通知

すべて既読にする
Mobile Menu
Weldon®エンドミル • メトリック
Weldon®エンドミル • メトリック
Weldon®エンドミル • メトリック
Weldon®エンドミル • メトリック

VSM11™ • Weldon®エンドミル • メトリック

Weldon®エンドミル • メトリック

特徴と利点

  • 真の90°を加工可能。
  • 強化されたランピング機能。
  • 優れた壁面および表面仕上げ。
  • 効果的な内部クーラント機能、切れ刃へ正確に供給。

使用法と用途

  • フェイスミーリングフェイスミーリング
  • ヘリカルミーリングヘリカルミーリング
  • ランピング加工:ブランクランピング加工:ブランク
  • 溝加工:スクエアエンド溝加工:スクエアエンド
  • 側面加工/ショルダー加工:スクエアエンド側面加工/ショルダー加工:スクエアエンド
  • ポケット溝加工ポケット溝加工
  • ミーリング — スルークーラントミーリング — スルークーラント
  • シャンク — ストレートWeldonシャンク — ストレートWeldon

ワーク材料

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
フィルタを選択
Filters
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (16)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (16)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (16)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (16)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (16)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (16)
  • M Stainless Steel (16)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (16)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (16)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (16)
  • K Cast Iron (16)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (16)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (16)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (16)
  • N Non-Ferrous Materials (16)
    • N1
      Wrought Aluminum
      (16)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (16)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
  • S High-Temp Alloys (16)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (16)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (16)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (16)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (16)
  • H Hardened Materials (16)
    • H1
      Hardened Materials 44-48 HRC
      (16)
Select All Star
  • CN (9)
  • DE (9)
  • GB (1)
  • SG (1)
Applications
Applications
  • Face Milling Face Milling (9)
  • Pocket Pocket (9)
  • Pocket Helical Pocket Helical (9)
  • Pocket Milling Pocket Milling (9)
  • Ramping Ramping (9)
  • Shoulder Milling Shoulder Milling (9)
  • Shoulder Roughing Shoulder Roughing (9)
  • Shoulder Square End Shoulder Square End (9)
  • Slot Milling Slot Milling (9)
  • Slot Square End Slot Square End (9)
Cutting Diameter
Cutting Diameter
  • 0.473 in (1)
  • 0.63 in (2)
  • 0.709 in (1)
  • 0.787 in (3)
  • 0.866 in (1)
  • 0.984 in (3)
  • 1.181 in (1)
  • 1.26 in (4)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.0 mm (1)
  • 16.0 mm (2)
  • 18.0 mm (1)
  • 20.0 mm (3)
  • 22.0 mm (1)
  • 25.0 mm (3)
  • 30.0 mm (1)
  • 32.0 mm (4)
Cutting Diameter Min to Cutting Diameter Max
Cutting Length
Cutting Length
  • 11.451 mm (5)
  • 11.525 mm (6)
  • 11.55 mm (3)
  • 11.576 mm (1)
  • 11.701 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.451 in (5)
  • 0.454 in (6)
  • 0.455 in (3)
  • 0.456 in (1)
  • 0.461 in (1)
Cutting Length Min to Cutting Length Max
Reach
Reach
  • 0.828 in (4)
  • 1.181 in (4)
  • 1.22 in (4)
  • 1.536 in (3)
  • 1.575 in (1)
Reach Min to Reach Max
Reach
Reach
  • 21.0 mm (4)
  • 30.0 mm (4)
  • 31.0 mm (4)
  • 39.0 mm (3)
  • 40.0 mm (1)
Reach Min to Reach Max
Number of Flutes
Number of Flutes
  • 1 (1)
  • 2 (4)
  • 3 (5)
  • 4 (4)
  • 5 (2)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (16)
  • 2.0 (16)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (16)
  • 0.016 in (16)
  • 0.031 in (16)
  • 0.047 in (16)
  • 0.063 in (16)
  • 0.079 in (16)
  • 0.095 in (16)
  • 0.122 in (16)
  • 0.126 in (16)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (16)
  • 0.4 mm (16)
  • 0.775 mm (16)
  • 0.8 mm (16)
  • 1.201 mm (16)
  • 1.6 mm (16)
  • 2.0 mm (16)
  • 2.401 mm (16)
  • 3.1 mm (16)
  • 3.2 mm (16)
Corner Radius Min to Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WDN10U (16)
  • WK15CM (16)
  • WK15PM (16)
  • WN10HM (16)
  • WN25PM (16)
  • WP25PM (16)
  • WP35CM (16)
  • WP40PM (16)
  • WS30PM (16)
  • WS40PM (16)
  • WU20PM (16)
  • WU35PM (16)
Maximum Ramp Angle
Maximum Ramp Angle
  • 3.2 (1)
  • 3.6 (4)
  • 3.7 (1)
  • 5.3 (3)
  • 7.8 (3)
  • 10.0 (2)
Maximum Ramp Angle Min to Maximum Ramp Angle Max
frontEnd
Neck Diameter
Neck Diameter
  • 0.371 in (1)
  • 0.543 in (2)
  • 0.636 in (1)
  • 0.709 in (3)
  • 0.74 in (1)
  • 0.896 in (3)
  • 1.084 in (1)
  • 1.159 in (4)
Neck Diameter Min to Neck Diameter Max
Neck Diameter
Neck Diameter
  • 9.425 mm (1)
  • 13.8 mm (2)
  • 16.151 mm (1)
  • 18.0 mm (3)
  • 18.8 mm (1)
  • 22.75 mm (3)
  • 27.526 mm (1)
  • 29.451 mm (4)
Neck Diameter Min to Neck Diameter Max
Center Cutting
Center Cutting
backEnd
Back-End Diameter
Back-End Diameter
  • 12.0 mm (1)
  • 16.0 mm (4)
  • 20.0 mm (4)
  • 25.0 mm (5)
  • 32.0 mm (2)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (1)
  • 0.63 in (4)
  • 0.787 in (4)
  • 0.984 in (5)
  • 1.26 in (2)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
以下に示すパラメータのいずれかを使用して表示列を変更することができます。最大7列まで表示できます。
表示 1- 10 / 16 結果
列を選択
フィルタを選択
メートル
インチ
表示
メートル
インチ
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
5416454 VSM11D012Z01B16XD11 VSM11D012Z01B16XD11   12.0000 .4700 16.0 .63 70.0000 2.756 21.0000 .8270 11.7100 .4610 1 3.700 53100 Y 0.08
    定価:
    $245.90 /各
    価格::
    数量
    6616467 VSM11D016Z02B12XD11 VSM11D016Z02B12XD11   16.0000 .6200 12.0 .4724 67.0000 2.637 21.0000 .8386 11.5280 .4539 2 10.000 41400 Y 0.05
      定価:
      $258.03 /各
      価格::
      数量
      5416455 VSM11D016Z02B16XD11 VSM11D016Z02B16XD11   16.0000 .6200 16.0 .63 70.0000 2.756 21.0000 .8270 11.5300 .4540 2 10.000 41400 Y 0.09
        定価:
        $257.89 /各
        価格::
        数量
        6171449 VSM11D018Z02B16XD11 VSM11D018Z02B16XD11   18.0000 .7000 16.0 .63 70.0000 2.756 21.0000 .8270 11.5700 .4560 2   39000 Y 0.09
          定価:
          $257.89 /各
          価格::
          数量
          5416457 VSM11D020Z02B20XD11 VSM11D020Z02B20XD11   20.0000 .7800 20.0 .79 81.0000 3.189 30.0000 1.181 11.5500 .4550 2 7.800 35100 Y 0.15
            定価:
            $269.89 /各
            価格::
            数量
            6616468 VSM11D020Z03B16XD11 VSM11D020Z03B16XD11   20.0000 .7800 16.0 .6299 79.0000 3.110 30.0000 1.181 11.5540 .4549 3 7.800 35100 Y 0.11
              定価:
              $283.13 /各
              価格::
              数量
              5416458 VSM11D020Z03B20XD11 VSM11D020Z03B20XD11   20.0000 .7800 20.0 .79 81.0000 3.189 30.0000 1.181 11.5500 .4550 3 7.800 35100 Y 0.16
                定価:
                $275.88 /各
                価格::
                数量
                6171501 VSM11D022Z03B20XD11 VSM11D022Z03B20XD11   22.0000 .8600 20.0 .79 81.0000 3.189 30.0000 1.181 11.5300 .4540 3   33460 Y 0.17
                  定価:
                  $283.13 /各
                  価格::
                  数量
                  6616469 VSM11D025Z03B20XD11 VSM11D025Z03B20XD11   25.0000 .9800 20.0 .7874 82.0000 3.228 31.0000 1.220 11.5160 .4534 3 5.300 30200 Y 0.18
                    定価:
                    $287.72 /各
                    価格::
                    数量
                    5416459 VSM11D025Z03B25XD11 VSM11D025Z03B25XD11   25.0000 .9800 25.0 .98 88.0000 3.465 31.0000 1.220 11.5200 .4530 3 5.300 30200 Y 0.27
                      定価:
                      $287.86 /各
                      価格::
                      数量
                      5416480 VSM11D025Z04B25XD11 VSM11D025Z04B25XD11   25.0000 .9800 25.0 .98 88.0000 3.465 31.0000 1.220 11.5200 .4530 4 5.300 30200 Y 0.28
                        定価:
                        $293.87 /各
                        価格::
                        数量
                        5416481 VSM11D030Z04B25XD11 VSM11D030Z04B25XD11   30.0000 1.180 25.0 .98 88.0000 3.465 31.0000 1.220 11.4600 .4510 4 3.200 26900 Y 0.30
                          定価:
                          $305.87 /各
                          価格::
                          数量
                          6616470 VSM11D032Z04B25XD11 VSM11D032Z04B25XD11   32.0000 1.250 25.0 .9843 96.0000 3.779 40.0000 1.574 11.4440 .4506 4 3.600 25800 Y 0.35
                            定価:
                            $305.98 /各
                            価格::
                            数量
                            5416482 VSM11D032Z04B32XD11 VSM11D032Z04B32XD11   32.0000 1.250 32.0 1.26 100.0000 3.937 39.0000 1.535 11.4400 .4510 4 3.600 25800 Y 0.51
                              定価:
                              $305.87 /各
                              価格::
                              数量
                              6616481 VSM11D032Z05B25XD11 VSM11D032Z05B25XD11   32.0000 1.250 25.0 .9843 96.0000 3.779 39.0000 1.535 11.4440 .4506 5 3.600 25800 Y 0.36
                                定価:
                                $312.83 /各
                                価格::
                                数量
                                5416483 VSM11D032Z05B32XD11 VSM11D032Z05B32XD11   32.0000 1.250 32.0 1.26 100.0000 3.937 39.0000 1.535 11.4400 .4510 5 3.600 25800 Y 0.52
                                  定価:
                                  $311.87 /各
                                  価格::
                                  数量
                                  定価:
                                  割引: %
                                  価格::
                                  配置転換 この品目はありません
                                  交換品 この品目は、代理店経由で入手できる場合があります
                                  数量

                                  販売包装単位

                                  product-image
                                  Please adjust the following properties from

                                  ISO製品型番

                                  ANSI製品型番

                                  to find similar products.
                                  複製を作成しようとしています . 続行しますか?
                                  削除しようとしています 続行しますか?
                                  の名前を何に変更しますか?
                                  有効な名前を入力してください
                                  重複の名前を入力してください
                                  有効な名前を入力してください
                                  マイソリューションページにを追加しようとしています. 続行しますか?
                                  有効な名前を入力してください
                                  次のコピーを送信

                                  有効なメールアドレスを入力してください
                                  有効な名前を入力してください

                                  次のCAD図面が見つかりました

                                  お探しのファイルを一括して選択してダウンロードできます

                                  ダッシュボード情報を表示するには、ログインする必要があります
                                  Session expired due to inactivity, please login again
                                  カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
                                  アイテムがカートに正常に追加されました
                                  カートを表示
                                  DOWNLOAD TYPE:



                                  . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                  SAP Material Number ISO製品型番 材種    
                                  Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                                  You are about to leave the Solution building process.

                                  Are you sure you want to leave?