eBore™ ブリッジ

フィルタを選択
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (2)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(2)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(2)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(2)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(2)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(2)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(2)
    • M Stainless Steel (2)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
    • K Cast Iron (2)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(2)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(2)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(2)
    • N Non-Ferrous Materials (2)
      • N1
        Wrought Aluminum (2)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(2)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
      • N6
        Carbon, Graphite Composites, CFRP (2)
      • N7
        MMC's (2)
    • S High-Temp Alloys (2)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(2)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(2)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(2)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(2)
    • H Hardened Materials (2)
      • H1
        Hardened Materials 44-48 HRC(2)
      • H2
        Hardened Materials 48-55 HRC(2)
      • H3
        Hardened Materials 56-60 HRC(2)
      • H4
        Hardened Materials >60 HRC(2)
    • C CFRP Materials (2)
      • C1
        CFRP, CFRP / CFRP (2)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (2)
    Applications
    Applications
    • Blind & Cross Hole FinishingBlind & Cross Hole Finishing (11)
    • Blind Hole FinishingBlind Hole Finishing (11)
    • Through & Cross Hole FinishingThrough & Cross Hole Finishing (11)
    • Through Hole FinishingThrough Hole Finishing (11)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (2)
    • Lightly Interrupted Cut (2)
    • Smooth Cut (2)
    • Varying Depth of Cut (2)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (1)
    • 91.0 (1)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.592 in(1)
    • 1.205 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 15.025 mm(1)
    • 30.6 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(1)
    • 0.001 in(1)
    • 0.002 in(1)
    • 0.004 in(2)
    • 0.008 in(2)
    • 0.016 in(2)
    • 0.031 in(2)
    • 0.047 in(2)
    • 0.063 in(1)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(1)
    • 0.025 mm(1)
    • 0.05 mm(1)
    • 0.1 mm(2)
    • 0.2 mm(2)
    • 0.4 mm(2)
    • 0.8 mm(2)
    • 1.201 mm(2)
    • 1.6 mm(1)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(2)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(2)
    Corner Chamfer MintoCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • HCK10 (2)
    • HK1500 (1)
    • HK35 (1)
    • HT2 (2)
    • HTX (2)
    • HWK15 (2)
    • K10M (1)
    • K10P (1)
    • K10U (1)
    • K15U (1)
    • K20K (1)
    • K313 (2)
    • K68 (2)
    • KB1345 (2)
    • KB1610 (1)
    • KB1630 (2)
    • KB5610 (1)
    • KB5625 (1)
    • KB5630 (1)
    • KB9610 (1)
    • KBH10 (1)
    • KBH20 (2)
    • KC5010 (2)
    • KC5025 (2)
    • KC5410 (2)
    • KC720 (2)
    • KC730 (2)
    • KC732 (2)
    • KC8050 (2)
    • KC810 (2)
    • KC850 (2)
    • KC9010 (1)
    • KC9025 (2)
    • KC910 (2)
    • KC9105 (2)
    • KC9110 (2)
    • KC9120 (1)
    • KC9125 (2)
    • KC9225 (2)
    • KC9240 (2)
    • KC9240NEW (2)
    • KC9315 (2)
    • KC9320 (2)
    • KC9325 (2)
    • KC935 (2)
    • KC950 (1)
    • KC990 (1)
    • KCD25 (2)
    • KCK05 (2)
    • KCK05B (1)
    • KCK15 (2)
    • KCK15B (2)
    • KCK20 (2)
    • KCK20B (2)
    • KCM15 (2)
    • KCM15B (2)
    • KCM25 (2)
    • KCM25B (2)
    • KCM25S (1)
    • KCM35 (2)
    • KCM35B (1)
    • KCP05 (2)
    • KCP05B (1)
    • KCP10 (2)
    • KCP10B (2)
    • KCP20S (1)
    • KCP25 (2)
    • KCP25B (2)
    • KCP25C (2)
    • KCP30 (2)
    • KCP30B (2)
    • KCS10 (2)
    • KCS10B (2)
    • KCS25S (1)
    • KCU10 (2)
    • KCU10B (2)
    • KCU25 (2)
    • KCU25B (2)
    • KD050 (1)
    • KD081 (1)
    • KD1400 (1)
    • KD1425 (1)
    • KN10S (1)
    • KT175 (1)
    • KT315 (2)
    • KT325 (2)
    • KTP10 (1)
    • KTP25S (1)
    • KU10 (1)
    • KU10T (2)
    • KU30T (2)
    • NL300 (1)
    • NL920 (1)
    • PB170 (1)
    • PB250 (1)
    • PD100 (2)
    • PD50 (1)
    • SP0PW3 (1)
    • SP4019 (1)
    • SPN3W1 (1)
    • THM (2)
    • THM-X (2)
    • TN10P (2)
    • TN10U (2)
    • TN15M (2)
    • TN15U (1)
    • TN2000 (2)
    • TN20K (2)
    • TN20P (2)
    • TN30M (2)
    • TN4000 (1)
    • TN5015 (2)
    • TN5020 (2)
    • TN5105 (2)
    • TN5120 (2)
    • TN6010 (2)
    • TN6025 (1)
    • TN7005 (1)
    • TN7010 (2)
    • TN7015 (2)
    • TN7025 (2)
    • TN7035 (2)
    • TN7105 (2)
    • TN7110 (2)
    • TN7115 (2)
    • TN7125 (2)
    • TN7135 (2)
    • TN8025 (2)
    • TTI15 (1)
    • TTM (1)
    • TTR (2)
    • TTS (1)
    • TTX (1)
    • W00342 (1)
    • WBH10C (1)
    • WBH10P (1)
    • WBH10U (1)
    • WBH20P (2)
    • WBH25P (1)
    • WBH30P (1)
    • WBK45U (2)
    • WDN00U (1)
    • WDN25U (1)
    • WK05CT (2)
    • WK15CT (2)
    • WK20CT (2)
    • WM15CT (2)
    • WM25CT (2)
    • WP15CT (2)
    • WP25CT (2)
    • WP35CT (2)
    • WS10PT (2)
    • WS25PT (1)
    • WU05PT (2)
    • WU10HT (2)
    • WU10PT (2)
    • WU25PT (2)
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 200.0 mm(2)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 7.875 in(2)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 40.158 in(2)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 1020.0 mm(2)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    frontEnd
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (2)
    Gage Length
    Gage Length
    • 0.576 in(1)
    • 1.161 in(1)
    • 1.772 in(1)
    • 3.346 in(4)
    • 4.331 in(2)
    Gage Length
    Gage Length
    • 85 mm(4)
    • 110 mm(2)
    • 45 mm(1)
    • 14.601 mm(1)
    • 29.5 mm(1)
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (2)
    • B L (2)
    • C N (1)
    • D P (2)
    • H T (2)
    • H W (2)
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 60.0 mm(6)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 2.362 in(6)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    マイソリューションページにを追加しようとしています. 続行しますか?
    Select the destination where you want to move to.
    新規 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO製品型番材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?