通知

すべて既読にする

Versatile Face Mill for All Machine Conditions

This versatile, 16-edged face mill for medium roughing or semi-finishing of steel, stainless steel, cast iron and nodular iron components will perform in all machine conditions including low-power machines, unstable, non-rigid set-ups, long overhangs, weak machines, or even weak fixture conditions.

Features and Benefits

  • Universal -MM geometry insert in grades WP35CM, WU20PM, WK15CM
  • 44º cutter lead angle
  • Depth of Cut (DOC): (4mm Ap1 max)
  • Precision ground insert
  • Smart insert design engineered to resist shock loads resulting in longer tool life

Thrive in a Variety of Machine Setups

When you need the lowest cost-per-edge in medium-roughing applications, look no further than M1600. This face mill creates a smooth cut allowing for lower power consumption on the machine which results in a longer life on the spindle giving you more value for your money.

Watch as we put M1600 side milling roughing to the test in cast iron, steel, and stainless steel.

フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (22)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (22)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (22)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (22)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (22)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (22)
  • M Stainless Steel (22)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (22)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (22)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (22)
  • K Cast Iron (27)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (27)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (27)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (27)
  • N Non-Ferrous Materials (22)
    • N1
      Wrought Aluminum
      (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (22)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
  • S High-Temp Alloys (22)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (21)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (21)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (21)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (22)
  • H Hardened Materials (23)
    • H1
      Hardened Materials 44-48 HRC
      (23)
Select All Star
  • CN (14)
  • DE (16)
  • IN (17)
Applications
Applications
  • Chamfer Milling Chamfer Milling (12)
  • Face Milling Face Milling (19)
Cutting Diameter
Cutting Diameter
  • 1.969 in (1)
  • 2.0 in (1)
  • 2.48 in (1)
  • 2.5 in (1)
  • 3.0 in (2)
  • 3.15 in (2)
  • 3.938 in (2)
  • 4.0 in (2)
  • 4.921 in (2)
  • 5.0 in (1)
  • 6.0 in (2)
  • 6.299 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 50.0 mm (1)
  • 50.801 mm (1)
  • 63.0 mm (1)
  • 63.5 mm (1)
  • 76.2 mm (2)
  • 80.0 mm (2)
  • 100.0 mm (2)
  • 101.601 mm (2)
  • 125.0 mm (2)
  • 127.0 mm (1)
  • 152.4 mm (2)
  • 160.0 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 60.725 mm (1)
  • 61.526 mm (1)
  • 73.726 mm (1)
  • 74.226 mm (1)
  • 86.45 mm (2)
  • 86.926 mm (1)
  • 90.726 mm (1)
  • 106.45 mm (1)
  • 108.051 mm (1)
  • 110.726 mm (1)
  • 112.325 mm (1)
  • 131.451 mm (1)
  • 135.725 mm (1)
  • 137.725 mm (1)
  • 158.851 mm (1)
  • 163.125 mm (1)
  • 166.451 mm (1)
  • 170.726 mm (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 2.391 in (1)
  • 2.422 in (1)
  • 2.903 in (1)
  • 2.922 in (1)
  • 3.404 in (2)
  • 3.422 in (1)
  • 3.572 in (1)
  • 4.191 in (1)
  • 4.255 in (1)
  • 4.359 in (1)
  • 4.422 in (1)
  • 5.175 in (1)
  • 5.344 in (1)
  • 5.422 in (1)
  • 6.255 in (1)
  • 6.422 in (1)
  • 6.553 in (1)
  • 6.721 in (1)
Maximum Cutting Diameter Min to Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 2.1 mm (7)
  • 3.7 mm (12)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.083 in (7)
  • 0.146 in (12)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 1.575 in (4)
  • 1.75 in (1)
  • 1.969 in (6)
  • 2.0 in (1)
  • 2.38 in (2)
  • 2.48 in (5)
Reach Min to Reach Max
Reach
Reach
  • 40.0 mm (4)
  • 44.45 mm (1)
  • 50.0 mm (6)
  • 50.801 mm (1)
  • 60.45 mm (2)
  • 63.0 mm (5)
Reach Min to Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 42.0 (7)
  • 43.0 (12)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (8)
  • B-Cutter Retention Screw (9)
  • C-Bolt Circle (2)
Number of Flutes
Number of Flutes
  • 10 (2)
  • 11 (2)
  • 12 (1)
  • 13 (2)
  • 16 (2)
  • 4 (2)
  • 5 (2)
  • 7 (2)
  • 8 (2)
  • 9 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 2.0 (9)
  • 16.0 (25)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (9)
  • 0.031 in (10)
  • 0.047 in (15)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (9)
  • 0.8 mm (10)
  • 1.201 mm (15)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (9)
  • 0.601 mm (10)
  • 0.775 mm (15)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (9)
  • 0.024 in (10)
  • 0.031 in (15)
Corner Chamfer Min to Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM-F (8)
  • WK15CM (21)
  • WP35CM (13)
  • WU10PM (9)
  • WU20PM (21)
Hand Of Tool
Hand Of Tool
  • R (19)
Wiper Insert
Wiper Insert
  • Y (8)
frontEnd
Insert Shape
Insert Shape
  • O-OCTOGON 135 (25)
  • X-RHOMBIC 83 (9)
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • O-OCTOGON 135 (6)
  • X-RHOMBIC 83 (2)
Insert IC Size
Insert IC Size
  • 10.0 mm (3)
  • 12.701 mm (2)
  • 16.875 mm (3)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.394 in (3)
  • 0.5 in (2)
  • 0.664 in (3)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 4.101 mm (3)
  • 6.875 mm (3)
  • 8.725 mm (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.161 in (3)
  • 0.271 in (3)
  • 0.345 in (1)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MM (6)
Cutting Tool Material
Cutting Tool Material
  • H W (8)
Tolerance Class
Tolerance Class
  • G (6)
  • H (2)
backEnd
Connection Type
Connection Type
  • SHELL MILL (19)
Back-End Diameter
Back-End Diameter
  • 19.05 mm (2)
  • 22.0 mm (2)
  • 25.401 mm (2)
  • 27.0 mm (2)
  • 32.0 mm (2)
  • 38.1 mm (3)
  • 40.0 mm (4)
  • 50.801 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.75 in (2)
  • 0.866 in (2)
  • 1.0 in (2)
  • 1.063 in (2)
  • 1.26 in (2)
  • 1.5 in (3)
  • 1.575 in (4)
  • 2.0 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
カテゴリで絞り込む:
製品を表示
メートル
インチ

オリジナル製品

フェイスミル • M1600シリーズ

インサート • ONGX-MM
(3 Products)
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
6095310 ONGX04T308ANSNMM ONGX04T308ANSNMM WK15CM   16 10.0000 .3937 4.1000 .1616 3.9730 .1564 0.6000 .0236 0.8000 .0312 0.0400 .0016
    定価:
    $17,07 /各.
    価格::
    数量
    6291724 ONGX04T308ANSNMM ONGX04T308ANSNMM WU20PM   16 10.0000 .3937 4.1000 .1616 3.9730 .1564 0.6000 .0236 0.8000 .0312 0.0500 .0020
      定価:
      $17,07 /各.
      価格::
      数量
      6243772 ONGX04T308ANSNMM ONGX04T308ANSNMM WU10PM   16 10.0000 .3937 4.1000 .1616 3.9730 .1564 0.6000 .0236 0.8000 .0312 0.0350 .0014
        定価:
        $17,07 /各.
        価格::
        数量
        定価:
        割引: %
        価格::
        配置転換 この品目はありません
        交換品 この品目は、代理店経由で入手できる場合があります
        数量

        販売包装単位

        オリジナル製品

        フェイスミル • M1600シリーズ

        ワイパーインサート • XDHX-W2C
        (2 Products)
        製品を表示
        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
        6739214 XDHX1004RW2C XDHX1004RW2C THM-F   2 12.7000 .5000 8.7210   4.7600 .1875 0.0000   0.0200 .0008
          定価:
          $24,38 /各.
          価格::
          数量
          6877620 XDHX1004RW2C XDHX1004RW2C WU10PM   2 12.7000 .5000     4.7600 .1875     0.0200 .0008
            定価:
            $26,08 /各.
            価格::
            数量
            定価:
            割引: %
            価格::
            配置転換 この品目はありません
            交換品 この品目は、代理店経由で入手できる場合があります
            数量

            販売包装単位

            オリジナル製品

            フェイスミル • M1600シリーズ

            シェルミル • 鋳鉄の仕上げ加工
            (4 Products)
            • フェイスミーリングフェイスミーリング
            製品を表示
            SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
            5626416 M1600D080Z08W2S27ON04 M1600D080Z08W2S27ON04   80.0000 3.149 86.4470 3.403 27.0 1.063 80.0000 3.149 50.0000 1.968 2.1000 .0827 8   N 1.56
              定価:
              $699,60 /各.
              価格::
              数量
              5626417 M1600D100Z10W2S32ON04 M1600D100Z10W2S32ON04   100.0000 3.937 106.4470 4.190 32.0 1.259 99.9700 3.935 50.0000 1.968 2.1000 .0827 10   N 4.79
                定価:
                $839,52 /各.
                価格::
                数量
                5546056 M1600D125Z12W3S40ON04 M1600D125Z12W3S40ON04   125.0000 4.921 131.4470 5.175 40.0 1.574 89.0000 3.503 63.0000 2.480 2.1000 .0827 12   N 8.39
                  定価:
                  $1.017,60 /各.
                  価格::
                  数量
                  5626418 M1600D160Z16W4S40ON04 M1600D160Z16W4S40ON04   160.0000 6.299 166.4450 6.553 40.0 1.574 90.0000 3.543 63.0000 2.480 2.1000 .0827 16 5700 N 6.40
                    定価:
                    $1.424,64 /各.
                    価格::
                    数量
                    定価:
                    割引: %
                    価格::
                    配置転換 この品目はありません
                    交換品 この品目は、代理店経由で入手できる場合があります
                    数量

                    販売包装単位

                    オリジナル製品

                    フェイスミル • M1600シリーズ

                    M1600 • シェルミル • 切れ刃あたり低コストの鋼および鋳鉄用フェイスミル
                    (6 Products)
                    • フェイスミーリングフェイスミーリング
                    • 側面加工/ショルダー加工:緩やかな面取り側面加工/ショルダー加工:緩やかな面取り
                    製品を表示
                    SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D4] Bolt Circle 4 [D4] Bolt Circle 3 [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                    4002796 M1600D050Z04S22ON06 M1600D050Z04S22ON06   50.0000 1.968 60.7330 2.391 22.01 .8666     40.0000 1.574 40.0000 1.574 40.0000 1.574 40.0000 1.574 3.7000 .1457 4   Y 0.28
                      定価:
                      $477,00 /各.
                      価格::
                      数量
                      4002797 M1600D063Z05S22ON06 M1600D063Z05S22ON06   63.0000 2.480 73.7320 2.902 22.01 .8666     40.0000 1.574 40.0000 1.574 40.0000 1.574 40.0000 1.574 3.7000 .1457 5   Y 0.43
                        定価:
                        $519,40 /各.
                        価格::
                        数量
                        3837977 M1600D080Z07S27ON06 M1600D080Z07S27ON06   80.0000 3.149 90.7320 3.572 27.0 1.063     60.0000 2.362 50.0000 1.968 50.0000 1.968 50.0000 1.968 3.7000 .1457 7   Y 0.97
                          定価:
                          $583,00 /各.
                          価格::
                          数量
                          3860336 M1600D100Z09S32ON06 M1600D100Z09S32ON06   100.0000 3.937 110.7310 4.359 32.012 1.260     78.0000 3.070 50.0000 1.968 50.0000 1.968 50.0000 1.968 3.7000 .1457 9   Y 1.52
                            定価:
                            $699,60 /各.
                            価格::
                            数量
                            3837978 M1600D125Z11S40ON06 M1600D125Z11S40ON06   125.0000 4.921 135.7310 5.343 40.012 1.575     89.0000 3.503 63.0000 2.480 63.0000 2.480 63.0000 2.480 3.7000 .1457 11 6900 Y 2.70
                              定価:
                              $848,00 /各.
                              価格::
                              数量
                              4002798 M1600D160Z13S40ON06 M1600D160Z13S40ON06   160.0000 6.299 170.7310 6.721 40.012 1.575 66.7000 2.626 90.0000 3.543 63.0000 2.480 63.0000 2.480 63.0000 2.480 3.7000 .1457 13   Y 3.83
                                定価:
                                $1.187,20 /各.
                                価格::
                                数量
                                定価:
                                割引: %
                                価格::
                                配置転換 この品目はありません
                                交換品 この品目は、代理店経由で入手できる場合があります
                                数量

                                販売包装単位

                                オリジナル製品

                                フェイスミル • M1600シリーズ

                                インサート • ONGX -MM • 切れ刃あたりのコストが低い加工
                                (3 Products)
                                製品を表示
                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                6852431 ONGX060512ANSNMM ONGX060512ANSNMM WP35CM   16 16.8800 .6646 6.8740 .2706 5.4730 .2155 0.7650 .0301 1.2000 .0468 0.0550 .0022
                                  定価:
                                  $24,38 /各.
                                  価格::
                                  数量
                                  6072424 ONGX060512ANSNMM ONGX060512ANSNMM WK15CM   16 16.8800 .6646 6.8740 .2706 5.4730 .2155 0.7650 .0301 1.2000 .0468 0.0400 .0016
                                    定価:
                                    $24,38 /各.
                                    価格::
                                    数量
                                    3778942 ONGX060512ANSNMM ONGX060512ANSNMM WU20PM   16 16.8800 .6646 6.8740 .2706 5.4730 .2155 0.7650 .0301 1.2000 .0468 0.0550 .0022
                                      定価:
                                      $23,32 /各.
                                      価格::
                                      数量
                                      定価:
                                      割引: %
                                      価格::
                                      配置転換 この品目はありません
                                      交換品 この品目は、代理店経由で入手できる場合があります
                                      数量

                                      販売包装単位

                                      オリジナル製品

                                      Face Mills • M1600 Series

                                      Shell Mills • Cast Iron Finishing
                                      (3 Products)
                                      • フェイスミーリングフェイスミーリング
                                      製品を表示
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Coolant Supply Weight Pounds
                                      6921235 M1600U300Z08W2S100ON04 M1600U300Z08W2S100ON04 76.2000 3.000 86.4464 3.403 25.4 1.0 80.0000 3.149 50.0000 1.968 2.1000 .0827 8 N 3.31
                                        定価:
                                        $699,60 /各.
                                        価格::
                                        数量
                                        6921236 M1600U400Z10W2S150ON04 M1600U400Z10W2S150ON04 101.6000 4.000 108.0592 4.254 38.1 1.5 96.7740 3.810 50.0000 1.968 2.1000 .0827 10 N 4.75
                                          定価:
                                          $839,52 /各.
                                          価格::
                                          数量
                                          6921237 M1600U600Z16W4S200ON04 M1600U600Z16W4S200ON04 152.4000 6.000 158.8465 6.253 50.8 2.0 123.8250 4.875 62.9920 2.480 2.1000 .0827 16 N 13.02
                                            定価:
                                            $1.017,60 /各.
                                            価格::
                                            数量
                                            定価:
                                            割引: %
                                            価格::
                                            配置転換 この品目はありません
                                            交換品 この品目は、代理店経由で入手できる場合があります
                                            数量

                                            販売包装単位

                                            オリジナル製品

                                            Face Mills • M1600 Series

                                            M1600 • Shell Mills • Steel and Cast Iron Face Mills at Low Cost per Edge
                                            (6 Products)
                                            • 100018357100018357
                                            • 側面加工/ショルダー加工:緩やかな面取り側面加工/ショルダー加工:緩やかな面取り
                                            製品を表示
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [L1] Gage Length [L1] Gage Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Pounds
                                            6921229 M1600U200Z04S075ON06 M1600U200Z04S075ON06 50.8000 2.000 61.5340 2.422 19.05 .75 44.4500 1.750 40.0050 1.575 40.0050 1.575 40.0050 1.575 3.7000 .1457 4   Y 0.69
                                              定価:
                                              $477,00 /各.
                                              価格::
                                              数量
                                              6921230 M1600U250Z05S075ON06 M1600U250Z05S075ON06 63.5000 2.500 74.2340 2.922 19.05 .75 44.4500 1.750 40.0050 1.575 40.0050 1.575 40.0050 1.575 3.7000 .1457 5   Y 1.03
                                                定価:
                                                $519,40 /各.
                                                価格::
                                                数量
                                                6921231 M1600U300Z07S100ON06 M1600U300Z07S100ON06 76.2000 3.000 86.9315 3.422 25.4 1.0 69.8500 2.750 44.4500 1.750 44.4500 1.750 44.4500 1.750 3.7000 .1457 7   Y 2.05
                                                  定価:
                                                  $583,00 /各.
                                                  価格::
                                                  数量
                                                  6921232 M1600U400Z09S150ON06 M1600U400Z09S150ON06 101.6000 4.000 112.3315 4.422 38.1 1.5 85.8520 3.380 50.8000 2.000 50.8000 2.000 50.8000 2.000 3.7000 .1457 9   Y 3.28
                                                    定価:
                                                    $699,60 /各.
                                                    価格::
                                                    数量
                                                    6921233 M1600U500Z11S150ON06 M1600U500Z11S150ON06 127.0000 5.000 137.7315 5.422 38.1 1.5 96.7740 3.810 60.4520 2.380 60.4520 2.380 60.4520 2.380 3.7000 .1457 11 6900 Y 5.99
                                                      定価:
                                                      $848,00 /各.
                                                      価格::
                                                      数量
                                                      6921234 M1600U600Z13S200ON06 M1600U600Z13S200ON06 152.4000 6.000 163.1315 6.422 50.8 2.0 123.8250 4.875 60.4520 2.380 60.4520 2.380 60.4520 2.380 3.7000 .1457 13   Y 9.31
                                                        定価:
                                                        $1.187,20 /各.
                                                        価格::
                                                        数量
                                                        定価:
                                                        割引: %
                                                        価格::
                                                        配置転換 この品目はありません
                                                        交換品 この品目は、代理店経由で入手できる場合があります
                                                        数量

                                                        販売包装単位

                                                        product-image
                                                        Please adjust the following properties from

                                                        ISO製品型番

                                                        ANSI製品型番

                                                        to find similar products.
                                                        複製を作成しようとしています . 続行しますか?
                                                        削除しようとしています 続行しますか?
                                                        の名前を何に変更しますか?
                                                        有効な名前を入力してください
                                                        重複の名前を入力してください
                                                        有効な名前を入力してください
                                                        マイソリューションページにを追加しようとしています. 続行しますか?
                                                        有効な名前を入力してください
                                                        次のコピーを送信

                                                        有効なメールアドレスを入力してください
                                                        有効な名前を入力してください

                                                        次のCAD図面が見つかりました

                                                        お探しのファイルを一括して選択してダウンロードできます

                                                        ダッシュボード情報を表示するには、ログインする必要があります
                                                        Session expired due to inactivity, please login again
                                                        カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
                                                        アイテムがカートに正常に追加されました
                                                        カートを表示