定価:

割引: %

定価:

$211.67 /各

価格::

数量

お問い合わせ

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

SDS

ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

Name: ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch
SKU: 6853367

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

メートル

インチ

SAP Material Number	6853367
ISO Catalog Number	3A09E19009RET
ANSI Catalog Number	3A09E19009RET
Grade	UNCOATED
Adapter Style Machine Side	Straight-Cylindrical
[D1] Effective Cutting Diameter	19.0500 mm
[D1] Effective Cutting Diameter	.7500 in
[D] Adapter / Shank / Bore Diameter	19.05 mm
[D] Adapter / Shank / Bore Diameter	.75 in
[AP1MAX] 1st Maximum Cutting Depth	41.2750 mm
[AP1MAX] 1st Maximum Cutting Depth	1.625 in
[L] Overall Length	101.6000 mm
[L] Overall Length	4.000 in
[Re] Corner Radius	0.7620 mm
[Re] Corner Radius	.0300 in
[Z] Number of Flutes	3

すべての改良品を表示

使用法と用途

プランジミーリング
ランピング加工：ブランク
Drilling
Trochoidal Milling
ヘリカルミーリング
溝加工：スクエアエンド
側面加工／ショルダー加工：スクエアエンド

ワーク材料

N Non-Ferrous

等級

UNCOATED

N Non-Ferrous

Grupa materiałowa		Helical Interpolation / Ramping 0° - 15°	<="" td="">		<="" td="">	<="" td="" />
			NIEPOWLEKANE			Zalecane posuwy na obrót
			Prędkość skrawania Vc m/min			średnica
			min.	Początek	maks.	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	min.	Początek	maks.	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	1.25 x D1	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	1.25 x D1	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	1.25 x D1	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	1.25 x D1	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

Grupa materiałowa		Helical Interpolation / Ramping 15° - 30°	<="" td="">		<="" td="">	<="" td="" />
			NIEPOWLEKANE			Zalecane posuwy na obrót
			Prędkość skrawania Vc m/min			średnica
			min.	Początek	maks.	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	min.	Początek	maks.	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1500	1800	4800	IPT	.0006	.0013	.0016	.0019	.0026	.0032	.0039	.0045	.0052	.0058	.0065	.0081
	2	1.25 x D1	1500	1800	3600	IPT	.0006	.0012	.0014	.0018	.0023	.0029	.0035	.0041	.0047	.0053	.0058	.0073
	3	1.25 x D1	1500	1800	3600	IPT	.0005	.0009	.0011	.0014	.0018	.0023	.0027	.0032	.0036	.0041	.0045	.0057
	4	1.25 x D1	1200	1350	1800	IPT	.0005	.0009	.0011	.0014	.0018	.0023	.0027	.0032	.0036	.0041	.0045	.0057
	5	1.25 x D1	750	1200	2400	IPT	.0006	.0012	.0015	.0018	.0023	.0029	.0035	.0041	.0047	.0053	.0058	.0073

Grupa materiałowa		Helical Interpolation / Ramping 30° - 45°	<="" td="">		<="" td="">	<="" td="" />
			NIEPOWLEKANE			Zalecane posuwy na obrót
			Prędkość skrawania Vc m/min			średnica
			min.	Początek	maks.	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
		Max Depth	min.	Początek	maks.	Decimals	.180-.180	.180-.297	.216-.356	.288-.475	.359-.594	.431-.713	.575-.950	.633-1.047	.719-1.188	.814-1.346	.863-1.425	1.150-1.900
N	1	1.25 x D1	1260	1500	2400	IPT	.0005	.0010	.0013	.0016	.0021	.0026	.0031	.0036	.0042	.0047	.0052	.0065
	2	1.25 x D1	1260	1500	2400	IPT	.0005	.0009	.0011	.0014	.0019	.0023	.0028	.0033	.0037	.0042	.0047	.0058
	3	1.25 x D1	1260	1500	2400	IPT	.0004	.0007	.0009	.0011	.0015	.0018	.0022	.0025	.0029	.0033	.0036	.0045
	4	1.25 x D1	1020	1140	1350	IPT	.0004	.0007	.0009	.0011	.0015	.0018	.0022	.0025	.0029	.0033	.0036	.0045
	5	1.25 x D1	630	1020	1800	IPT	.0005	.0009	.0012	.0014	.0019	.0023	.0028	.0033	.0037	.0042	.0047	.0058

Grupa materiałowa		<="" td="">		<="" td="">	<="" td="" />
		Frezowanie wgłębne			NIEPOWLEKANE			Zalecane posuwy na obrót
					Prędkość skrawania Vc SFM				D1 Średnica
		Max Depth	Applicable	Coolant	min.	Początek	maks.	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	1.5 x D		Required	360	780	1200	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	2	1.5 x D		Required	360	750	840	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	3	1.5 x D		Required	300	600	780	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118
	4	1 x D		Required	180	450	780	IPR	.0024	.0031	.0039	.0047	.0055	.0063	.0079	.0083	.0087	.0093	.0098	.0110
	5	1.5 x D		Required	180	600	1200	IPR	.0031	.0047	.0053	.0059	.0063	.0079	.0087	.0093	.0098	.0104	.0110	.0118

Grupa materiałowa		<="" td="">		<="" td="">	<="" td="" />
		Frezowanie wgłębne			NIEPOWLEKANE			Zalecane posuwy na obrót
					Prędkość skrawania Vc SFM				D1 Średnica
		Max Depth	Applicable	Coolant	min.	Początek	maks.	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	1,5 x D		Required	360	780	1200	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	2	1,5 x D		Required	360	750	840	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	3	1,5 x D		Required	300	600	780	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083
	4	1 x D		Required	180	450	780	IPR	.0017	.0022	.0028	.0033	.0039	.0044	.0055	.0058	.0061	.0065	.0069	.0077
	5	1,5 x D		Required	180	600	1200	IPR	.0022	.0033	.0037	.0041	.0044	.0055	.0061	.0065	.0069	.0073	.0077	.0083

Grupa materiałowa		<="" td="">		<="" td="">	<="" td="" />
		Frezowanie walcowe (A) i Frezowanie rowków (B)			NIEPOWLEKANE			Recommended feed per tooth (Fz = IPT) for side milling (A). For slotting (B), reduce Fz by 20%.
		A		B	Prędkość skrawania Vc SFM				D1 Średnica
		ap	ae	ap	min.	Początek	maks.	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	Ap1 max	0,5 x D1	1 x D	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	Ap1 max	0,5 x D1	1 x D	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	Ap1 max	0,5 x D1	1 x D	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	Ap1 max	0,5 x D1	1 x D	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	Ap1 max	0,5 x D1	1 x D	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

Grupa materiałowa		<="" td="">		<="" td="">	<="" td="" />
		Frezowanie walcowe (A) i Frezowanie rowków (B)			NIEPOWLEKANE			Recommended feed per tooth (Fz = IPT) for side milling (A). For slotting (B), reduce Fz by 20%.
		A		B	Prędkość skrawania Vc SFM				D1 Średnica
		ap	ae	ap	min.	Początek	maks.	Fraction	1/8	5/32	3/16	1/4	5/16	3/8	1/2	9/16	5/8	23/32	3/4	1
N	1	Ap1 max	0,5 x D1	1 x D1	1500	1800	6000	IPT	.0009	.0017	.0022	.0026	.0035	.0043	.0052	.0060	.0069	.0078	.0087	.0108
	2	Ap1 max	0,5 x D1	1 x D1	1500	1800	4500	IPT	.0008	.0016	.0019	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097
	3	Ap1 max	0,5 x D1	1 x D1	1500	1800	4500	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	4	Ap1 max	0,5 x D1	1 x D1	1200	1350	2250	IPT	.0006	.0012	.0015	.0018	.0024	.0030	.0036	.0042	.0048	.0054	.0061	.0076
	5	Ap1 max	0,5 x D1	1 x D1	750	1200	3000	IPT	.0008	.0016	.0020	.0023	.0031	.0039	.0047	.0054	.0062	.0070	.0078	.0097

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO製品型番	材種

提案製品

Product Family suggestions

通知

ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

使用法と用途

ワーク材料

等級

提案製品

Product Family suggestions

New Customer

Registered Customer

New Customer

Registered Customer

通知

ALUFLASH • Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

ALUFLASH™ Series 3A09 • Radius • 3 Flute • Regular Length • Cylindrical Shank • Inch

使用法と用途

ワーク材料

等級

次のCAD図面が見つかりました