トップドリルフラット

フィルタを選択
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (5)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (5)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (5)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (5)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (5)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (5)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (5)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (5)
  • M Stainless Steel (5)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (5)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (5)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (5)
  • K Cast Iron (5)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (5)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (5)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (5)
  • N Non-Ferrous Materials (3)
    • N1
      Wrought Aluminum (3)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (3)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (3)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
  • S High-Temp Alloys (5)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (5)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (5)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (5)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (5)
Applications
Applications
  • Convex Drilling Convex Drilling (2)
  • Corner Style SquareEnd Drilling Corner Style SquareEnd Drilling (2)
  • CornerStyle Chamfer Drilling CornerStyle Chamfer Drilling (2)
  • Counterboring Counterboring (2)
  • Countersinking Countersinking (2)
  • Cross Hole Drilling Cross Hole Drilling (2)
  • Drilling Drilling (2)
  • Flat Bottom Drilling Flat Bottom Drilling (2)
  • Inclined Entry Drilling Inclined Entry Drilling (2)
  • Inclined Exit Drilling Inclined Exit Drilling (2)
Cutting Diameter
Cutting Diameter
  • 0.157 in (1)
  • 0.237 in (1)
  • 0.473 in (1)
  • 0.551 in (1)
  • 0.63 in (2)
  • 0.709 in (1)
  • 0.787 in (1)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 4.0 mm (1)
  • 6.0 mm (1)
  • 12.0 mm (1)
  • 14.0 mm (1)
  • 16.0 mm (2)
  • 18.0 mm (1)
  • 20.0 mm (1)
Cutting Diameter Min to Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 17.0 mm (1)
  • 20.0 mm (1)
  • 40.0 mm (1)
  • 43.0 mm (1)
  • 45.0 mm (2)
  • 51.0 mm (1)
  • 55.0 mm (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 0.669 in (1)
  • 0.787 in (1)
  • 1.575 in (1)
  • 1.693 in (1)
  • 1.772 in (2)
  • 2.008 in (1)
  • 2.165 in (1)
Maximum Hole Depth [L4] Min to Maximum Hole Depth [L4] Max
Reach
Reach
  • 0.946 in (1)
  • 1.102 in (1)
  • 2.165 in (1)
  • 2.362 in (1)
  • 2.559 in (2)
  • 2.874 in (1)
  • 3.11 in (1)
Reach Min to Reach Max
Reach
Reach
  • 24.0 mm (1)
  • 28.0 mm (1)
  • 55.0 mm (1)
  • 60.0 mm (1)
  • 65.0 mm (2)
  • 73.0 mm (1)
  • 79.0 mm (1)
Reach Min to Reach Max
Over All Length [L]
Over All Length [L]
  • 2.598 in (2)
  • 4.016 in (1)
  • 4.213 in (1)
  • 4.529 in (2)
  • 4.843 in (1)
  • 5.157 in (1)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 66.0 mm (2)
  • 102.0 mm (1)
  • 107.0 mm (1)
  • 115.0 mm (2)
  • 123.0 mm (1)
  • 131.0 mm (1)
Over All Length [L] Min to Over All Length [L] Max
application
Coating
Coating
  • TiAlN (5)
  • Uncoated (3)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WN15HD (3)
  • WU20PD (5)
backEnd
Back-End Diameter
Back-End Diameter
  • 6.0 mm (2)
  • 12.0 mm (1)
  • 14.0 mm (1)
  • 16.0 mm (2)
  • 18.0 mm (1)
  • 20.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.237 in (2)
  • 0.473 in (1)
  • 0.551 in (1)
  • 0.63 in (2)
  • 0.709 in (1)
  • 0.787 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?