Country

言語

測定の単位

定価:

割引: %

価格::

この品目はありません
この品目は、代理店経由で入手できる場合があります

数量

M1200 HD • シェルミル

Name: M1200 HD • シェルミル
SKU: 4147886
Rating: 0 (0 reviews)

Victory M1200 HD • シェルミル

メートル

インチ

SAP Material Number	4147886
ISO Catalog Number	M1200HD600Z09S200HN09
ANSI Catalog Number	M1200HD600Z09S200HN09
[D1] Effective Cutting Diameter	152.4 mm
[D1] Effective Cutting Diameter	6 in
[D1MAX] Maximum Cutting Diameter	160.9 mm
[D1MAX] Maximum Cutting Diameter	6.335 in
[D] Adapter / Shank / Bore Diameter	50.8 mm
[D] Adapter / Shank / Bore Diameter	2 in
[D6] Hub Diameter	119.95 mm
[D6] Hub Diameter	4.722 in
[L] Overall Length	60.452 mm
[L] Overall Length	2.38 in
[AP1MAX] 1st Maximum Cutting Depth	6 mm
[AP1MAX] 1st Maximum Cutting Depth	.236 in
Number of Inserts	9
Max RPM	4100
Coolant Supply	Y
Weight Pounds	9.26

すべての改良品を表示

使用法と用途

フェイスミーリング
側面加工／ショルダー加工：緩やかな面取り
ミーリング — スルークーラント
ミーリング — 側面および正面

ワーク材料

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

特徴と利点

12枚刃。
標準インサートで、より高いAp1最大値。
低い切削抵抗により最高の生産性を実現。

機械側

荷重...

ワーク側

荷重...

インサート選択の手引き

Material Group	Light Machining		General Purpose		Heavy Machining		Universal
	Geometry	Grade	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	.E..LD	WP40PM	.S..GD	WP40PM	.S..HD	WP40PM	.S..MM	WU20PM
P3–P4	.E..LD	WP25PM	.S..GD	WP35CM	.S..HD	WP35CM	.S..MM	WU20PM
P5–P6	.E..LD	WP25PM	.S..GD	WP35CM	.S..HD	WP35CM	.S..MM	WP35CM
M1–M2	.E..LD	WP25PM	.S..GD	WP25PM	.S..HD	WP25PM	.S..MM	WU20PM
M3	.E..LD	WP35CM	.S..GD	WP35CM	.S..HD	WP35CM	.S..MM	WP35CM
K1–K2	.E..LD	TN6520	.S..GD	WK15CM	.S..HD	WK15CM	.S..MM	WK15CM
K3	.E..LD	WP35CM	.S..GD	WP35CM	.S..HD	WP35CM	.S..MM	WP35CM
N1–N2	.F..LDJ	TN6501	.F..LDJ	TN6501	.F..LDJ	TN6501
N3	.F..LDJ	TN6501	.F..LDJ	TN6501	.F..LDJ	TN6501
S1–S2	.E..LD	WS30PM	.S..GD	WS30PM	.S..HD	WS40PM	.S..MM	WU20PM
S3	.E..LD	WS30PM	.S..GD	WS30PM	.S..HD	WS40PM	.S..MM	WU20PM
S4	.E..LD	WS30PM	.S..GD	WS30PM	.S..HD	WS40PM	.S..MM	WU20PM

推奨フィード量の開始値［mm］

Light Machining

General Purpose

Heavy Machining

M1200 15º Lead • Recommended Starting Feeds [mm/th]
Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
	30%			40 100 %
	L	M	H	L	M	H
.F..LDJ	0,22	0,42	0,83	0,21	0,38	0,76
.E..LD	0,22	0,64	1,28	0,21	0,59	1,17
.S..GD	0,43	1,07	1,72	0,39	0,98	1,57
.S..HD	0,43	1,07	1,72	0,39	0,98	1,57
.S..Ceramic	–	–	–	–	–	–
.S..MM	0,43	1,07	1,72	0,39	0,98	1,57
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

Light Machining

General Purpose

Heavy Machining

M1200 15º Lead • Recommended Starting Feeds [IPT]
Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)
	30%			40 100 %
	L	M	H	L	M	H
.F..LDJ	0.008	0.017	0.034	0.008	0.015	0.031
.E..LD	0.008	0.025	0.051	0.008	0.023	0.046
.S..GD	0.017	0.042	0.068	0.015	0.039	0.062
.S..HD	0.017	0.042	0.068	0.015	0.039	0.062
.S..Ceramic	–	–	–	–	–	–
.S..MM	0.017	0.042	0.068	0.015	0.039	0.062
L = Light Machining; M = Medium Machining; H = Heavy Machining NOTE: Use "Light Machining" values as starting feed rate.

推奨切削速度の開始値［m/min］

M1200 • Recommended Starting Speeds [m/min]

Grade

THM-U

TN6501

TN6510

TN6520

TN6525

TN6540

WK15CM

Chip Thickness hex mm

Min

Max

Min

Max

Min

Max

Min

Max

Min

Max

Min

Max

Min

Max

Material Group

Max

Start

Min

Max

Start

Min

Max

Start

Min

Max

Start

Min

Max

Start

Min

Max

Start

Min

Max

Start

Min

–

410

320

280

360

280

240

–

320

250

215

250

190

170

–

280

215

185

215

170

140

–

235

170

145

180

130

110

–

310

235

200

240

180

150

–

205

160

130

160

120

100

–

190

120

130

–

120

–

125

–

480

350

260

450

320

230

275

245

220

205

180

505

460

410

–

420

280

205

390

250

190

215

190

180

175

155

140

400

355

330

–

335

260

200

300

230

160

180

160

145

155

145

125

335

300

275

2400

1440

1200

2400

1440

1200

–

1640

980

800

1640

980

800

–

960

600

480

960

600

480

–

Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

M1200 • Recommended Starting Speeds [m/min]
Grade		WP25PM			WP35CM			WP40PM			WS30PM			WS40PM			WU20PM			WK25YM
Chip Thickness hex mm		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	395	340	325	545	475	445	355	310	295	–	–	–	–	–	–	330	290	270	–	–	–
	2	330	290	240	335	305	275	300	260	215	–	–	–	–	–	–	275	250	200	–	–	–
	3	305	260	210	305	275	245	275	235	190	–	–	–	–	–	–	255	220	175	–	–	–
	4	270	220	180	230	210	190	245	205	160	–	–	–	–	–	–	225	190	150	–	–	–
	5	220	205	180	310	275	250	205	185	160	–	–	–	205	175	145	185	175	150	–	–	–
	6	200	150	120	190	160	130	180	140	110	–	–	–	180	130	95	165	130	100	–	–	–
M	1	245	215	200	245	220	185	235	205	185	270	240	220	250	205	170	205	180	165	–	–	–
	2	220	190	155	220	190	170	210	180	150	245	215	175	215	175	145	185	160	130	–	–	–
	3	170	145	115	175	155	140	155	140	110	185	160	125	175	130	100	140	120	95	–	–	–
K	1	275	245	220	355	320	290	–	–	–	–	–	–	–	–	–	250	220	185	965	880	780
	2	215	190	180	280	250	230	–	–	–	–	–	–	–	–	–	200	180	150	765	685	635
	3	180	160	145	235	210	190	–	–	–	–	–	–	–	–	–	180	150	120	645	570	525
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	550	470	400	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	550	470	400	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	400	350	300	–	–	–
S	1	50	40	30	–	–	–	50	40	35	55	50	35	50	40	30	40	35	25	–	–	–
	2	50	40	30	–	–	–	50	40	35	55	50	35	50	40	30	40	35	25	–	–	–
	3	60	50	30	–	–	–	60	50	35	65	55	35	60	50	30	50	40	25	–	–	–
	4	85	60	40	80	60	40	80	60	40	100	70	50	70	60	35	70	50	35	–	–	–
H	1	145	110	85	–	–	–	–	–	–	–	–	–	–	–	–	110	80	70	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

M1200 • Recommended Starting Speeds [SFM]

Grade

THM-U

TN6501

TN6510

TN6520

TN6525

TN6540

WK15CM

Chip Thickness hex Inch

Min

Max

Min

Max

Min

Max

Min

Max

Min

Max

Min

Max

Min

Max

Material Group

Max

Start

Min

Max

Start

Min

Max

Start

Min

Max

Start

Min

Max

Start

Min

Max

Start

Min

Max

Start

Min

–

1340

1045

925

1180

925

785

–

1045

830

710

830

630

550

–

925

710

610

710

550

450

–

770

550

475

590

430

355

–

1025

770

650

785

590

490

–

670

535

430

535

395

335

–

630

395

260

430

260

200

–

395

260

155

260

155

140

–

415

260

180

275

155

140

–

1570

1140

845

1475

1045

750

905

805

725

670

590

1655

1520

1340

–

1380

925

670

1280

830

630

710

630

590

570

510

450

1320

1165

1080

–

1105

845

650

985

750

535

590

535

475

510

475

415

1105

985

905

7870

4720

3935

7870

4720

3935

–

5370

3210

2615

5370

3210

2615

–

3150

1970

1570

3150

1970

1570

–

155

120

–

235

140

–

200

–

M1200 • Recommended Starting Speeds [SFM]
Grade		WP25PM			WP35CM			WP40PM			WS30PM			WS40PM			WU20PM			WK25YM
Chip Thickness hex Inch		Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max	Min		Max
Material Group		Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min	Max	Start	Min
P	1	1295	1120	1060	1790	1555	1460	970	855	805	–	–	–	–	–	–	1080	950	890	–	–	–
	2	1080	940	785	1105	1000	905	820	705	590	–	–	–	–	–	–	900	820	660	–	–	–
	3	1000	845	690	1000	905	805	755	640	525	–	–	–	–	–	–	840	720	570	–	–	–
	4	890	725	590	750	690	630	675	560	445	–	–	–	–	–	–	740	620	490	–	–	–
	5	725	670	590	1025	905	830	560	510	445	–	–	–	560	475	395	610	570	490	–	–	–
	6	650	490	395	630	535	430	490	375	295	–	–	–	490	360	260	540	430	330	–	–	–
M	1	805	710	650	805	725	610	640	560	510	890	785	725	690	560	460	670	590	540	–	–	–
	2	725	630	510	725	630	550	575	490	410	805	710	570	590	475	395	610	520	430	–	–	–
	3	550	475	370	570	510	450	425	375	295	610	535	415	475	360	280	460	390	310	–	–	–
K	1	905	805	725	1165	1045	940	–	–	–	–	–	–	–	–	–	820	720	610	3170	2880	2560
	2	710	630	590	925	830	750	–	–	–	–	–	–	–	–	–	660	590	490	2510	2240	2090
	3	590	535	475	770	690	630	–	–	–	–	–	–	–	–	–	590	490	390	2110	1870	1720
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	1800	1540	1310	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	1800	1540	1310	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	1310	1150	980	–	–	–
S	1	155	140	95	–	–	–	–	–	–	180	155	120	130	115	80	130	110	80	–	–	–
	2	155	140	95	–	–	–	–	–	–	180	155	120	130	115	80	130	110	80	–	–	–
	3	200	155	95	–	–	–	–	–	–	215	180	120	165	130	80	160	130	80	–	–	–
	4	275	200	140	260	200	130	–	–	–	335	235	155	195	165	100	230	160	110	–	–	–
H	1	475	355	275	–	–	–	–	–	–	–	–	–	–	–	–	360	260	230	–	–	–
Recommended Starting Speed are pointing to 90° Shoulder Milling . Starting Speed for Face and Copy Milling can be Increased by 20 %. As the average chip thickness increases, speed should be decreased. Material groups P, M, K and H show recommended starting speeds for dry machining. For wet machining, reduce speed by 20%. Material groups N and S show recommended starting speeds for wet machining. Not recommended for dry machining.

スペア部品 for M1200 HD • シェルミル

Spare Part ANTI-SEIZE LUBRICANT

TORX DRIVER - 12148082400

insert screw

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO製品型番	材種

ようこそ

設定をご確認ください

設定の更新

提案製品

Product Family suggestions

営業チームにお問い合わせください

営業チームにお問い合わせください

ソリューション編集

ソリューション追加

M1200 HD • シェルミル

Victory M1200 HD • シェルミル

使用法と用途

ワーク材料

特徴と利点

機械側

ワーク側

インサート選択の手引き

推奨フィード量の開始値［mm］

推奨切削速度の開始値［m/min］

スペア部品 for M1200 HD • シェルミル

提案製品

Product Family suggestions

営業チームにお問い合わせください

通知

営業チームにお問い合わせください

Sending to SolidCAM in progress...

M1200 HD • シェルミル

Victory M1200 HD • シェルミル

使用法と用途

ワーク材料

特徴と利点

機械側

ワーク側

インサート選択の手引き

推奨フィード量の開始値［mm］

推奨切削速度の開始値［m/min］

スペア部品 for M1200 HD • シェルミル

The following files are available