Country

言語

測定の単位

定価:

割引: %

定価:

$302.18 /各

価格::

数量

お問い合わせ

SDS

VXF™-07 • スクリューオンエンドミル • メトリック

Name: VXF™-07 • スクリューオンエンドミル • メトリック
SKU: 6597151
Rating: 0 (0 reviews)

スクリューオンエンドミル • メトリック

メートル

インチ

SAP Material Number	6597151
ISO Catalog Number	VXF020Z03M10XP07
ANSI Catalog Number	VXF020Z03M10XP07
[D1] Effective Cutting Diameter	10.699 mm
[D1] Effective Cutting Diameter	.4212 in
[D] Adapter / Shank / Bore Diameter	18 mm
[D] Adapter / Shank / Bore Diameter	.7087 in
[L2] Head Length	35 mm
[L2] Head Length	1.378 in
[G3X] Connection Thread Size External	M10
[AP1MAX] 1st Maximum Cutting Depth	0.9 mm
[AP1MAX] 1st Maximum Cutting Depth	.0354 in
[D1MAX] Maximum Cutting Diameter	20 mm
[D1MAX] Maximum Cutting Diameter	.7874 in
Coolant Supply	Y
[DPM] Pilot Diameter Machine Side	10.488 mm
[DPM] Pilot Diameter Machine Side	.4129 in
Maximum Ramping Angle	3.4
Max RPM	57000
Number of Inserts	3
[WF] Width of Flat	14.95 mm
[WF] Width of Flat	.5886 in
Weight Kilograms	0.07

すべての改良品を表示

使用法と用途

ポケット溝加工
100018357
ヘリカルミーリング
ランピング加工：ブランク
シャンク — スクリューオン
Inclined Square End Mill
プランジミーリング
Counter Boring
Spiral Circular

ワーク材料

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

インサート選択の手引き

	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	XPPT-MM	WP25PM	XPPT-MM	WS40PM	XPPW-MH	WP40PM
P3–P4	XPPT-MM	WP25PM	XPPT-MM	WS40PM	XPPW-MH	WP40PM
P5–P6	XPPT-MM	WP25PM	XPPT-MM	WS40PM	XPPW-MH	WP40PM
M1–M2	XPPT-MM	WS40PM	XPPT-MM	WS40PM	XPPW-MH	WP40PM
M3	XPPT-MM	WS40PM	XPPT-MM	WS40PM	XPPW-MH	WP40PM
K1–K2	XPPW-MH	WU10PM	XPPW-MH	WU10PM	XPPW-MH	WU10PM
K3	XPPW-MH	WU10PM	XPPW-MH	WU10PM	XPPW-MH	WU10PM
S1–S2	XPPT-MM	WP25PM	XPPT-MM	WS40PM	–	–
S3	XPPT-MM	WS40PM	XPPT-MM	WS40PM	–	–
S4	XPPT-MM	WS40PM	XPPT-MM	WS40PM	–	–
H1	XPPW-MH	WU10PM	XPPW-MH	WU10PM	–	–

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40–100 %
.E..MM	0,46	1,32	2,43	0,32	0,89	1,53	0,24	0,65	1,09	0,21	0,56	0,94	0,19	0,52	0,85	.E..MM
.S..MH	0,84	1,84	3,12	0,59	1,21	1,85	0,43	0,87	1,30	0,38	0,75	1,12	0,34	0,69	1,02	.S..MH

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40–100 %
.E..MM	0,42	1,21	2,20	0,30	0,83	1,41	0,22	0,60	1,01	0,19	0,52	0,87	0,18	0,48	0,79	.E..MM
.S..MH	0,78	1,68	2,79	0,55	1,12	1,71	0,40	0,81	1,21	0,35	0,70	1,04	0,32	0,64	0,94	.S..MH

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..MM	0,37	1,06	1,89	0,27	0,73	1,24	0,20	0,53	0,89	0,17	0,46	0,77	0,16	0,42	0,70	.E..MM
.S..MH	0,68	1,46	2,35	0,48	0,98	1,49	0,36	0,71	1,07	0,31	0,62	0,92	0,28	0,56	0,84	.S..MH

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..MM	.020	.058	.109	.014	.039	.067	.010	.028	.047	.009	.025	.041	.008	.022	.037	.E..MM
.S..MH	.036	.080	.141	.025	.052	.080	.019	.037	.056	.016	.032	.048	.015	.029	.043	.S..MH

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..MM	.018	.051	.094	.013	.035	.059	.009	.025	.042	.008	.022	.037	.007	.020	.033	.E..MM
.S..MH	.032	.070	.118	.023	.046	.071	.017	.033	.050	.014	.029	.043	.013	.026	.039	.S..MH

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..MM	.015	.043	.076	.011	.029	.050	.008	.022	.036	.007	.019	.031	.006	.017	.028	.E..MM
.S..MH	.027	.058	.093	.019	.039	.059	.014	.028	.042	.012	.024	.036	.011	.022	.033	.S..MH

推奨切削速度の開始値［m/min］*

Material Group		WP25PM			WP40PM			WS40PM			WU10PM
P	1	395	340	325	355	310	295	–	–	–	–	–	–
	2	330	290	240	300	260	215	–	–	–	–	–	–
	3	305	260	210	275	235	190	–	–	–	–	–	–
	4	270	220	180	245	205	160	–	–	–	–	–	–
	5	220	205	180	205	185	160	205	175	145	–	–	–
	6	200	150	120	180	140	110	180	130	95	–	–	–
M	1	245	215	200	235	205	185	250	205	170	–	–	–
	2	220	190	155	210	180	150	215	175	145	–	–	–
	3	170	145	115	155	140	110	175	130	100	–	–	–
K	1	275	245	220	–	–	–	–	–	–	355	320	290
	2	215	190	180	–	–	–	–	–	–	275	245	230
	3	180	160	145	–	–	–	–	–	–	235	210	190
S	1	50	40	30	50	40	35	50	40	30	–	–	–
	2	50	40	30	50	40	35	50	40	30	–	–	–
	3	60	50	30	60	50	35	60	50	30	–	–	–
	4	85	60	40	80	60	40	70	60	35	–	–	–
H	1	145	110	85	–	–	–	–	–	–	190	155	110

Recommended Starting Speeds [SFM]*

Material Group		WP25PM			WP40PM			WS40PM			WU10PM
P	1	1295	1115	1065	1165	1015	970	1085	920	785	–	–	–
	2	1085	950	785	985	855	705	900	805	605	–	–	–
	3	1000	855	690	900	770	625	835	705	540	–	–	–
	4	885	720	590	805	675	525	755	625	490	–	–	–
	5	720	675	590	675	605	525	675	575	475	–	–	–
	6	655	490	395	590	460	360	590	425	310	–	–	–
M	1	805	705	655	770	675	605	820	675	560	–	–	–
	2	720	625	510	690	590	490	705	575	475	–	–	–
	3	560	475	375	510	460	360	575	425	330	–	–	–
K	1	900	805	720	–	–	–	–	–	–	1165	1050	950
	2	705	625	590	–	–	–	–	–	–	900	805	755
	3	590	525	475	–	–	–	–	–	–	770	690	625
S	1	165	130	100	165	130	115	165	130	100	–	–	–
	2	165	130	100	165	130	115	165	130	100	–	–	–
	3	195	165	100	195	165	115	195	165	100	–	–	–
	4	280	195	130	260	195	130	230	195	115	–	–	–
H	1	475	360	280	–	–	–	–	–	–	625	510	360

スペア部品 for VXF™-07 • スクリューオンエンドミル • メトリック

Spare Part TORX DRIVER

Spare Part ANTI-SEIZE LUBRICANT

INSERT SCREW

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO製品型番	材種

ようこそ

設定をご確認ください

設定の更新

提案製品

Product Family suggestions

専門家とのチャット

メッセージを送信する

専門家とのチャット

メッセージを送信する

ソリューション編集

ソリューション追加