M200™ 3/4 • Double-Sided Round Inserts

フィルタを選択
フィルタ
    フィルタ表示
    メートル
    インチ
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (15)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(15)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(15)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(15)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(15)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(15)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(15)
    • M Stainless Steel (15)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(15)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(15)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(15)
    • K Cast Iron (12)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(12)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(12)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(12)
    • S High-Temp Alloys (15)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(14)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(14)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(14)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(15)
    • H Hardened Materials (10)
      • H1
        Hardened Materials 44-48 HRC(10)
    Applications
    Applications
    • Face MillingFace Milling (8)
    • PocketPocket (8)
    • Pocket MillingPocket Milling (8)
    • Profile MillingProfile Milling (8)
    • RampingRamping (8)
    • Shoulder Ball NoseShoulder Ball Nose (8)
    • Shoulder MillingShoulder Milling (8)
    • Shoulder RoughingShoulder Roughing (8)
    • Slot MillingSlot Milling (8)
    • Slot Square EndSlot Square End (8)
    Cutting Diameter
    Cutting Diameter
    • 1.248 in(1)
    • 1.748 in(1)
    • 2.248 in(1)
    • 3.248 in(2)
    • 4.248 in(2)
    • 5.248 in(1)
    Cutting Diameter MintoCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 31.701 mm(1)
    • 44.401 mm(1)
    • 57.1 mm(1)
    • 82.5 mm(2)
    • 107.9 mm(2)
    • 133.3 mm(1)
    Cutting Diameter MintoCutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 50.801 mm(1)
    • 63.5 mm(1)
    • 76.2 mm(1)
    • 101.601 mm(2)
    • 127.0 mm(2)
    • 152.4 mm(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Maximum Cutting Diameter
    Maximum Cutting Diameter
    • 2.0 in(1)
    • 2.5 in(1)
    • 3.0 in(1)
    • 4.0 in(2)
    • 5.0 in(2)
    • 6.0 in(1)
    Maximum Cutting Diameter MintoMaximum Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 9.5 mm(8)
    Cutting Length MintoCutting Length Max
    Cutting Length
    Cutting Length
    • 0.374 in(8)
    Cutting Length MintoCutting Length Max
    Reach
    Reach
    • 2.0 in(7)
    • 2.5 in(1)
    Reach MintoReach Max
    Reach
    Reach
    • 50.801 mm(7)
    • 63.5 mm(1)
    Reach MintoReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (8)
    Tool Cutting Edge Angle MintoTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (7)
    • Weldon (1)
    Number of Flutes
    Number of Flutes
    • 3 (1)
    • 4 (1)
    • 5 (2)
    • 6 (2)
    • 8 (2)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.0 in(6)
    • 2.5 in(1)
    • 4.69 in(1)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 50.801 mm(6)
    • 63.5 mm(1)
    • 119.125 mm(1)
    Over All Length [L] MintoOver All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • WK15CM (9)
    • WP25PM (10)
    • WP35CM (9)
    • WP40PM (10)
    • WU35PM (10)
    Hand Of Tool
    Hand Of Tool
    • R (8)
    Wiper Insert
    Wiper Insert
    • N (8)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.5 (1)
    • 0.6 (2)
    • 0.7 (2)
    • 0.9 (1)
    • 1.2 (1)
    • 1.3 (1)
    Maximum Ramp Angle MintoMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 1.375 in(1)
    Neck Diameter MintoNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 34.926 mm(1)
    Neck Diameter MintoNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • R-ROUND (8)
    Insert IC Size
    Insert IC Size
    • 19.05 mm(8)
    Insert IC Size MintoInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.75 in(8)
    Insert IC Size MintoInsert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • ML (3)
    • MM (5)
    Cutting Tool Material
    Cutting Tool Material
    • H W (8)
    Tolerance Class
    Tolerance Class
    • G (8)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (1)
    • SHELL MILL (7)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(1)
    • 25.401 mm(1)
    • 31.75 mm(2)
    • 38.1 mm(4)
    Back-End Diameter MintoBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(1)
    • 1.0 in(1)
    • 1.25 in(2)
    • 1.5 in(4)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    マイソリューションページにを追加しようとしています. 続行しますか?
    product-image
    Please adjust the following properties from

    ISO製品型番

    ANSI製品型番

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    ダッシュボード情報を表示するには、ログインする必要があります
    Session expired due to inactivity, please login again
    カートに追加しようとした製品()はありません カスタマーサービスにお問い合わせください。
    アイテムがカートに正常に追加されました
    カートを表示

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material NumberISO製品型番材種  

    You are about to leave the Solution building process.

    Are you sure you want to leave?