通知

すべて既読にする

M95シリーズ

フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (22)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (22)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (22)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (22)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (20)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (20)
  • M Stainless Steel (20)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (20)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (20)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (20)
  • K Cast Iron (19)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (19)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (19)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (19)
  • N Non-Ferrous Materials (14)
    • N1
      Wrought Aluminum
      (14)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (14)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (14)
  • S High-Temp Alloys (20)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (16)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (16)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (16)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (20)
Applications
Applications
  • Slot Milling Slot Milling (14)
  • Slot Side Slot Side (14)
Cutting Diameter
Cutting Diameter
  • 3.938 in (4)
  • 4.921 in (4)
  • 6.299 in (4)
  • 7.875 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 100.0 mm (4)
  • 125.0 mm (4)
  • 160.0 mm (4)
  • 200.0 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 4.0 mm (2)
  • 6.0 mm (2)
  • 7.0 mm (3)
  • 8.0 mm (4)
  • 10.0 mm (3)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.157 in (2)
  • 0.237 in (2)
  • 0.276 in (3)
  • 0.315 in (4)
  • 0.394 in (3)
Cutting Length Min to Cutting Length Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (14)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • 2 Key & Cutter Retention Screw (14)
Number of Flutes
Number of Flutes
  • 3 (2)
  • 4 (2)
  • 5 (3)
  • 6 (4)
  • 8 (1)
  • 9 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 4.0 (25)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (25)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (25)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.151 mm (25)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.006 in (25)
Corner Chamfer Min to Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (14)
  • TN5515 (3)
  • TN7525 (12)
  • TTM09 (14)
  • TTR (12)
  • WK15CM (13)
  • WP35CM (16)
  • WP40PM (16)
Hand Of Tool
Hand Of Tool
  • N (14)
Wiper Insert
Wiper Insert
  • N (13)
frontEnd
Cutting Width
Cutting Width
  • 0.157 in (2)
  • 0.237 in (2)
  • 0.276 in (3)
  • 0.315 in (4)
  • 0.394 in (3)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 4.0 mm (2)
  • 6.0 mm (2)
  • 7.0 mm (3)
  • 8.0 mm (4)
  • 10.0 mm (3)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • S-SQUARE ON EDGE 90 (25)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.984 in (4)
  • 1.28 in (4)
  • 1.772 in (4)
  • 2.48 in (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 25.0 mm (4)
  • 32.5 mm (4)
  • 45.0 mm (4)
  • 63.0 mm (2)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
insertGeometry
Shape
Shape
  • S-SQUARE ON EDGE 90 (13)
Insert IC Size
Insert IC Size
  • 11.0 mm (5)
  • 12.701 mm (8)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.433 in (5)
  • 0.5 in (8)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 11.0 mm (5)
  • 12.701 mm (8)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.433 in (5)
  • 0.5 in (8)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Tool Material
Cutting Tool Material
  • H W (13)
Tolerance Class
Tolerance Class
  • H (13)
backEnd
Connection Type
Connection Type
  • ARBOR (14)
Back-End Diameter
Back-End Diameter
  • 27.0 mm (4)
  • 40.0 mm (8)
  • 50.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 1.063 in (4)
  • 1.575 in (8)
  • 1.969 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
カテゴリで絞り込む:
製品を表示
メートル
インチ

オリジナル製品

Slotting Mills • M95 Series

Arbour Mount
(14 Products)
  • 溝加工:側面溝加工:側面
  • 溝加工:AE/AP寸法付き側面溝加工:AE/AP寸法付き側面
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [BM] Cutting Width Minimum [BM] Cutting Width Minimum [CDX] Radial Maximum Depth of Cut [CDX] Radial Maximum Depth of Cut [THUB] Hub Thickness [THUB] Hub Thickness Number of Inserts Number of Effective Cutting Edges on Face Coolant Supply Gage Insert Weight Kilograms
2016502 12299510400 12299510400 W 100.0000   27.0 1.063 48.0000 1.889 4.0000 .1575 25.0000 .9843 12.0000 .4724 12 6 N 123506599 0.30
    定価:
    $1.364,87 /各.
    価格::
    数量
    2016516 12299515600 12299515600 W 100.0000 3.937 27.0 1.063 48.0000 1.889 6.0000 .2360 25.0000 .9843 12.0000 .4724 10 5 N SNHX1203 0.28
      定価:
      $1.154,37 /各.
      価格::
      数量
      2016518 12299515700 12299515700 W 100.0000 3.937 27.0 1.063 48.0000 1.889 7.0000 .2760 25.0000 .9843 12.0000 .4724 9 3 N SNHX1203 0.30
        定価:
        $1.450,09 /各.
        価格::
        数量
        2016520 12299515800 12299515800 W 100.0000 3.937 27.0 1.063 48.0000 1.889 8.0000 .3150 25.0000 .9843 12.0000 .4724 9 3 N SNHX1203 0.35
          定価:
          $2.271,26 /各.
          価格::
          数量
          2016528 12299525600 12299525600 W 125.0000 4.921 40.0 1.574 58.0000 2.283 6.0000 .2360 32.5000 1.279 12.0000 .4724 12 6 N SNHX1203 0.41
            定価:
            $1.441,84 /各.
            価格::
            数量
            2016530 12299525700 12299525700 W 125.0000 4.921 40.0 1.574 58.0000 2.283 7.0000 .2760 32.5000 1.279 12.0000 .4724 12 4 N SNHX1203 0.47
              定価:
              $1.441,84 /各.
              価格::
              数量
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります
              数量

              販売包装単位

              オリジナル製品

              Slotting Mills • M95 Series

              Inserts
              (3 Products)
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
              2009671 123506599 123506599 THM 4 11.0000 .4331 11.0000 .4331 2.3000 .0906 0.0800 .0031
                定価:
                $17,61 /各.
                価格::
                数量
                5903672 123506599 123506599 WP35CM 4 11.0000 .4331 11.0000 .4331 2.3000 .0906 0.0800 .0031
                  定価:
                  $19,05 /各.
                  価格::
                  数量
                  5903644 123506599 123506599 WP40PM 4 11.0000 .4331 11.0000 .4331 2.3000 .0906 0.0800 .0031
                    定価:
                    $19,05 /各.
                    価格::
                    数量
                    定価:
                    割引: %
                    価格::
                    配置転換 この品目はありません
                    交換品 この品目は、代理店経由で入手できる場合があります
                    数量

                    販売包装単位

                    オリジナル製品

                    Slotting Mills • M95 Series

                    Inserts
                    (2 Products)
                    製品を表示
                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
                    5903645 123506600 123506600 WP40PM 4 11.0000 .4331 11.0000 .4330 2.7000 .1063 0.0800 .0031
                      定価:
                      $19,05 /各.
                      価格::
                      数量
                      5903673 123506600 123506600 WP35CM 4 11.0000 .4331 11.0000 .4330 2.7000 .1063 0.0800 .0031
                        定価:
                        $19,05 /各.
                        価格::
                        数量
                        定価:
                        割引: %
                        価格::
                        配置転換 この品目はありません
                        交換品 この品目は、代理店経由で入手できる場合があります
                        数量

                        販売包装単位

                        オリジナル製品

                        Slotting Mills • M95 Series

                        Inserts
                        (4 Products)
                        製品を表示
                        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
                        2021921 123506601 123506601 TTM09 4 12.7000 .5000 12.7000 .5000 3.1800 .1252 0.0800 .0031
                          定価:
                          $19,08 /各.
                          価格::
                          数量
                          5903646 123506601 123506601 WP40PM 4 12.7000 .5000 12.7000 .5000 3.1800 .1252 0.0800 .0031
                            定価:
                            $20,60 /各.
                            価格::
                            数量
                            5903650 123506601 123506601 WK15CM 4 12.7000 .5000 12.7000 .5000 3.1800 .1252 0.0800 .0031
                              定価:
                              $20,60 /各.
                              価格::
                              数量
                              5903674 123506601 123506601 WP35CM 4 12.7000 .5000 12.7000 .5000 3.1800 .1252 0.0800 .0031
                                定価:
                                $20,60 /各.
                                価格::
                                数量
                                定価:
                                割引: %
                                価格::
                                配置転換 この品目はありません
                                交換品 この品目は、代理店経由で入手できる場合があります
                                数量

                                販売包装単位

                                オリジナル製品

                                Slotting Mills • M95 Series

                                Inserts
                                (4 Products)
                                製品を表示
                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness Average Chip Thickness [HM] Average Chip Thickness [HM]
                                2021925 123506602 123506602 THM 4 12.7000 .5000 12.7000 .5000 5.4000 .2126 0.0800 .0031
                                  定価:
                                  $19,08 /各.
                                  価格::
                                  数量
                                  2021926 123506602 123506602 TTM09 4 12.7000 .5000 12.7000 .5000 5.4000 .2126 0.0800 .0031
                                    定価:
                                    $19,08 /各.
                                    価格::
                                    数量
                                    5903675 123506602 123506602 WP35CM 4 12.7000 .5000 12.7000 .5000 5.4000 .2126 0.0800 .0031
                                      定価:
                                      $20,60 /各.
                                      価格::
                                      数量
                                      5903647 123506602 123506602 WP40PM 4 12.7000 .5000 12.7000 .5000 5.4000 .2126 0.0800 .0031
                                        定価:
                                        $20,60 /各.
                                        価格::
                                        数量
                                        定価:
                                        割引: %
                                        価格::
                                        配置転換 この品目はありません
                                        交換品 この品目は、代理店経由で入手できる場合があります
                                        数量

                                        販売包装単位

                                        product-image
                                        Please adjust the following properties from

                                        ISO製品型番

                                        ANSI製品型番

                                        to find similar products.
                                        複製を作成しようとしています . 続行しますか?
                                        削除しようとしています 続行しますか?
                                        の名前を何に変更しますか?
                                        有効な名前を入力してください
                                        重複の名前を入力してください
                                        有効な名前を入力してください
                                        マイソリューションページにを追加しようとしています. 続行しますか?
                                        有効な名前を入力してください
                                        次のコピーを送信

                                        有効なメールアドレスを入力してください
                                        有効な名前を入力してください

                                        次のCAD図面が見つかりました

                                        お探しのファイルを一括して選択してダウンロードできます

                                        ダッシュボード情報を表示するには、ログインする必要があります
                                        Session expired due to inactivity, please login again
                                        カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
                                        アイテムがカートに正常に追加されました
                                        カートを表示