ようこそ
設定をご確認ください
設定の更新

提案製品

Product Family suggestions

WIDIAにお任せ

製品特有のご質問がありますか？

専門分野別のグローバルサービス担当の全リストを見る

クイックオーダー
品目 がカートに正常に追加されました
カートの表示

WIDIAにお任せ

製品特有のご質問がありますか？

専門分野別のグローバルサービス担当の全リストを見る

品目 がカートに正常に追加されました
カートの表示
Exit Search ソリューションに戻る

ソリューション編集

ソリューション追加

ソリューション名: {{SolutionName}}
お問い合わせ
Cartridge Milling System Tool Bodies
Cartridge Milling System Tool Bodies
Cartridge Milling System Tool Bodies
Cartridge Milling System Tool Bodies

M4000 • Face Mills • Inch

Cartridge Milling System Tool Bodies

特徴と利点

  • Roughing and finishing with one single tool.

  • Quick cartridge stop feature.

  • Easy runout adjustment.

  • Easy change of cartridges with different insert styles and lead angles.

使用法と用途

  • ミーリング — 側面および正面ミーリング — 側面および正面
  • フェイスミーリングフェイスミーリング
Cartridge Milling System Tool Bodies
フィルタと列
フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (4)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (4)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (4)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (4)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (4)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (4)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (4)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (4)
  • M Stainless Steel (4)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (4)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (4)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (4)
  • K Cast Iron (4)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (4)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (4)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (4)
  • N Non-Ferrous Materials (4)
    • N1
      Wrought Aluminum (4)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (4)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (4)
  • S High-Temp Alloys (4)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (4)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (4)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (4)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (4)
  • H Hardened Materials (4)
    • H1
      Hardened Materials 44-48 HRC (4)
    • H2
      Hardened Materials 48-55 HRC (4)
    • H3
      Hardened Materials 56-60 HRC (4)
Applications
Applications
  • Chamfer Milling Chamfer Milling (4)
  • Face Milling Face Milling (4)
  • Shoulder Milling Shoulder Milling (4)
Cutting Diameter
Cutting Diameter
  • 6.0 in (2)
  • 12.0 in (2)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 152.4 mm (2)
  • 304.8 mm (2)
Cutting Diameter Min to Cutting Diameter Max
Reach
Reach
  • 2.48 in (1)
  • 3.15 in (3)
Reach Min to Reach Max
Reach
Reach
  • 63.0 mm (1)
  • 80.0 mm (3)
Reach Min to Reach Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (2)
  • C-Bolt Circle (2)
Number of Flutes
Number of Flutes
  • 12 (1)
  • 16 (1)
  • 22 (1)
  • 8 (1)
Over All Length [L]
Over All Length [L]
  • 2.48 in (1)
  • 3.15 in (3)
Over All Length [L] Min to Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 63.0 mm (1)
  • 80.0 mm (3)
Over All Length [L] Min to Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (4)
  • 0.008 in (4)
  • 0.016 in (4)
  • 0.031 in (4)
  • 0.038 in (4)
  • 0.044 in (4)
  • 0.047 in (4)
  • 0.052 in (4)
  • 0.063 in (4)
  • 0.066 in (4)
  • 0.075 in (4)
  • 0.079 in (4)
  • 0.094 in (4)
  • 0.095 in (4)
  • 0.098 in (4)
  • 0.122 in (4)
  • 0.125 in (4)
  • 0.126 in (4)
  • 0.157 in (4)
  • 0.171 in (4)
  • 0.237 in (4)
  • 0.315 in (4)
  • 1.969 in (4)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (4)
  • 0.2 mm (4)
  • 0.4 mm (4)
  • 0.775 mm (4)
  • 0.8 mm (4)
  • 0.976 mm (4)
  • 1.1 mm (4)
  • 1.201 mm (4)
  • 1.3 mm (4)
  • 1.6 mm (4)
  • 1.675 mm (4)
  • 1.901 mm (4)
  • 2.0 mm (4)
  • 2.375 mm (4)
  • 2.401 mm (4)
  • 2.5 mm (4)
  • 3.1 mm (4)
  • 3.176 mm (4)
  • 3.2 mm (4)
  • 4.0 mm (4)
  • 4.351 mm (4)
  • 6.0 mm (4)
  • 8.0 mm (4)
  • 50.0 mm (4)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (4)
  • 0.65 mm (4)
  • 0.701 mm (4)
  • 1.0 mm (4)
  • 1.026 mm (4)
  • 1.401 mm (4)
  • 1.475 mm (4)
  • 1.5 mm (4)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (4)
  • 0.027 in (4)
  • 0.028 in (4)
  • 0.039 in (4)
  • 0.04 in (4)
  • 0.055 in (4)
  • 0.058 in (4)
  • 0.06 in (4)
Corner Chamfer Min to Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (4)
  • THM-U (4)
  • THR (4)
  • TN2510 (4)
  • TN25M (4)
  • TN450 (4)
  • TN5015 (4)
  • TN5020 (4)
  • TN5505 (4)
  • TN5515 (4)
  • TN6501 (4)
  • TN6502 (4)
  • TN6505 (4)
  • TN6510 (4)
  • TN6520 (4)
  • TN6525 (4)
  • TN6540 (4)
  • TN7015 (4)
  • TN7035 (4)
  • TN7110 (4)
  • TN7135 (4)
  • TN7525 (4)
  • TN7535 (4)
  • TTI25 (4)
  • TTM (4)
  • TTM08 (4)
  • TTR (4)
  • WDN10U (4)
  • WK15CM (4)
  • WK15PM (4)
  • WK25YM (4)
  • WN10HM (4)
  • WN25PM (4)
  • WP25PM (4)
  • WP35CM (4)
  • WP40PM (4)
  • WS30PM (4)
  • WS40PM (4)
  • WU10PM (4)
  • WU20PM (4)
  • WU35PM (4)
frontEnd
Insert Shape
Insert Shape
  • H-HEXAGON 120 (4)
  • R-ROUND (4)
  • S-SQUARE 90 (4)
  • T-TRIANGLE 60 (4)
  • X-PARALLELOGRAM 80 (4)
  • X-RECTANGLE MILL 4 90 (4)
backEnd
Back-End Diameter
Back-End Diameter
  • 50.801 mm (2)
  • 63.5 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 2.0 in (2)
  • 2.5 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
以下に示すパラメータのいずれかを使用して表示列を変更することができます。最大7列まで表示できます。
表示 1- 4 / 4 結果
列を選択
フィルタを選択
メートル
インチ
表示
メートル
インチ
SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [L] Overall Length [L] Overall Length Weight Pounds Coolant Supply Max RPM Number of Inserts [D4] Bolt Circle 4 [D4] Bolt Circle 3 [L1] Gage Length [L1] Gage Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter
4136358 M4000D1200Z16ADJ M4000D1200Z16ADJ 304.8 12 80 3.15 50.57 N 1000 16 101.6 4 80 3.15 63.5 2.5 286 11.26
    定価:
    $2,118.68 /各
    価格::
    4136359 M4000D1200Z22ADJ M4000D1200Z22ADJ 304.8 12 80 3.15 50.42 N 1000 22 101.6 4 80 3.15 63.5 2.5 286 11.26
      定価:
      $2,479.60 /各
      価格::
      4136312 M4000D600Z08ADJ M4000D600Z08ADJ 152.4 6 63 2.48 9.73 N 1800 8     63 2.48 50.8 2 137 5.394
        定価:
        $854.07 /各
        価格::
        4136353 M4000D600Z12ADJ M4000D600Z12ADJ 152.4 6 80 3.15 13.53 N 1800 12     80 3.15 50.8 2 137 5.394
          定価:
          $1,095.15 /各
          価格::
          定価:
          割引: %
          価格::
          配置転換 この品目はありません
          交換品 この品目は、代理店経由で入手できる場合があります
          product-image
          Please adjust the following properties from

          ISO製品型番

          ANSI製品型番

          to find similar products.

          The following files are available

          Please select a file to download

          Models

          Product data

          I have read and accepted the Terms & Conditions of use

          Can’t find the file type you’re looking for?

          複製を作成しようとしています . 続行しますか?
          削除しようとしています 続行しますか?
          削除しようとしています and all items within that folder. 続行しますか?
          Are you sure you want to permanently delete these items?
          の名前を何に変更しますか?

          A folder with the name already exists .

          有効な名前を入力してください
          重複の名前を入力してください
          有効な名前を入力してください
          マイソリューションページにを追加しようとしています. 続行しますか?

          A folder with the name already exists .

          有効な名前を入力してください
          次のコピーを送信

          Oops, you have used your own email address! Please enter another email address to proceed.

          An active user does not exist under that email address. Please Click Here , to send a registration invitation to


          有効なメールアドレスを入力してください
          有効な名前を入力してください
          ダッシュボード情報を表示するには、ログインする必要があります
          Session expired due to inactivity, please login again
          カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
          アイテムがカートに正常に追加されました
          カートを表示
          DOWNLOAD TYPE:



          . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

          Minimum quantity should be

          SAP Material Number ISO製品型番 材種    
          Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

          You are about to leave the Solution building process.

          Are you sure you want to leave?