言語

測定の単位

定価:

割引: %

定価:

$443.12 /各

価格::

数量

お問い合わせ

Downloads SDS

VXF™-07 • Shell Mills • Inch

Name: VXF™-07 • Shell Mills • Inch
SKU: 6712975
Rating: 0 (0 reviews)

Shell Mills • Inch

メートル

インチ

SAP Material Number	6712975
ISO Catalog Number	VXF150Z05S075XP07
ANSI Catalog Number	VXF150Z05S075XP07
[D] Adapter / Shank / Bore Diameter	19.05 mm
[D] Adapter / Shank / Bore Diameter	.75 in
[D1] Effective Cutting Diameter	28.674 mm
[D1] Effective Cutting Diameter	1.128 in
[L] Overall Length	32 mm
[L] Overall Length	1.259 in
[D6] Hub Diameter	36 mm
[D6] Hub Diameter	1.417 in
[D1MAX] Maximum Cutting Diameter	38.1 mm
[D1MAX] Maximum Cutting Diameter	1.5 in
Weight Pounds	0.33
[AP1MAX] 1st Maximum Cutting Depth	0.9 mm
[AP1MAX] 1st Maximum Cutting Depth	.0354 in
Coolant Supply	Y
Maximum Ramping Angle	1
Max RPM	35800
Number of Inserts	5

すべての改良品を表示

使用法と用途

Counter Boring
Spiral Circular
ポケット溝加工
100018357
ヘリカルミーリング
プランジミーリング
ランピング加工：ブランク
Inclined Square End Mill
ミーリング — 側面および正面

ワーク材料

P Steel

M Stainless Steel

K Cast Iron

N Non-Ferrous

S High-Temp Alloys

H Hardened Materials

インサート選択の手引き

	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	XPPT-MM	WP25PM	XPPT-MM	WS40PM	XPPW-MH	WP40PM
P3–P4	XPPT-MM	WP25PM	XPPT-MM	WS40PM	XPPW-MH	WP40PM
P5–P6	XPPT-MM	WP25PM	XPPT-MM	WS40PM	XPPW-MH	WP40PM
M1–M2	XPPT-MM	WS40PM	XPPT-MM	WS40PM	XPPW-MH	WP40PM
M3	XPPT-MM	WS40PM	XPPT-MM	WS40PM	XPPW-MH	WP40PM
K1–K2	XPPW-MH	WU10PM	XPPW-MH	WU10PM	XPPW-MH	WU10PM
K3	XPPW-MH	WU10PM	XPPW-MH	WU10PM	XPPW-MH	WU10PM
S1–S2	XPPT-MM	WP25PM	XPPT-MM	WS40PM	–	–
S3	XPPT-MM	WS40PM	XPPT-MM	WS40PM	–	–
S4	XPPT-MM	WS40PM	XPPT-MM	WS40PM	–	–
H1	XPPW-MH	WU10PM	XPPW-MH	WU10PM	–	–

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40–100 %
.E..MM	0,46	1,32	2,43	0,32	0,89	1,53	0,24	0,65	1,09	0,21	0,56	0,94	0,19	0,52	0,85	.E..MM
.S..MH	0,84	1,84	3,12	0,59	1,21	1,85	0,43	0,87	1,30	0,38	0,75	1,12	0,34	0,69	1,02	.S..MH

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40–100 %
.E..MM	0,42	1,21	2,20	0,30	0,83	1,41	0,22	0,60	1,01	0,19	0,52	0,87	0,18	0,48	0,79	.E..MM
.S..MH	0,78	1,68	2,79	0,55	1,12	1,71	0,40	0,81	1,21	0,35	0,70	1,04	0,32	0,64	0,94	.S..MH

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..MM	0,37	1,06	1,89	0,27	0,73	1,24	0,20	0,53	0,89	0,17	0,46	0,77	0,16	0,42	0,70	.E..MM
.S..MH	0,68	1,46	2,35	0,48	0,98	1,49	0,36	0,71	1,07	0,31	0,62	0,92	0,28	0,56	0,84	.S..MH

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..MM	.020	.058	.109	.014	.039	.067	.010	.028	.047	.009	.025	.041	.008	.022	.037	.E..MM
.S..MH	.036	.080	.141	.025	.052	.080	.019	.037	.056	.016	.032	.048	.015	.029	.043	.S..MH

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..MM	.018	.051	.094	.013	.035	.059	.009	.025	.042	.008	.022	.037	.007	.020	.033	.E..MM
.S..MH	.032	.070	.118	.023	.046	.071	.017	.033	.050	.014	.029	.043	.013	.026	.039	.S..MH

Insert Geometry	Recommended Starting Feed per Tooth (Fz) in Relation to % of Radial Engagement (ae)															Insert Geometry
	5%			10%			20%			30%			40–100%
.E..MM	.015	.043	.076	.011	.029	.050	.008	.022	.036	.007	.019	.031	.006	.017	.028	.E..MM
.S..MH	.027	.058	.093	.019	.039	.059	.014	.028	.042	.012	.024	.036	.011	.022	.033	.S..MH

推奨切削速度の開始値［m/min］*

Material Group		WP25PM			WP40PM			WS40PM			WU10PM
P	1	395	340	325	355	310	295	–	–	–	–	–	–
	2	330	290	240	300	260	215	–	–	–	–	–	–
	3	305	260	210	275	235	190	–	–	–	–	–	–
	4	270	220	180	245	205	160	–	–	–	–	–	–
	5	220	205	180	205	185	160	205	175	145	–	–	–
	6	200	150	120	180	140	110	180	130	95	–	–	–
M	1	245	215	200	235	205	185	250	205	170	–	–	–
	2	220	190	155	210	180	150	215	175	145	–	–	–
	3	170	145	115	155	140	110	175	130	100	–	–	–
K	1	275	245	220	–	–	–	–	–	–	355	320	290
	2	215	190	180	–	–	–	–	–	–	275	245	230
	3	180	160	145	–	–	–	–	–	–	235	210	190
S	1	50	40	30	50	40	35	50	40	30	–	–	–
	2	50	40	30	50	40	35	50	40	30	–	–	–
	3	60	50	30	60	50	35	60	50	30	–	–	–
	4	85	60	40	80	60	40	70	60	35	–	–	–
H	1	145	110	85	–	–	–	–	–	–	190	155	110

Recommended Starting Speeds [SFM]*

Material Group		WP25PM			WP40PM			WS40PM			WU10PM
P	1	1295	1115	1065	1165	1015	970	1085	920	785	–	–	–
	2	1085	950	785	985	855	705	900	805	605	–	–	–
	3	1000	855	690	900	770	625	835	705	540	–	–	–
	4	885	720	590	805	675	525	755	625	490	–	–	–
	5	720	675	590	675	605	525	675	575	475	–	–	–
	6	655	490	395	590	460	360	590	425	310	–	–	–
M	1	805	705	655	770	675	605	820	675	560	–	–	–
	2	720	625	510	690	590	490	705	575	475	–	–	–
	3	560	475	375	510	460	360	575	425	330	–	–	–
K	1	900	805	720	–	–	–	–	–	–	1165	1050	950
	2	705	625	590	–	–	–	–	–	–	900	805	755
	3	590	525	475	–	–	–	–	–	–	770	690	625
S	1	165	130	100	165	130	115	165	130	100	–	–	–
	2	165	130	100	165	130	115	165	130	100	–	–	–
	3	195	165	100	195	165	115	195	165	100	–	–	–
	4	280	195	130	260	195	130	230	195	115	–	–	–
H	1	475	360	280	–	–	–	–	–	–	625	510	360

スペア部品 for VXF™-07 • Shell Mills • Inch

Spare Part TORX DRIVER

Spare Part ANTI-SEIZE LUBRICANT

INSERT SCREW

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO製品型番	材種

ようこそ

設定をご確認ください

設定の更新

提案製品

Product Family suggestions

専門家とのチャット

メッセージを送信する

専門家とのチャット

メッセージを送信する

ソリューション編集

ソリューション追加