VSM17 Series

フィルタを選択
Filters
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (12)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (12)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (12)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (12)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (12)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (12)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (12)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (12)
  • M Stainless Steel (12)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (12)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (12)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (12)
  • K Cast Iron (12)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (12)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (12)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (12)
  • N Non-Ferrous Materials (12)
    • N1
      Wrought Aluminum (12)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (12)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (12)
  • S High-Temp Alloys (12)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (12)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (12)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (12)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (12)
  • H Hardened Materials (12)
    • H1
      Hardened Materials 44-48 HRC (12)
Applications
Applications
  • Face Milling Face Milling (12)
  • Pocket Pocket (2)
  • Pocket Helical Pocket Helical (2)
  • Pocket Milling Pocket Milling (2)
  • Profile Milling Profile Milling (2)
  • Ramping Ramping (2)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (2)
  • Shoulder Milling Shoulder Milling (12)
  • Shoulder Roughing Shoulder Roughing (12)
  • Shoulder Square End Shoulder Square End (2)
  • Slot Milling Slot Milling (6)
  • Slot Side Slot Side (2)
  • Slot Square End Slot Square End (6)
Cutting Diameter
Cutting Diameter
  • 1.969 in (2)
  • 2.0 in (4)
  • 2.48 in (2)
  • 2.5 in (2)
  • 3.0 in (1)
  • 3.15 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 50.0 mm (2)
  • 50.801 mm (4)
  • 63.0 mm (2)
  • 63.5 mm (2)
  • 76.2 mm (1)
  • 80.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 60.401 mm (5)
  • 74.2 mm (1)
  • 75.0 mm (5)
  • 104.601 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 2.378 in (5)
  • 2.922 in (1)
  • 2.953 in (5)
  • 4.118 in (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 3.346 in (2)
  • 3.5 in (3)
  • 3.938 in (3)
  • 4.0 in (3)
  • 5.5 in (1)
Reach Min to Reach Max
Reach
Reach
  • 85.0 mm (2)
  • 88.9 mm (3)
  • 100.0 mm (3)
  • 101.601 mm (3)
  • 139.701 mm (1)
Reach Min to Reach Max
Number of Flutes
Number of Flutes
  • 4 (6)
  • 5 (6)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (12)
  • 2.0 (12)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 3.346 in (2)
  • 3.5 in (3)
  • 3.938 in (3)
  • 4.0 in (3)
  • 5.5 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 85.0 mm (2)
  • 88.9 mm (3)
  • 100.0 mm (3)
  • 101.601 mm (3)
  • 139.701 mm (1)
Over All Length [L] Min to Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.016 in (12)
  • 0.031 in (12)
  • 0.047 in (12)
  • 0.063 in (12)
  • 0.079 in (12)
  • 0.095 in (12)
  • 0.126 in (12)
  • 0.157 in (12)
  • 0.237 in (12)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (12)
  • 0.8 mm (12)
  • 1.201 mm (12)
  • 1.6 mm (12)
  • 2.0 mm (12)
  • 2.401 mm (12)
  • 3.2 mm (12)
  • 4.0 mm (12)
  • 6.0 mm (12)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WK15CM (12)
  • WK15PM (12)
  • WN10HM (12)
  • WN25PM (12)
  • WP25PM (12)
  • WP35CM (12)
  • WP40PM (12)
  • WS40PM (12)
  • WU20PM (12)
  • WU35PM (12)
Maximum Ramp Angle
Maximum Ramp Angle
  • 1.6 (1)
  • 1.7 (1)
  • 2.1 (4)
  • 2.8 (4)
  • 3.0 (2)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
backEnd
Back-End Diameter
Back-End Diameter
  • 19.05 mm (2)
  • 22.0 mm (2)
  • 25.401 mm (4)
  • 27.0 mm (2)
  • 31.75 mm (1)
  • 32.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (2)
  • 0.866 in (2)
  • 1.0 in (4)
  • 1.063 in (2)
  • 1.25 in (1)
  • 1.26 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

Product data

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?