron (107)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (107)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (104)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (104)
  • N Non-Ferrous Materials (50)
    • N1
      Wrought Aluminum (50)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (50)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (50)
  • S High-Temp Alloys (71)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (56)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (56)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (56)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (71)
  • H Hardened Materials (35)
    • H1
      Hardened Materials 44-48 HRC (35)
    • H2
      Hardened Materials 48-55 HRC (27)
    • H3
      Hardened Materials 56-60 HRC (27)
Select All Star
  • CN (31)
  • DE (56)
  • GB (8)
  • IN (29)
  • SG (10)
Applications
Applications
  • Face Milling Face Milling (31)
  • Pocket Pocket (8)
  • Pocket Milling Pocket Milling (8)
  • Pocket Plunge Milling Pocket Plunge Milling (8)
  • Ramping Ramping (8)
  • Shoulder Milling Shoulder Milling (31)
  • Shoulder Roughing Shoulder Roughing (8)
  • Shoulder Square End Shoulder Square End (21)
  • Slot Milling Slot Milling (31)
  • Slot Side Slot Side (8)
  • Slot Square End Slot Square End (29)
Cutting Diameter
Cutting Diameter
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.75 in (1)
  • 0.787 in (2)
  • 0.984 in (4)
  • 1.0 in (2)
  • 1.25 in (1)
  • 1.26 in (5)
  • 1.379 in (1)
  • 1.575 in (4)
  • 1.969 in (2)
  • 2.0 in (1)
  • 2.48 in (1)
  • 3.15 in (1)
  • 3.938 in (1)
  • 4.921 in (1)
  • 6.299 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (1)
  • 20.0 mm (2)
  • 25.0 mm (4)
  • 25.401 mm (2)
  • 31.75 mm (1)
  • 32.0 mm (5)
  • 35.0 mm (1)
  • 40.0 mm (4)
  • 50.0 mm (2)
  • 50.801 mm (1)
  • 63.0 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (1)
  • 125.0 mm (1)
  • 160.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 9.0 mm (10)
  • 9.5 mm (4)
  • 13.976 mm (3)
  • 14.0 mm (12)
  • 15.3 mm (1)
  • 15.351 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.354 in (10)
  • 0.374 in (4)
  • 0.55 in (3)
  • 0.551 in (12)
  • 0.602 in (1)
  • 0.604 in (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.063 in (1)
  • 1.071 in (1)
  • 1.181 in (2)
  • 1.186 in (1)
  • 1.26 in (1)
  • 1.286 in (1)
  • 1.5 in (1)
  • 1.536 in (2)
  • 1.566 in (1)
  • 1.567 in (1)
  • 1.575 in (10)
  • 1.72 in (1)
  • 1.772 in (1)
  • 1.969 in (3)
  • 2.025 in (1)
  • 2.45 in (1)
  • 2.48 in (2)
Reach Min to Reach Max
Reach
Reach
  • 27.0 mm (1)
  • 27.201 mm (1)
  • 30.0 mm (2)
  • 30.125 mm (1)
  • 32.0 mm (1)
  • 32.676 mm (1)
  • 38.1 mm (1)
  • 39.0 mm (2)
  • 39.776 mm (1)
  • 39.801 mm (1)
  • 40.0 mm (10)
  • 43.7 mm (1)
  • 45.0 mm (1)
  • 50.0 mm (3)
  • 51.426 mm (1)
  • 62.225 mm (1)
  • 63.0 mm (2)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (23)
  • 90.25 (2)
  • 90.28 (2)
  • 90.4 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (6)
  • B-Cutter Retention Screw (3)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (6)
  • Straight-Cylindrical (8)
  • Weldon (7)
Number of Flutes
Number of Flutes
  • 12 (1)
  • 2 (9)
  • 3 (6)
  • 4 (6)
  • 5 (5)
  • 6 (2)
  • 8 (1)
  • 9 (1)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.5 in (1)
  • 1.575 in (4)
  • 1.772 in (1)
  • 1.969 in (2)
  • 2.047 in (2)
  • 2.48 in (6)
  • 2.953 in (1)
  • 3.228 in (1)
  • 3.781 in (1)
  • 3.938 in (2)
  • 4.0 in (1)
  • 4.331 in (1)
  • 6.0 in (1)
  • 7.087 in (1)
  • 7.875 in (1)
  • 8.0 in (2)
  • 8.661 in (1)
  • 9.8 in (1)
  • 9.843 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 38.1 mm (1)
  • 40.0 mm (4)
  • 45.0 mm (1)
  • 50.0 mm (2)
  • 52.0 mm (2)
  • 63.0 mm (6)
  • 75.0 mm (1)
  • 82.0 mm (1)
  • 96.0 mm (1)
  • 100.0 mm (2)
  • 101.601 mm (1)
  • 110.0 mm (1)
  • 152.4 mm (1)
  • 180.0 mm (1)
  • 200.0 mm (1)
  • 203.201 mm (2)
  • 220.0 mm (1)
  • 248.925 mm (1)
  • 250.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.016 in (30)
  • 0.031 in (65)
  • 0.047 in (57)
  • 0.063 in (33)
  • 0.066 in (17)
  • 0.079 in (32)
  • 0.098 in (21)
  • 0.125 in (20)
  • 0.157 in (21)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (30)
  • 0.8 mm (65)
  • 1.201 mm (57)
  • 1.6 mm (33)
  • 1.675 mm (17)
  • 2.0 mm (32)
  • 2.5 mm (21)
  • 3.176 mm (20)
  • 4.0 mm (21)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (42)
  • THM-U (20)
  • THR (28)
  • TN2510 (27)
  • TN25M (27)
  • TN450 (31)
  • TN5515 (31)
  • TN6501 (22)
  • TN6502 (22)
  • TN6510 (24)
  • TN6520 (25)
  • TN6525 (26)
  • TN6540 (30)
  • TN7525 (31)
  • TN7535 (31)
  • TTI25 (34)
  • TTM (4)
  • TTM08 (30)
  • TTR (17)
  • WK15CM (45)
  • WK15PM (11)
  • WP35CM (46)
  • WP40PM (24)
  • WS30PM (18)
  • WU20PM (34)
Hand Of Tool
Hand Of Tool
  • R (31)
Rough Finish
Rough Finish
  • FR (5)
Wiper Insert
Wiper Insert
  • N (89)
frontEnd
Insert Shape
Insert Shape
  • A-PARALLELOGRAM 85 (13)
  • X-PARALLELOGRAM 80 (102)
  • X-RECTANGLE MILL 4 90 (18)
  • X-RH0MBIC 70 (14)
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • A-PARALLELOGRAM 85 (9)
  • X-PARALLELOGRAM 80 (75)
  • X-RECTANGLE MILL 4 90 (1)
  • X-RH0MBIC 70 (4)
Insert IC Size
Insert IC Size
  • 9.525 mm (5)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.375 in (5)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 8.875 mm (1)
  • 8.951 mm (1)
  • 9.0 mm (1)
  • 9.175 mm (1)
  • 9.451 mm (1)
  • 9.475 mm (5)
  • 9.875 mm (2)
  • 10.375 mm (4)
  • 10.451 mm (5)
  • 15.675 mm (58)
  • 15.775 mm (3)
  • 15.875 mm (5)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.35 in (1)
  • 0.352 in (1)
  • 0.354 in (1)
  • 0.361 in (1)
  • 0.372 in (1)
  • 0.373 in (5)
  • 0.389 in (2)
  • 0.409 in (4)
  • 0.412 in (5)
  • 0.617 in (58)
  • 0.621 in (3)
  • 0.625 in (5)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • AL (9)
  • ALP (4)
  • GE (11)
  • MH (3)
  • ML (4)
  • MM (4)
  • MR (3)
Cutting Tool Material
Cutting Tool Material
  • H T (3)
  • H W (86)
Tolerance Class
Tolerance Class
  • H (73)
  • M (2)
  • N (14)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (15)
  • SCREW-ON (6)
  • SHELL MILL (10)
Back-End Diameter
Back-End Diameter
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 22.0 mm (5)
  • 24.375 mm (1)
  • 25.0 mm (3)
  • 25.401 mm (2)
  • 27.0 mm (1)
  • 28.0 mm (3)
  • 31.75 mm (1)
  • 32.0 mm (6)
  • 40.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.866 in (5)
  • 0.96 in (1)
  • 0.984 in (3)
  • 1.0 in (2)
  • 1.063 in (1)
  • 1.102 in (3)
  • 1.25 in (1)
  • 1.26 in (6)
  • 1.575 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

Product data

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?