Country

言語

測定の単位

定価:

割引: %

定価:

$670.70 /各

価格::

数量

お問い合わせ

SDS

3/4" • Weldon® Shank

Name: 3/4" • Weldon® Shank
SKU: 6009950
Rating: 0 (0 reviews)

3/4″ • Weldon® Shanks

メートル

インチ

SAP Material Number	6009950
ISO Catalog Number	M200D200Z03W150RN64
ANSI Catalog Number	M200D200Z03W150RN64
[D] Adapter / Shank / Bore Diameter	38.09 mm
[D] Adapter / Shank / Bore Diameter	1.5 in
[D1] Effective Cutting Diameter	31.7 mm
[D1] Effective Cutting Diameter	1.25 in
[L] Overall Length	119.13 mm
[L] Overall Length	4.69 in
[D1MAX] Maximum Cutting Diameter	50.8 mm
[D1MAX] Maximum Cutting Diameter	2 in
Weight Pounds	2
[AP1MAX] 1st Maximum Cutting Depth	9.5 mm
[AP1MAX] 1st Maximum Cutting Depth	.37 in
Coolant Supply	Y
Maximum Ramping Angle	1.3
Max RPM	19000
Number of Inserts	3

すべての改良品を表示

使用法と用途

シャンク — ストレートWeldon 2 フラット
3Dプロファイル加工
側面加工／ショルダー加工：ボールノーズ
溝加工：スクエアエンド
フェイスミーリング
ポケット溝加工
ミーリング — スルークーラント
36310

ワーク材料

P Steel

M Stainless Steel

K Cast Iron

S High-Temp Alloys

H Hardened Materials

特徴と利点

Double-sided, 12 cutting edges.

Anti-rotation feature for better stability and higher feed rates.

Excellent for heavy roughing and semi-finishing of all materials.

Suitable for high-feed face milling operations.

Insert Selection Guide • M200™ Series • Large IC Expansion

	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.E..ML	WP25PM	.S..MM	WP40PM	.S..MM	WP40PM
P3–P4	.E..ML	WP25PM	.S..MM	WP40PM	.S..MM	WP40PM
P5–P6	.E..ML	WP25PM	.S..MM	WP35CM	.S..MM	WP35CM
M1–M2	.E..ML	WP25PM	.S..MM	WU35PM	.S..MM	WU35PM
M3	.E..ML	WP25PM	.S..MM	WU35PM	.S..MM	WU35PM
K1–K2	–	–	.S..MM	WK15CM	–	–
K3	–	–	.S..MM	WK15CM	–	–
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	.E..ML	WP25PM	.S..MM	WU35PM	.S..MM	WU35PM
S3	.E..ML	WP25PM	.S..MM	WU35PM	.S..MM	WU35PM
S4	.E..ML	WP25PM	.S..MM	WU35PM	.S..MM	WU35PM
H1	–	–	.S..MM	WP25PM	–	–

	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
.E..ML	.003	.009	.016	.003	.007	.012	.002	.006	.010	.002	.006	.010	.002	.005	.009	.E..ML
.S..MM	.007	.015	.027	.005	.011	.020	.005	.010	.017	.004	.009	.016	.004	.009	.016	.S..MM

	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
.E..ML	.004	.011	.020	.003	.008	.015	.003	.007	.013	.003	.007	.012	.003	.007	.012	.E..ML
.S..MM	.009	.019	.034	.006	.014	.025	.006	.012	.021	.005	.011	.020	.005	.011	.020	.S..MM

	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
.E..ML	.008	.021	.037	.006	.016	.027	.005	.014	.023	.005	.013	.022	.005	.012	.021	.E..ML
.S..MM	.016	.035	.065	.012	.025	.046	.010	.022	.040	.010	.020	.037	.009	.020	.036	.S..MM

Light Machining

General Purpose

Heavy Machining

	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
Insert Geometry	10%			20%			30%			40%			50–100%			Insert Geometry
.E..ML	.006	.015	.027	.004	.011	.020	.004	.010	.017	.004	.009	.016	.003	.009	.016	.E..ML
.S..MM	.012	.025	.046	.009	.018	.033	.007	.016	.029	.007	.015	.027	.007	.015	.026	.S..MM

Recommended Starting Speeds [SFM]

Material Group		WK15CM			WP25PM			WU35PM			WP35CM			WP40PM
P	1	–	–	–	1295	1120	1060	1025	905	845	1790	1555	1460	1165	1025	965
	2	–	–	–	1080	940	785	865	750	630	1105	1000	905	985	845	710
	3	–	–	–	1000	845	690	785	670	550	1000	905	805	905	770	630
	4	–	–	–	890	725	590	710	590	475	750	690	630	805	670	535
	5	–	–	–	725	670	590	590	535	475	1025	905	830	670	610	535
	6	–	–	–	650	490	395	510	395	310	630	535	430	590	450	355
M	1	–	–	–	805	710	650	670	590	535	805	725	610	770	670	610
	2	–	–	–	725	630	510	610	510	430	725	630	550	690	590	490
	3	–	–	–	550	475	370	450	395	310	570	510	450	510	450	355
K	1	1655	1520	1340	905	805	725	–	–	–	1165	1045	940	–	–	–
	2	1320	1165	1080	710	630	590	–	–	–	925	830	750	–	–	–
	3	1105	985	905	590	535	475	–	–	–	770	690	630	–	–	–
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	155	140	95	140	120	95	–	–	–	155	140	120
	2	–	–	–	155	140	95	140	120	95	–	–	–	155	140	120
	3	–	–	–	200	155	95	180	140	95	–	–	–	200	155	120
	4	–	–	–	275	200	140	235	180	120	260	200	130	260	200	140
H	1	–	–	–	475	355	275	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

スペア部品 for 3/4" • Weldon® Shank

MS1160

TT20

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO製品型番	材種

ようこそ

設定をご確認ください

設定の更新

提案製品

Product Family suggestions

専門家とのチャット

メッセージを送信する

専門家とのチャット

メッセージを送信する

ソリューション編集

ソリューション追加