*に類似する製品:
M16 • CPNT • CP0602..
インサート
製品番号5578224
ISO カタログ IDCPNT080308TANSIカタログIDCPNT080308T
- P Steel
- M Stainless Steel
- S High-Temp Alloys
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
製品番号 | 5578224 |
ISO カタログ ID | CPNT080308T |
ANSIカタログID | CPNT080308T |
Grade | WP40PM |
Cutting Edges per Insert | 2 |
[D] Insert IC Size | 7.938 mm |
[D] Insert IC Size | .3125 in |
[L10] Insert Cutting Edge Length | 8.06 mm |
[L10] Insert Cutting Edge Length | .3173 in |
[M] Gage Dimension | 1.764 mm |
[M] Gage Dimension | .0703 in |
[S] Insert Thickness | 3.18 mm |
[S] Insert Thickness | .125 in |
[Rε] Corner Radius | 0.8 mm |
[Rε] Corner Radius | .0315 in |
Average Chip Thickness [HM] | 0.09 mm |
Average Chip Thickness [HM] | .0035 in |
ワーク材料
- Steel
- Stainless Steel
- High-Temp Alloys
送りと速度を計算するソリューションを作成する
ソリューションを作成したら、送りと速度アイコンを選択するだけで、システムが推奨事項を提供します。マシンと仕様を追加して情報をカスタマイズしたり、スライダーを使用して調整することもできます。
インサート選択
インサート選択の手引き
Material Group | Light | General | Heavy | |||
Geometry | Grade | Geometry | Grade | Geometry | Grade | |
P1–P2 | CPNT | WP40PM | CPNT | WP40PM | CPNT | WP40PM |
P3–P4 | CPNT | WP35CM | CPNT | WP35CM | CPNT | WP35CM |
P5–P6 | CPNT | WP35CM | CPNT | WP40PM | CPNT | WP40PM |
M1–M2 | CPNT | WP40PM | CPNT | WP40PM | CPNT | WP40PM |
M3 | CPNT | TN7535 | CPNT | WP35CM | CPNT | WP35CM |
K1–K2 | CPNT | WK15CM | CPNT | WK15CM | CPNT | WK15CM |
K3 | CPNT | WK15CM | CPNT | WP35CM | CPNT | WP35CM |
N1–N2 | – | – | – | – | – | – |
N3 | – | – | – | – | – | – |
S1–S2 | – | – | – | – | – | – |
S3 | – | – | – | – | – | – |
S4 | – | – | – | – | – | – |
H1 | – | – | – | – | – | – |
送り量
推奨フィード量の開始値[mm]
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
5 % | 10 % | 20 % | 30 % | 40 | ||||||||||||
CPNT06 | 0,12 | 0,29 | 0,46 | 0,09 | 0,21 | 0,33 | 0,07 | 0,16 | 0,25 | 0,06 | 0,14 | 0,22 | 0,05 | 0,13 | 0,20 | CPNT06 |
CPNT08 | 0,12 | 0,29 | 0,46 | 0,09 | 0,21 | 0,33 | 0,07 | 0,16 | 0,25 | 0,06 | 0,14 | 0,22 | 0,05 | 0,13 | 0,20 | CPNT08 |
CPNT09 | 0,12 | 0,29 | 0,46 | 0,08 | 0,21 | 0,33 | 0,06 | 0,16 | 0,25 | 0,06 | 0,14 | 0,22 | 0,05 | 0,13 | 0,20 | CPNT09 |
CPNT12 | 0,12 | 0,35 | 0,58 | 0,08 | 0,25 | 0,42 | 0,06 | 0,19 | 0,32 | 0,06 | 0,16 | 0,28 | 0,05 | 0,15 | 0,25 | CPNT12 |
Light | General | Heavy |
速度
推奨切削速度の開始値[m/min]
Material Group | THM | TTM08 | WK15CM | WP35CM | WP40PM | |||||||||||
P | 0 | – | – | – | – | – | – | – | – | – | 455 | 395 | 370 | 295 | 260 | 245 |
1 | – | – | – | 230 | 200 | 190 | – | – | – | 455 | 395 | 370 | 295 | 260 | 245 | |
2 | – | – | – | 195 | 170 | 140 | – | – | – | 280 | 255 | 230 | 250 | 215 | 180 | |
3 | – | – | – | 180 | 150 | 125 | – | – | – | 255 | 230 | 205 | 230 | 195 | 160 | |
4 | – | – | – | 160 | 130 | 105 | – | – | – | 190 | 175 | 160 | 205 | 170 | 135 | |
5 | – | – | – | – | – | – | – | – | – | 260 | 230 | 210 | 170 | 155 | 135 | |
6 | – | – | – | – | – | – | – | – | – | 160 | 135 | 110 | 150 | 115 | 90 | |
M | 1 | – | – | – | – | – | – | – | – | – | 205 | 185 | 155 | 195 | 170 | 155 |
2 | – | – | – | – | – | – | – | – | – | 185 | 160 | 140 | 175 | 150 | 125 | |
3 | – | – | – | – | – | – | – | – | – | 145 | 130 | 115 | 130 | 115 | 90 | |
K | 1 | 120 | 90 | 75 | – | – | – | 420 | 385 | 340 | 295 | 265 | 240 | – | – | – |
2 | 125 | 100 | 70 | – | – | – | 335 | 295 | 275 | 235 | 210 | 190 | – | – | – | |
3 | 130 | 95 | 60 | – | – | – | 280 | 250 | 230 | 195 | 175 | 160 | – | – | – | |
N | 1 | 900 | 600 | 500 | – | – | – | – | – | – | – | – | – | – | – | – |
2 | 685 | 465 | 385 | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | 450 | 280 | 200 | – | – | – | – | – | – | – | – | – | – | – | – | |
S | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 40 | 35 | 30 |
2 | – | – | – | – | – | – | – | – | – | – | – | – | 40 | 35 | 30 | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | 50 | 40 | 30 | |
4 | – | – | – | – | – | – | – | – | – | 66 | 50 | 33 | 65 | 50 | 35 | |
H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
I have read and accepted the Terms & Conditions of use