新製品 - MMブレーカー形状のPSTSインサート

ほとんどの粗加工と準仕上げ加工のミーリングアプリケーション向けの汎用性の高いソリューション。

  • 全体にTランドを備えた、強力な切れ刃
  • 材種はWU20PM、WK15CM、WP35CMをご用意
  • 切れ刃あたりのコストを削減

M1200

クラス最高のフェイスミーリングプラットフォームが、テーパー50のスピンドルミーリング機械と駆動工具の生産性を向上。

  • 切れ刃あたりのコストが低く、生産性の高いソリューション。
  • 1つのシリーズで、あらゆるフェイスミーリングのニーズに対応。
  • 75°、45°、31°のリード角。
  • 軽切削から重切削まで、長い工具寿命。

M1200 Mini

クラス最高のフェイスミーリングプラットフォームが、テーパー40のスピンドルミーリング機械と駆動工具の生産性を向上。

  • 切込み量の小さいフェイスミーリングの第1選択。
  • 低い切れ刃あたりのコストと高い生産性。
  • 滑らかな切削動作による再切削抵抗。
  • 大幅に向上した切り屑除去率(MRR)。

M1200 MAX

M1200 Maxスクリュークランプは、切れ刃あたりのコストが最も低い工具を使用して、最大7.5 mmという比較的大きな切込み量での加工を必要とするお客様向けの12枚刃フェイスミルです。

  • 鋼やステンレス鋼、ねずみ鋳鉄、ノジュラー鋳鉄用のミル
  • WP35CM、WU20PM、WK15CM材種を使用した、汎用性の高いHNMU11 -MM形状。
  • 幅広い製品ラインナップ: 7 mmの強力で厚いインサートを備えた、リード角56°のカッター。
  • IC 11 mmのプレス焼結(PSTS)インサート。
  • 大きな切込み量(DOC)(Ap1最大値:7.5 mm)。

 

フィルタを選択
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (233)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(217)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(233)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(233)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(233)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(233)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(233)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(233)
    • M Stainless Steel (233)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(233)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(233)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(233)
    • K Cast Iron (233)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(233)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(230)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(230)
    • N Non-Ferrous Materials (169)
      • N1
        Wrought Aluminum (169)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(169)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(169)
    • S High-Temp Alloys (226)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(204)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(204)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(204)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(226)
    • H Hardened Materials (165)
      • H1
        Hardened Materials 44-48 HRC(165)
    Select All Star
    • CN (68)
    • DE (127)
    • GB (29)
    • IN (35)
    • SG (74)
    • US (79)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (91)
    • Face MillingFace Milling (158)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(7)
    • 1.0 in(4)
    • 1.25 in(1)
    • 1.26 in(8)
    • 1.5 in(4)
    • 1.575 in(7)
    • 1.969 in(8)
    • 2.0 in(8)
    • 2.48 in(11)
    • 2.5 in(8)
    • 3.0 in(13)
    • 3.15 in(14)
    • 3.938 in(13)
    • 4.0 in(12)
    • 4.921 in(12)
    • 5.0 in(6)
    • 6.0 in(5)
    • 6.299 in(5)
    • 7.875 in(3)
    • 8.0 in(2)
    • 9.843 in(3)
    • 10.0 in(2)
    • 12.0 in(1)
    • 12.403 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(7)
    • 25.401 mm(4)
    • 31.75 mm(1)
    • 32.0 mm(8)
    • 38.1 mm(4)
    • 40.0 mm(7)
    • 50.0 mm(8)
    • 50.801 mm(8)
    • 63.0 mm(11)
    • 63.5 mm(8)
    • 76.2 mm(13)
    • 80.0 mm(14)
    • 100.0 mm(13)
    • 101.601 mm(12)
    • 125.0 mm(12)
    • 127.0 mm(6)
    • 152.4 mm(5)
    • 160.0 mm(5)
    • 200.0 mm(3)
    • 203.201 mm(2)
    • 250.0 mm(3)
    • 254.0 mm(2)
    • 304.8 mm(1)
    • 315.0 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 33.725 mm(6)
    • 34.125 mm(3)
    • 39.125 mm(1)
    • 39.526 mm(1)
    • 40.475 mm(1)
    • 40.725 mm(6)
    • 46.151 mm(2)
    • 46.801 mm(1)
    • 46.825 mm(3)
    • 48.725 mm(2)
    • 50.95 mm(2)
    • 51.0 mm(1)
    • 52.25 mm(1)
    • 54.151 mm(1)
    • 56.75 mm(1)
    • 57.551 mm(1)
    • 58.7 mm(3)
    • 59.5 mm(3)
    • 61.0 mm(2)
    • 61.801 mm(2)
    • 64.15 mm(1)
    • 64.95 mm(1)
    • 67.9 mm(1)
    • 68.7 mm(1)
    • 69.75 mm(1)
    • 71.55 mm(1)
    • 71.7 mm(3)
    • 72.05 mm(1)
    • 72.2 mm(3)
    • 74.0 mm(3)
    • 74.5 mm(2)
    • 74.8 mm(1)
    • 77.125 mm(1)
    • 77.625 mm(1)
    • 80.875 mm(1)
    • 81.375 mm(1)
    • 82.95 mm(1)
    • 84.726 mm(2)
    • 84.9 mm(3)
    • 86.75 mm(2)
    • 87.2 mm(3)
    • 88.0 mm(2)
    • 88.525 mm(2)
    • 88.7 mm(3)
    • 90.325 mm(1)
    • 91.0 mm(3)
    • 91.801 mm(2)
    • 94.075 mm(1)
    • 94.125 mm(1)
    • 97.875 mm(1)
    • 106.75 mm(2)
    • 108.351 mm(1)
    • 108.5 mm(2)
    • 108.7 mm(3)
    • 110.301 mm(3)
    • 110.976 mm(3)
    • 111.801 mm(2)
    • 112.575 mm(5)
    • 113.4 mm(2)
    • 117.851 mm(1)
    • 119.45 mm(1)
    • 131.75 mm(2)
    • 133.5 mm(1)
    • 133.701 mm(3)
    • 133.725 mm(1)
    • 135.701 mm(1)
    • 135.951 mm(2)
    • 135.975 mm(1)
    • 136.75 mm(1)
    • 136.8 mm(1)
    • 137.951 mm(3)
    • 142.875 mm(1)
    • 144.875 mm(1)
    • 163.326 mm(1)
    • 163.375 mm(2)
    • 164.15 mm(1)
    • 164.201 mm(1)
    • 168.5 mm(1)
    • 170.976 mm(2)
    • 171.75 mm(1)
    • 171.8 mm(1)
    • 211.0 mm(1)
    • 211.75 mm(1)
    • 211.8 mm(1)
    • 214.175 mm(1)
    • 214.201 mm(1)
    • 261.0 mm(1)
    • 261.75 mm(1)
    • 261.8 mm(1)
    • 264.651 mm(1)
    • 265.0 mm(1)
    • 315.8 mm(1)
    • 326.0 mm(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 1.328 in(6)
    • 1.344 in(3)
    • 1.54 in(1)
    • 1.556 in(1)
    • 1.594 in(1)
    • 1.603 in(6)
    • 1.817 in(2)
    • 1.843 in(1)
    • 1.844 in(3)
    • 1.919 in(2)
    • 2.007 in(2)
    • 2.008 in(1)
    • 2.057 in(1)
    • 2.132 in(1)
    • 2.234 in(1)
    • 2.266 in(1)
    • 2.311 in(3)
    • 2.343 in(3)
    • 2.402 in(2)
    • 2.433 in(2)
    • 2.527 in(1)
    • 2.557 in(1)
    • 2.673 in(1)
    • 2.705 in(1)
    • 2.746 in(1)
    • 2.817 in(1)
    • 2.823 in(3)
    • 2.837 in(1)
    • 2.843 in(3)
    • 2.914 in(3)
    • 2.934 in(2)
    • 2.945 in(1)
    • 3.036 in(1)
    • 3.056 in(1)
    • 3.184 in(1)
    • 3.204 in(1)
    • 3.266 in(1)
    • 3.336 in(2)
    • 3.343 in(3)
    • 3.415 in(2)
    • 3.434 in(3)
    • 3.465 in(2)
    • 3.485 in(2)
    • 3.492 in(3)
    • 3.556 in(1)
    • 3.583 in(3)
    • 3.614 in(2)
    • 3.704 in(1)
    • 3.706 in(1)
    • 3.853 in(1)
    • 4.203 in(2)
    • 4.266 in(1)
    • 4.272 in(2)
    • 4.28 in(3)
    • 4.343 in(3)
    • 4.369 in(3)
    • 4.402 in(2)
    • 4.432 in(5)
    • 4.465 in(2)
    • 4.64 in(1)
    • 4.703 in(1)
    • 5.187 in(2)
    • 5.256 in(1)
    • 5.264 in(3)
    • 5.265 in(1)
    • 5.343 in(1)
    • 5.352 in(2)
    • 5.353 in(1)
    • 5.384 in(1)
    • 5.386 in(1)
    • 5.431 in(3)
    • 5.625 in(1)
    • 5.704 in(1)
    • 6.43 in(1)
    • 6.432 in(2)
    • 6.463 in(1)
    • 6.465 in(1)
    • 6.634 in(1)
    • 6.731 in(2)
    • 6.763 in(1)
    • 6.764 in(1)
    • 8.307 in(1)
    • 8.337 in(1)
    • 8.339 in(1)
    • 8.432 in(1)
    • 8.433 in(1)
    • 10.276 in(1)
    • 10.305 in(1)
    • 10.307 in(1)
    • 10.419 in(1)
    • 10.433 in(1)
    • 12.433 in(1)
    • 12.835 in(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.701 mm(12)
    • 2.2 mm(10)
    • 3.5 mm(49)
    • 4.4 mm(2)
    • 4.45 mm(1)
    • 4.5 mm(41)
    • 4.601 mm(1)
    • 4.7 mm(13)
    • 6.0 mm(10)
    • 7.5 mm(19)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.067 in(12)
    • 0.088 in(10)
    • 0.138 in(49)
    • 0.174 in(2)
    • 0.176 in(1)
    • 0.177 in(41)
    • 0.181 in(1)
    • 0.185 in(13)
    • 0.237 in(10)
    • 0.295 in(19)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 1.25 in(4)
    • 1.26 in(7)
    • 1.5 in(2)
    • 1.57 in(4)
    • 1.575 in(48)
    • 1.75 in(23)
    • 1.969 in(28)
    • 2.0 in(2)
    • 2.38 in(15)
    • 2.48 in(23)
    • 3.15 in(2)
    Reach MintoReach Max
    Reach
    Reach
    • 31.75 mm(4)
    • 32.0 mm(7)
    • 38.1 mm(2)
    • 39.875 mm(4)
    • 40.0 mm(48)
    • 44.45 mm(23)
    • 50.0 mm(28)
    • 50.801 mm(2)
    • 60.45 mm(15)
    • 63.0 mm(23)
    • 80.0 mm(2)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 15.0 (22)
    • 45.0 (94)
    • 56.0 (19)
    • 58.0 (23)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (88)
    • B-Cutter Retention Screw (28)
    • C-Bolt Circle (14)
    • KL Screw (3)
    • SHCS or RetScrw Or BoltCircle (3)
    • Screw-On Connection (6)
    • Straight-Cylindrical (9)
    • Weldon (7)
    Number of Flutes
    Number of Flutes
    • 10 (9)
    • 11 (2)
    • 12 (8)
    • 14 (5)
    • 16 (5)
    • 18 (2)
    • 2 (4)
    • 20 (2)
    • 22 (1)
    • 24 (1)
    • 28 (1)
    • 3 (12)
    • 4 (19)
    • 5 (25)
    • 6 (24)
    • 7 (4)
    • 8 (24)
    • 9 (10)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 3.0 (57)
    • 6.0 (53)
    • 12.0 (253)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.57 in(4)
    • 1.575 in(40)
    • 1.75 in(23)
    • 1.969 in(27)
    • 2.0 in(2)
    • 2.158 in(1)
    • 2.165 in(1)
    • 2.224 in(1)
    • 2.38 in(15)
    • 2.406 in(1)
    • 2.48 in(25)
    • 3.15 in(2)
    • 3.228 in(1)
    • 3.281 in(2)
    • 3.785 in(1)
    • 3.819 in(2)
    • 4.213 in(1)
    • 4.724 in(2)
    • 4.8 in(1)
    • 5.118 in(4)
    • 7.875 in(2)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 39.875 mm(4)
    • 40.0 mm(40)
    • 44.45 mm(23)
    • 50.0 mm(27)
    • 50.801 mm(2)
    • 54.801 mm(1)
    • 55.0 mm(1)
    • 56.5 mm(1)
    • 60.45 mm(15)
    • 61.1 mm(1)
    • 63.0 mm(25)
    • 80.0 mm(2)
    • 82.0 mm(1)
    • 83.301 mm(2)
    • 96.101 mm(1)
    • 97.0 mm(2)
    • 107.0 mm(1)
    • 120.0 mm(2)
    • 121.926 mm(1)
    • 130.0 mm(4)
    • 200.0 mm(2)
    Over All Length [L] MintoOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.039 in(24)
    • 0.047 in(214)
    • 0.052 in(57)
    • 0.063 in(53)
    • 0.126 in(79)
    • 0.171 in(75)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 1.0 mm(24)
    • 1.201 mm(214)
    • 1.3 mm(57)
    • 1.6 mm(53)
    • 3.2 mm(79)
    • 4.351 mm(75)
    Corner Radius MintoCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(257)
    • 1.201 mm(12)
    Corner Chamfer MintoCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(257)
    • 0.047 in(12)
    Corner Chamfer MintoCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM-U (122)
    • TN5515 (139)
    • TN6501 (121)
    • TN6505 (74)
    • TN6510 (122)
    • TN6520 (152)
    • TN6525 (146)
    • TN6540 (152)
    • TN7535 (139)
    • WK15CM (169)
    • WK20PM (66)
    • WK25YM (66)
    • WP25PM (150)
    • WP35CM (171)
    • WP40PM (151)
    • WS30PM (143)
    • WS40PM (153)
    • WU20PM (12)
    Hand Of Tool
    Hand Of Tool
    • R (158)
    Wiper Insert
    Wiper Insert
    • N (87)
    • Y (24)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.76 in(4)
    • 0.958 in(4)
    • 1.006 in(3)
    • 1.059 in(1)
    • 1.256 in(4)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 19.3 mm(4)
    • 24.3 mm(4)
    • 25.55 mm(3)
    • 26.901 mm(1)
    • 31.901 mm(4)
    Neck Diameter MintoNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • H-HEXAGON 120 (111)
    Insert IC Size
    Insert IC Size
    • 12.701 mm(43)
    • 15.875 mm(63)
    • 19.05 mm(5)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.5 in(43)
    • 0.625 in(63)
    • 0.75 in(5)
    Insert IC Size MintoInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 6.0 mm(1)
    • 6.775 mm(8)
    • 6.801 mm(16)
    • 6.825 mm(18)
    • 8.5 mm(10)
    • 8.576 mm(18)
    • 8.6 mm(26)
    • 9.175 mm(1)
    • 9.576 mm(8)
    • 10.75 mm(5)
    Cutting Edge Length MintoCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.237 in(1)
    • 0.267 in(8)
    • 0.268 in(16)
    • 0.269 in(18)
    • 0.335 in(10)
    • 0.338 in(18)
    • 0.339 in(26)
    • 0.361 in(1)
    • 0.377 in(8)
    • 0.423 in(5)
    Cutting Edge Length MintoCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (34)
    • HD (35)
    • LD (30)
    • MM (11)
    Cutting Tool Material
    Cutting Tool Material
    • C N (1)
    • H W (110)
    Tolerance Class
    Tolerance Class
    • D (8)
    • E (1)
    • G (50)
    • M (5)
    • P (47)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (16)
    • SCREW-ON (6)
    • SHELL MILL (136)
    Back-End Diameter
    Back-End Diameter
    • 12.701 mm(2)
    • 19.05 mm(17)
    • 19.075 mm(1)
    • 19.1 mm(2)
    • 20.0 mm(3)
    • 22.0 mm(25)
    • 25.0 mm(9)
    • 25.401 mm(14)
    • 27.0 mm(14)
    • 29.0 mm(6)
    • 31.75 mm(2)
    • 32.0 mm(13)
    • 38.1 mm(16)
    • 40.0 mm(17)
    • 50.801 mm(5)
    • 60.0 mm(7)
    • 63.5 mm(5)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(2)
    • 0.75 in(17)
    • 0.751 in(1)
    • 0.752 in(2)
    • 0.787 in(3)
    • 0.866 in(25)
    • 0.984 in(9)
    • 1.0 in(14)
    • 1.063 in(14)
    • 1.143 in(6)
    • 1.25 in(2)
    • 1.26 in(13)
    • 1.5 in(16)
    • 1.575 in(17)
    • 2.0 in(5)
    • 2.362 in(7)
    • 2.5 in(5)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    マイソリューションページにを追加しようとしています. 続行しますか?
    Select the destination where you want to move to.
    新規 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO製品型番材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?