ISOとその他インサート

フィルタを選択
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (74)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (74)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (74)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (74)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (74)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (74)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (66)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (66)
  • M Stainless Steel (66)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (66)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (66)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (66)
  • K Cast Iron (98)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (98)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (98)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (98)
  • N Non-Ferrous Materials (51)
    • N1
      Wrought Aluminum (51)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (51)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (51)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (2)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
  • S High-Temp Alloys (60)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (37)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (37)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (37)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (60)
  • H Hardened Materials (28)
    • H1
      Hardened Materials 44-48 HRC (28)
Select All Star
  • DE (39)
  • IN (68)
  • US (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (7)
  • 2.0 (12)
  • 3.0 (33)
  • 4.0 (53)
  • 6.0 (1)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.0 in (77)
  • 0.03 in (3)
  • 0.031 in (9)
  • 0.044 in (1)
  • 0.06 in (2)
  • 0.063 in (5)
  • 0.075 in (1)
  • 0.125 in (2)
  • 0.197 in (2)
  • 0.237 in (2)
  • 0.315 in (1)
  • 1.969 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (77)
  • 0.75 mm (3)
  • 0.8 mm (9)
  • 1.1 mm (1)
  • 1.5 mm (2)
  • 1.6 mm (5)
  • 1.901 mm (1)
  • 3.176 mm (2)
  • 5.0 mm (2)
  • 6.0 mm (2)
  • 8.0 mm (1)
  • 50.0 mm (1)
Corner Radius Min to Corner Radius Max
Corner Chamfer
Corner Chamfer
  • 0.0 mm (50)
  • 0.701 mm (6)
  • 0.75 mm (4)
  • 1.0 mm (2)
  • 1.026 mm (5)
  • 1.05 mm (1)
  • 1.175 mm (3)
  • 1.201 mm (4)
  • 1.25 mm (3)
  • 1.401 mm (8)
  • 1.451 mm (4)
  • 1.475 mm (9)
  • 1.5 mm (6)
  • 2.575 mm (1)
Corner Chamfer Min to Corner Chamfer Max
Corner Chamfer
Corner Chamfer
  • 0.0 in (50)
  • 0.028 in (6)
  • 0.03 in (4)
  • 0.039 in (2)
  • 0.04 in (5)
  • 0.041 in (1)
  • 0.046 in (3)
  • 0.047 in (4)
  • 0.049 in (3)
  • 0.055 in (8)
  • 0.057 in (4)
  • 0.058 in (9)
  • 0.06 in (6)
  • 0.101 in (1)
Corner Chamfer Min to Corner Chamfer Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (20)
  • THM-F (2)
  • THR (1)
  • TN6525 (3)
  • TN6540 (8)
  • TTI25 (4)
  • TTM08 (7)
  • TTM09 (1)
  • WK15CM (9)
  • WP35CM (23)
  • WU20PM (28)
Wiper Insert
Wiper Insert
  • N (101)
  • Y (5)
frontEnd
Insert Shape
Insert Shape
  • A-PARALLELOGRAM 90 (12)
  • L-RECTANGLE 90 (3)
  • R-ROUND (5)
  • S-SQUARE 90 (52)
  • T-TRIANGLE 60 (34)
insertGeometry
Shape
Shape
  • A-PARALLELOGRAM 90 (12)
  • L-RECTANGLE 90 (3)
  • R-ROUND (5)
  • S-SQUARE 90 (52)
  • T-TRIANGLE 60 (34)
Insert IC Size
Insert IC Size
  • 6.351 mm (3)
  • 9.525 mm (14)
  • 10.0 mm (2)
  • 12.0 mm (2)
  • 12.701 mm (57)
  • 13.0 mm (1)
  • 13.4 mm (2)
  • 15.875 mm (9)
  • 16.0 mm (1)
Insert IC Size Min to Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.25 in (3)
  • 0.375 in (14)
  • 0.394 in (2)
  • 0.473 in (2)
  • 0.5 in (57)
  • 0.512 in (1)
  • 0.528 in (2)
  • 0.625 in (9)
  • 0.63 in (1)
Insert IC Size Min to Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 10.951 mm (2)
  • 11.0 mm (1)
  • 11.101 mm (2)
  • 11.201 mm (1)
  • 12.701 mm (39)
  • 13.4 mm (2)
  • 15.0 mm (2)
  • 15.875 mm (9)
  • 16.45 mm (8)
  • 16.5 mm (6)
  • 16.875 mm (2)
  • 17.0 mm (1)
  • 17.2 mm (3)
  • 17.225 mm (1)
  • 17.25 mm (1)
  • 21.951 mm (15)
  • 22.0 mm (1)
  • 22.5 mm (1)
Cutting Edge Length Min to Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.431 in (2)
  • 0.433 in (1)
  • 0.437 in (2)
  • 0.441 in (1)
  • 0.5 in (39)
  • 0.528 in (2)
  • 0.591 in (2)
  • 0.625 in (9)
  • 0.648 in (8)
  • 0.65 in (6)
  • 0.664 in (2)
  • 0.669 in (1)
  • 0.677 in (3)
  • 0.678 in (1)
  • 0.679 in (1)
  • 0.864 in (15)
  • 0.866 in (1)
  • 0.886 in (1)
Cutting Edge Length Min to Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • CA (1)
  • M0 (2)
  • M0T (1)
  • MM (12)
  • MS (14)
Cutting Tool Material
Cutting Tool Material
  • H T (4)
  • H W (101)
Tolerance Class
Tolerance Class
  • A (25)
  • C (5)
  • H (1)
  • K (56)
  • M (7)
  • P (12)
No filters matching ""
マイソリューションページにを追加しようとしています. 続行しますか?
product-image
Please adjust the following properties from

ISO製品型番

ANSI製品型番

to find similar products.

The following files are available

Please select a file to download

Models

ダッシュボード情報を表示するには、ログインする必要があります
Session expired due to inactivity, please login again
カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
アイテムがカートに正常に追加されました
カートを表示

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO製品型番 材種    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?