提案製品

Product Family suggestions

がカートに正常に追加されました
カートを表示

通知

すべて既読にする
Mobile Menu

VariDrillTM

多種多様な被削材のドリル加工において、期待を上回る信頼性の高い超硬ソリッドドリルです。 ​

この超硬ソリッドドリルは、切れ刃の欠損が少ないため、あらゆる被削材で安定した工具寿命を得ることができます。このドリル形状により、切り屑がスムーズに転がり、排出されやすくなるため、摩擦、発熱、詰まり、ひっかき傷などが大幅に減少します。

VariDrillはオールスターの工具です。 

オールスターで即日発送の工具を注文する 詳細を確認する

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1280)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1280)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1280)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1280)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1280)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1280)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1280)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1280)
  • M Stainless Steel (1280)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1280)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1280)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1280)
  • K Cast Iron (1280)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1280)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1280)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1280)
  • N Non-Ferrous Materials (1280)
    • N1
      Wrought Aluminum
      (1280)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1280)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1280)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1280)
  • S High-Temp Alloys (1280)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1280)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1280)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1280)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1280)
Select All Star
  • CN (199)
  • DE (795)
  • GB (457)
  • IN (123)
  • SG (850)
  • US (488)
Applications
Applications
  • Drilling Drilling (1280)
  • Stacked Plates Drilling Stacked Plates Drilling (1238)
Cutting Diameter
Cutting Diameter
  • 0.044 in (5)
  • 0.047 in (6)
  • 0.055 in (6)
  • 0.06 in (5)
  • 0.063 in (5)
  • 0.067 in (5)
  • 0.072 in (5)
  • 0.075 in (5)
  • 0.078 in (5)
  • 0.079 in (5)
  • 0.083 in (5)
  • 0.088 in (5)
  • 0.091 in (5)
  • 0.094 in (5)
  • 0.095 in (5)
  • 0.096 in (5)
  • 0.098 in (10)
  • 0.101 in (5)
  • 0.103 in (5)
  • 0.105 in (5)
  • 0.106 in (10)
  • 0.109 in (5)
  • 0.11 in (5)
  • 0.111 in (5)
  • 0.113 in (5)
  • 0.114 in (5)
  • 0.116 in (5)
  • 0.119 in (5)
  • 0.12 in (5)
  • 0.122 in (5)
  • 0.125 in (5)
  • 0.126 in (5)
  • 0.129 in (5)
  • 0.13 in (5)
  • 0.134 in (5)
  • 0.136 in (5)
  • 0.138 in (5)
  • 0.142 in (5)
  • 0.143 in (5)
  • 0.145 in (5)
  • 0.146 in (5)
  • 0.147 in (5)
  • 0.15 in (5)
  • 0.154 in (5)
  • 0.156 in (5)
  • 0.157 in (5)
  • 0.159 in (5)
  • 0.161 in (10)
  • 0.165 in (5)
  • 0.166 in (5)
  • 0.169 in (5)
  • 0.173 in (5)
  • 0.174 in (5)
  • 0.177 in (5)
  • 0.181 in (5)
  • 0.182 in (5)
  • 0.185 in (5)
  • 0.188 in (5)
  • 0.189 in (5)
  • 0.191 in (5)
  • 0.193 in (5)
  • 0.197 in (5)
  • 0.201 in (10)
  • 0.203 in (5)
  • 0.206 in (5)
  • 0.209 in (5)
  • 0.213 in (10)
  • 0.217 in (5)
  • 0.219 in (5)
  • 0.221 in (10)
  • 0.224 in (5)
  • 0.228 in (5)
  • 0.232 in (5)
  • 0.234 in (5)
  • 0.237 in (5)
  • 0.24 in (5)
  • 0.244 in (5)
  • 0.248 in (5)
  • 0.25 in (5)
  • 0.252 in (5)
  • 0.256 in (5)
  • 0.257 in (5)
  • 0.26 in (5)
  • 0.261 in (5)
  • 0.264 in (5)
  • 0.266 in (5)
  • 0.268 in (5)
  • 0.272 in (5)
  • 0.276 in (5)
  • 0.28 in (5)
  • 0.281 in (5)
  • 0.284 in (5)
  • 0.288 in (5)
  • 0.291 in (5)
  • 0.453 in (10)
  • 0.47 in (10)
  • 0.484 in (10)
  • 0.516 in (10)
  • 0.547 in (9)
  • 0.564 in (10)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 1.1 mm (5)
  • 1.201 mm (6)
  • 1.401 mm (6)
  • 1.5 mm (5)
  • 1.6 mm (5)
  • 1.701 mm (5)
  • 1.8 mm (5)
  • 1.901 mm (5)
  • 1.975 mm (5)
  • 2.0 mm (5)
  • 2.1 mm (5)
  • 2.2 mm (5)
  • 2.301 mm (5)
  • 2.375 mm (5)
  • 2.401 mm (5)
  • 2.45 mm (5)
  • 2.5 mm (10)
  • 2.575 mm (5)
  • 2.6 mm (5)
  • 2.651 mm (5)
  • 2.7 mm (10)
  • 2.776 mm (5)
  • 2.801 mm (5)
  • 2.825 mm (5)
  • 2.875 mm (5)
  • 2.901 mm (5)
  • 2.95 mm (5)
  • 3.0 mm (5)
  • 3.051 mm (5)
  • 3.1 mm (5)
  • 3.176 mm (5)
  • 3.2 mm (5)
  • 3.276 mm (5)
  • 3.301 mm (5)
  • 3.401 mm (5)
  • 3.45 mm (5)
  • 3.5 mm (5)
  • 3.575 mm (5)
  • 3.6 mm (5)
  • 3.651 mm (5)
  • 3.7 mm (5)
  • 3.725 mm (5)
  • 3.801 mm (5)
  • 3.901 mm (5)
  • 3.975 mm (5)
  • 4.0 mm (5)
  • 4.05 mm (5)
  • 4.101 mm (10)
  • 4.2 mm (5)
  • 4.226 mm (5)
  • 4.3 mm (5)
  • 4.375 mm (5)
  • 4.4 mm (5)
  • 4.5 mm (5)
  • 4.601 mm (5)
  • 4.625 mm (5)
  • 4.7 mm (5)
  • 4.775 mm (5)
  • 4.801 mm (5)
  • 4.851 mm (5)
  • 4.9 mm (5)
  • 5.0 mm (5)
  • 5.101 mm (10)
  • 5.15 mm (5)
  • 5.2 mm (5)
  • 5.301 mm (5)
  • 5.4 mm (10)
  • 5.5 mm (5)
  • 5.551 mm (5)
  • 5.601 mm (5)
  • 5.625 mm (5)
  • 5.7 mm (5)
  • 5.801 mm (5)
  • 5.9 mm (5)
  • 5.95 mm (5)
  • 6.0 mm (5)
  • 6.101 mm (5)
  • 6.2 mm (5)
  • 6.301 mm (5)
  • 6.351 mm (5)
  • 6.4 mm (5)
  • 6.5 mm (5)
  • 6.525 mm (5)
  • 6.601 mm (5)
  • 6.625 mm (5)
  • 6.7 mm (5)
  • 6.75 mm (5)
  • 6.801 mm (5)
  • 6.9 mm (5)
  • 7.0 mm (5)
  • 7.101 mm (5)
  • 7.15 mm (5)
  • 7.2 mm (5)
  • 7.301 mm (5)
  • 11.5 mm (10)
  • 11.9 mm (10)
  • 12.3 mm (10)
  • 13.101 mm (10)
  • 13.9 mm (9)
  • 14.3 mm (10)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 5.0 mm (13)
  • 6.0 mm (23)
  • 9.0 mm (10)
  • 10.0 mm (21)
  • 12.0 mm (32)
  • 14.0 mm (40)
  • 15.0 mm (5)
  • 17.0 mm (64)
  • 20.0 mm (42)
  • 22.0 mm (5)
  • 23.0 mm (30)
  • 24.0 mm (28)
  • 25.0 mm (16)
  • 29.0 mm (58)
  • 33.0 mm (15)
  • 35.0 mm (96)
  • 40.0 mm (50)
  • 41.0 mm (16)
  • 43.0 mm (99)
  • 45.0 mm (50)
  • 48.0 mm (21)
  • 49.0 mm (54)
  • 51.0 mm (46)
  • 55.0 mm (46)
  • 56.0 mm (50)
  • 57.0 mm (14)
  • 60.0 mm (46)
  • 63.0 mm (50)
  • 64.0 mm (13)
  • 68.0 mm (1)
  • 71.0 mm (43)
  • 77.0 mm (39)
  • 80.0 mm (26)
  • 96.0 mm (25)
  • 112.0 mm (23)
  • 128.0 mm (25)
  • 144.0 mm (22)
  • 160.0 mm (23)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.197 in (13)
  • 0.237 in (23)
  • 0.354 in (10)
  • 0.394 in (21)
  • 0.473 in (32)
  • 0.551 in (40)
  • 0.591 in (5)
  • 0.669 in (64)
  • 0.787 in (42)
  • 0.866 in (5)
  • 0.906 in (30)
  • 0.946 in (28)
  • 0.984 in (16)
  • 1.143 in (58)
  • 1.299 in (15)
  • 1.379 in (96)
  • 1.575 in (50)
  • 1.614 in (16)
  • 1.693 in (99)
  • 1.772 in (50)
  • 1.891 in (21)
  • 1.929 in (54)
  • 2.008 in (46)
  • 2.165 in (46)
  • 2.205 in (50)
  • 2.244 in (14)
  • 2.362 in (46)
  • 2.48 in (50)
  • 2.52 in (13)
  • 2.677 in (1)
  • 2.795 in (43)
  • 3.031 in (39)
  • 3.15 in (26)
  • 3.781 in (25)
  • 4.409 in (23)
  • 5.039 in (25)
  • 5.67 in (22)
  • 6.299 in (23)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.276 in (13)
  • 0.354 in (23)
  • 0.473 in (21)
  • 0.512 in (10)
  • 0.669 in (32)
  • 0.709 in (15)
  • 0.787 in (30)
  • 0.866 in (32)
  • 0.946 in (32)
  • 1.024 in (5)
  • 1.102 in (72)
  • 1.181 in (16)
  • 1.339 in (28)
  • 1.417 in (32)
  • 1.575 in (15)
  • 1.614 in (26)
  • 1.732 in (42)
  • 1.85 in (54)
  • 1.929 in (16)
  • 2.087 in (54)
  • 2.165 in (50)
  • 2.205 in (21)
  • 2.362 in (45)
  • 2.402 in (54)
  • 2.559 in (50)
  • 2.638 in (14)
  • 2.795 in (50)
  • 2.874 in (46)
  • 2.914 in (13)
  • 3.031 in (46)
  • 3.11 in (46)
  • 3.15 in (1)
  • 3.269 in (50)
  • 3.622 in (26)
  • 3.661 in (43)
  • 3.976 in (39)
  • 4.331 in (25)
  • 5.039 in (23)
  • 5.748 in (25)
  • 6.417 in (22)
  • 7.126 in (23)
Reach Min to Reach Max
Reach
Reach
  • 7.0 mm (13)
  • 9.0 mm (23)
  • 12.0 mm (21)
  • 13.0 mm (10)
  • 17.0 mm (32)
  • 18.0 mm (15)
  • 20.0 mm (30)
  • 22.0 mm (32)
  • 24.0 mm (32)
  • 26.0 mm (5)
  • 28.0 mm (72)
  • 30.0 mm (16)
  • 34.0 mm (28)
  • 36.0 mm (32)
  • 40.0 mm (15)
  • 41.0 mm (26)
  • 44.0 mm (42)
  • 47.0 mm (54)
  • 49.0 mm (16)
  • 53.0 mm (54)
  • 55.0 mm (50)
  • 56.0 mm (21)
  • 60.0 mm (45)
  • 61.0 mm (54)
  • 65.0 mm (50)
  • 67.0 mm (14)
  • 71.0 mm (50)
  • 73.0 mm (46)
  • 74.0 mm (13)
  • 77.0 mm (46)
  • 79.0 mm (46)
  • 80.0 mm (1)
  • 83.0 mm (50)
  • 92.0 mm (26)
  • 93.0 mm (43)
  • 101.0 mm (39)
  • 110.0 mm (25)
  • 128.0 mm (23)
  • 146.0 mm (25)
  • 163.0 mm (22)
  • 181.0 mm (23)
Reach Min to Reach Max
Internal Coolant Capability
Internal Coolant Capability
backEnd
Back-End Diameter
Back-End Diameter
  • 4.0 mm (167)
  • 6.0 mm (260)
  • 8.0 mm (135)
  • 10.0 mm (135)
  • 12.0 mm (125)
  • 14.0 mm (114)
  • 16.0 mm (125)
  • 18.0 mm (111)
  • 20.0 mm (108)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.157 in (167)
  • 0.237 in (260)
  • 0.315 in (135)
  • 0.394 in (135)
  • 0.473 in (125)
  • 0.551 in (114)
  • 0.63 in (125)
  • 0.709 in (111)
  • 0.787 in (108)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

VariDrill™ • 8 x D • VDS403A • Aシャンク VariDrill™ • 8 x D • VDS403A • Aシャンク

VDS403A • 8 x D
(261 Products)
  • DrillingDrilling
  • 穴あけ深さ：8x穴あけ深さ：8x
  • シャンク — ストレート プレーン ≤h6シャンク — ストレート プレーン ≤h6
  • ねじれ角： 30°ねじれ角： 30°
  • 3855038550
  • Through Coolant: Radial: DrillingThrough Coolant: Radial: Drilling
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter M [D1] Drill Diameter M [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L3] Flute Length [L3] Flute Length [L5] Drill Point Length [L5] Drill Point Length [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
4143700 VDS403A01500 VDS403A01500 WU25PD   1.5000 .0591 15.0000 .5906 18.0000 .7087 0.2290 .0090 58.0000 2.283 28.0 1.102 4.0 .1575
    定価:
    $120,46 /各.
    価格::
    4143701 VDS403A01600 VDS403A01600 WU25PD   1.6000 .0630 15.0000 .5906 18.0000 .7087 0.2460 .0097 58.0000 2.283 28.0 1.102 4.0 .1575
      定価:
      $120,46 /各.
      価格::
      4143702 VDS403A01700 VDS403A01700 WU25PD   1.7000 .0669 15.0000 .5906 18.0000 .7087 0.2600 .0102 58.0000 2.283 28.0 1.102 4.0 .1575
        定価:
        $120,46 /各.
        価格::
        4144250 VDS403A18500 VDS403A18500 WU25PD   18.5000 .7283 160.0000 6.299 181.0000 7.126 3.2100 .1264 234.0000 9.212 50.0 1.968 20.0 .7874
          定価:
          $743,44 /各.
          価格::
          4144262 VDS403A19000 VDS403A19000 WU25PD   19.0000 .7480 160.0000 6.299 181.0000 7.126 3.3000 .1299 234.0000 9.212 50.0 1.968 20.0 .7874
            定価:
            $743,44 /各.
            価格::
            4144305 VDS403A20000 VDS403A20000 WU25PD   20.0000 .7874 160.0000 6.299 181.0000 7.126 3.4800 .1370 234.0000 9.212 50.0 1.968 20.0 .7874
              定価:
              $800,81 /各.
              価格::
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります

              オリジナル製品

              VariDrill™ • 3 x D • VDS201A／VDS401A • Aシャンク VariDrill™ • 3 x D • VDS201A／VDS401A • Aシャンク

              VDS201A • VDS401A • 3 x D
              (514 Products)
              • DrillingDrilling
              • 穴あけ深さ：3x穴あけ深さ：3x
              • シャンク — ストレート プレーン ≤h6シャンク — ストレート プレーン ≤h6
              • ねじれ角： 30°ねじれ角： 30°
              • 3856338563
              • 3855038550
              • Through Coolant: Radial: DrillingThrough Coolant: Radial: Drilling
              • フラッドクーラント：ドリル加工フラッドクーラント：ドリル加工
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Drill Diameter M [D1] Drill Diameter M [D1] Wire Size [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L3] Flute Length [L3] Flute Length [L5] Drill Point Length [L5] Drill Point Length [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
              4143907 VDS201A03000 VDS201A03000 WU25PD   Straight-Cylindrical 3.0000 .1181   14.0000 .5512 20.0000 .7874 0.4800 .0189 62.0000 2.440 36.0 1.417 6.0 .2362
                定価:
                $45,37 /各.
                価格::
                4143908 VDS201A03048 VDS201A03048 WU25PD   Straight-Cylindrical 3.0480 .1200 31 14.0000 .5500 20.0000 .7900 0.4900 .0190 62.0000 2.440 36.0 1.42 6.0 .2362
                  定価:
                  $46,18 /各.
                  価格::
                  4143909 VDS201A03100 VDS201A03100 WU25PD   Straight-Cylindrical 3.1000 .1220   14.0000 .5512 20.0000 .7874 0.5000 .0197 62.0000 2.440 36.0 1.417 6.0 .2362
                    定価:
                    $46,18 /各.
                    価格::
                    4143910 VDS201A03175 VDS201A03175 WU25PD   Straight-Cylindrical 3.1750 .1250   14.0000 .5500 20.0000 .7900 0.5100 .0200 62.0000 2.440 36.0 1.42 6.0 .2362
                      定価:
                      $46,18 /各.
                      価格::
                      4143911 VDS201A03200 VDS201A03200 WU25PD   Straight-Cylindrical 3.2000 .1260   14.0000 .5512 20.0000 .7874 0.5200 .0205 62.0000 2.440 36.0 1.417 6.0 .2362
                        定価:
                        $46,18 /各.
                        価格::
                        4143912 VDS201A03264 VDS201A03264 WU25PD   Straight-Cylindrical 3.2640 .1285 30 14.0000 .5512 20.0000 .7874 0.5300 .0209 62.0000 2.440 36.0 1.417 6.0 .2362
                          定価:
                          $46,18 /各.
                          価格::
                          定価:
                          割引: %
                          価格::
                          配置転換 この品目はありません
                          交換品 この品目は、代理店経由で入手できる場合があります

                          オリジナル製品

                          VariDrill™ • 5 x D • VDS202A／VDS402A • Aシャンク VariDrill™ • 5 x D • VDS202A／VDS402A • Aシャンク

                          VDS202A • VDS402A • 5 x D
                          (505 Products)
                          • DrillingDrilling
                          • 穴あけ深さ：5x穴あけ深さ：5x
                          • シャンク — ストレート プレーン ≤h6シャンク — ストレート プレーン ≤h6
                          • ねじれ角： 30°ねじれ角： 30°
                          • 3856338563
                          • 3855038550
                          • Through Coolant: Radial: DrillingThrough Coolant: Radial: Drilling
                          • フラッドクーラント：ドリル加工フラッドクーラント：ドリル加工
                          製品を表示
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Adapter Style Machine Side [D1] Drill Diameter M [D1] Drill Diameter M [L4] Maximum Drilling Depth [L4] Maximum Drilling Depth [L3] Flute Length [L3] Flute Length [L5] Drill Point Length [L5] Drill Point Length [L] Overall Length [L] Overall Length [LS] Shank Length [LS] Shank Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter
                          4142847 VDS402A03100 VDS402A03100 WU25PD   Straight-Cylindrical 3.1000 .1220 23.0000 .9100 28.0000 1.100 0.5000 .0200 66.0000 2.600 36.0 1.42 6.0 .2362
                            定価:
                            $78,02 /各.
                            価格::
                            4142849 VDS402A03175