HSR・高速リーマ・超硬製品

フィルタを選択
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (64)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(64)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(64)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(64)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(64)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(64)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(64)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(64)
    • M Stainless Steel (64)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(64)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(64)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(64)
    • K Cast Iron (64)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(64)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(64)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(64)
    • N Non-Ferrous Materials (42)
      • N1
        Wrought Aluminum (42)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(42)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(42)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (42)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (42)
      • N6
        Carbon, Graphite Composites, CFRP (42)
    • S High-Temp Alloys (64)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(64)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(64)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(42)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(42)
    Applications
    Applications
    • Blind & Cross Hole FinishingBlind & Cross Hole Finishing (18)
    • Blind Hole FinishingBlind Hole Finishing (18)
    • Through & Cross Hole FinishingThrough & Cross Hole Finishing (46)
    • Through Hole FinishingThrough Hole Finishing (46)
    Cutting Diameter
    Cutting Diameter
    • 0.055 in(1)
    • 0.06 in(1)
    • 0.063 in(1)
    • 0.079 in(5)
    • 0.088 in(1)
    • 0.098 in(1)
    • 0.11 in(1)
    • 0.119 in(5)
    • 0.126 in(1)
    • 0.138 in(1)
    • 0.157 in(5)
    • 0.177 in(1)
    • 0.197 in(6)
    • 0.237 in(7)
    • 0.276 in(1)
    • 0.315 in(7)
    • 0.335 in(1)
    • 0.354 in(1)
    • 0.374 in(1)
    • 0.394 in(6)
    • 0.473 in(5)
    • 0.551 in(5)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 1.401 mm(1)
    • 1.5 mm(1)
    • 1.6 mm(1)
    • 2.0 mm(5)
    • 2.2 mm(1)
    • 2.5 mm(1)
    • 2.801 mm(1)
    • 3.0 mm(5)
    • 3.2 mm(1)
    • 3.5 mm(1)
    • 4.0 mm(5)
    • 4.5 mm(1)
    • 5.0 mm(6)
    • 6.0 mm(7)
    • 7.0 mm(1)
    • 8.0 mm(7)
    • 8.5 mm(1)
    • 9.0 mm(1)
    • 9.5 mm(1)
    • 10.0 mm(6)
    • 12.0 mm(5)
    • 14.0 mm(5)
    Cutting Diameter MintoCutting Diameter Max
    Number of Flutes
    Number of Flutes
    • 3 (3)
    • 4 (27)
    • 6 (34)
    Internal Coolant Capability
    Internal Coolant Capability
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K10 (20)
    • K10F (22)
    • K10F-DCFD (22)
    Helix Hand
    Helix Hand
    • L (46)
    • N (18)
    Lead in Length
    Lead in Length
    • 0.2 mm(2)
    • 0.301 mm(6)
    • 0.4 mm(8)
    • 0.5 mm(4)
    • 0.601 mm(4)
    • 0.701 mm(7)
    • 0.9 mm(7)
    • 1.1 mm(6)
    Lead in Length MintoLead in Length Max
    Lead In Length
    Lead In Length
    • 0.0 in(8)
    • 0.001 in(30)
    • 0.002 in(6)
    Lead In Length MintoLead In Length Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 1.401 mm(1)
    • 1.5 mm(1)
    • 1.6 mm(1)
    • 2.0 mm(1)
    • 2.2 mm(1)
    • 2.5 mm(1)
    • 2.801 mm(1)
    • 3.0 mm(9)
    • 3.2 mm(1)
    • 3.5 mm(1)
    • 4.0 mm(5)
    • 4.5 mm(1)
    • 5.0 mm(1)
    • 5.601 mm(1)
    • 6.0 mm(11)
    • 7.101 mm(1)
    • 8.0 mm(8)
    • 9.0 mm(2)
    • 10.0 mm(6)
    • 12.0 mm(5)
    • 14.0 mm(5)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.055 in(1)
    • 0.06 in(1)
    • 0.063 in(1)
    • 0.079 in(1)
    • 0.088 in(1)
    • 0.098 in(1)
    • 0.11 in(1)
    • 0.119 in(9)
    • 0.126 in(1)
    • 0.138 in(1)
    • 0.157 in(5)
    • 0.177 in(1)
    • 0.197 in(1)
    • 0.221 in(1)
    • 0.237 in(11)
    • 0.28 in(1)
    • 0.315 in(8)
    • 0.354 in(2)
    • 0.394 in(6)
    • 0.473 in(5)
    • 0.551 in(5)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    マイソリューションページにを追加しようとしています. 続行しますか?
    Select the destination where you want to move to.
    新規 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO製品型番 材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)