提案製品

Product Family suggestions

がカートに正常に追加されました
カートを表示

通知

すべて既読にする
Mobile Menu

KM40TS™ • HPC • High Pressure Coolant Cutting Units

フィルタを選択
Filters
フィルタ
フィルタ
フィルタ表示
メートル
インチ
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (8)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (8)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (8)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (8)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (8)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (8)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (8)
  • M Stainless Steel (8)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (8)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (8)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (8)
  • K Cast Iron (8)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (8)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (8)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (8)
  • N Non-Ferrous Materials (8)
    • N1
      Wrought Aluminum
      (8)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (8)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (6)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (8)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (8)
    • N6
      Carbon, Graphite Composites, CFRP
      (8)
    • N7
      MMC's
      (8)
  • S High-Temp Alloys (8)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (8)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (8)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (8)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (8)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Applications
Applications
  • Facing Facing (8)
  • ID Facing ID Facing (4)
  • Multiple Direction Cutting Multiple Direction Cutting (8)
  • TRN Boring TRN Boring (4)
  • Turning Turning (8)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (8)
  • Interrupted (6)
  • Lightly Interrupted Cut (8)
  • Smooth Cut (8)
  • Varying Depth of Cut (8)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (4)
  • 95.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (4)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (6)
  • 3.0 (2)
  • 4.0 (4)
  • 6.0 (2)
  • 8.0 (2)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.002 in (2)
  • 0.004 in (8)
  • 0.008 in (6)
  • 0.014 in (2)
  • 0.016 in (8)
  • 0.024 in (2)
  • 0.031 in (8)
  • 0.047 in (8)
  • 0.062 in (2)
  • 0.063 in (6)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.05 mm (2)
  • 0.1 mm (8)
  • 0.2 mm (6)
  • 0.351 mm (2)
  • 0.4 mm (8)
  • 0.601 mm (2)
  • 0.8 mm (8)
  • 1.201 mm (8)
  • 1.576 mm (2)
  • 1.6 mm (6)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (4)
  • 241 (2)
  • CL4 (4)
  • CM2 (4)
  • CM3 (4)
  • CM4 (2)
  • CPX (4)
  • CW2 (4)
  • CW2015 (4)
  • CW5025 (6)
  • GX (2)
  • HK1500 (8)
  • HT2 (6)
  • HTX (4)
  • K060 (2)
  • K090 (4)
  • K1 (2)
  • K10M (8)
  • K10P (6)
  • K10U (8)
  • K15U (8)
  • K20K (6)
  • K21 (2)
  • K25M (8)
  • K25P (8)
  • K313 (8)
  • K35P (4)
  • K420 (2)
  • K45 (2)
  • K68 (6)
  • KB1340 (2)
  • KB1345 (2)
  • KB1610 (6)
  • KB1625 (4)
  • KB1630 (2)
  • KB5610 (6)
  • KB5625 (4)
  • KB5630 (4)
  • KB9610 (8)
  • KB9640 (4)
  • KBH10 (8)
  • KBH10B (4)
  • KBH20 (8)
  • KBH20B (4)
  • KBK35 (2)
  • KC210 (4)
  • KC250 (2)
  • KC5010 (8)
  • KC5020P (2)
  • KC5025 (8)
  • KC5410 (8)
  • KC5510 (6)
  • KC5525 (6)
  • KC710 (2)
  • KC720 (6)
  • KC722 (2)
  • KC725M (2)
  • KC730 (6)
  • KC7310 (6)
  • KC732 (6)
  • KC8050 (8)
  • KC810 (8)
  • KC850 (8)
  • KC9010 (6)
  • KC9025 (8)
  • KC910 (8)
  • KC9105 (8)
  • KC9110 (8)
  • KC9120 (6)
  • KC9125 (8)
  • KC9140 (6)
  • KC9145 (6)
  • KC9210 (2)
  • KC9215 (6)
  • KC9225 (8)
  • KC9240 (8)
  • KC9240NEW (8)
  • KC9245 (6)
  • KC9315 (8)
  • KC9320 (8)
  • KC9325 (6)
  • KC935 (8)
  • KC950 (8)
  • KC990 (6)
  • KCD25 (2)
  • KCK05 (8)
  • KCK05B (8)
  • KCK15 (8)
  • KCK15B (8)
  • KCK20 (8)
  • KCK20B (8)
  • KCM15 (8)
  • KCM15B (8)
  • KCM25 (8)
  • KCM25B (8)
  • KCM35 (8)
  • KCM35B (6)
  • KCP05 (8)
  • KCP05B (8)
  • KCP10 (8)
  • KCP10B (8)
  • KCP15 (2)
  • KCP25 (8)
  • KCP25B (8)
  • KCP25C (8)
  • KCP30 (8)
  • KCP30B (6)
  • KCP40 (6)
  • KCP40B (8)
  • KCPK05 (6)
  • KCS10 (4)
  • KCS10B (8)
  • KCU10 (8)
  • KCU25 (8)
  • KD050 (4)
  • KD081 (4)
  • KD100 (4)
  • KD120 (2)
  • KD1400 (6)
  • KD1405 (4)
  • KD1425 (6)
  • KM1 (2)
  • KMF (2)
  • KS15 (2)
  • KT1120 (2)
  • KT125 (4)
  • KT150 (2)
  • KT175 (6)
  • KT315 (8)
  • KT325 (6)
  • KTP10 (2)
  • KU10 (2)
  • KU10T (8)
  • KU30T (8)
  • KY1310 (4)
  • KY1320 (6)
  • KY1540 (2)
  • KY1615 (4)
  • KY2000 (2)
  • KY2100 (2)
  • KY3000 (4)
  • KY3400 (4)
  • KY3500 (6)
  • KY4000 (2)
  • KY4300 (2)
  • KY4400 (6)
  • KYHK15B (6)
  • KYK10 (4)
  • KYK25 (4)
  • KYK35 (6)
  • KYS25 (2)
  • KYS30 (4)
  • NL200 (4)
  • NL250 (6)
  • NL300 (4)
  • NL400 (4)
  • NL920 (6)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (4)
  • SP0819 (6)
  • SP3019 (6)
  • SP4019 (4)
  • THM (4)
  • THM-X (4)
  • THMF-X (2)
  • TN10P (8)
  • TN10U (8)
  • TN15M (8)
  • TN15U (8)
  • TN2000 (8)
  • TN20K (8)
  • TN20P (8)
  • TN30M (8)
  • TN30P (6)
  • TN4000 (8)
  • TN5015 (6)
  • TN5020 (8)
  • TN5105 (6)
  • TN5120 (8)
  • TN6010 (4)
  • TN6025 (6)
  • TN7005 (8)
  • TN7010 (8)
  • TN7015 (8)
  • TN7025 (8)
  • TN7035 (8)
  • TN7105 (8)
  • TN7110 (8)
  • TN7115 (8)
  • TN7125 (8)
  • TN7135 (8)
  • TN8025 (6)
  • TTI15 (6)
  • TTR (2)
  • TTS (4)
  • TTX (6)
  • WBH10C (8)
  • WBH10P (4)
  • WBH10U (6)
  • WBH20P (6)
  • WBH25P (4)
  • WBH25U (6)
  • WBH30P (4)
  • WBK40U (2)
  • WBK45U (4)
  • WDN00U (2)
  • WDN25U (6)
  • WK05CT (6)
  • WK15CT (8)
  • WK20CT (8)
  • WM15CT (8)
  • WM25CT (8)
  • WM35CT (6)
  • WP05CT (4)
  • WP15CT (8)
  • WP25CT (8)
  • WP35CT (8)
  • WS10PT (6)
  • WS25PT (6)
  • WU10HT (8)
  • WU10PT (8)
  • WU25PT (8)
  • X00511 (2)
  • X00580 (2)
  • X00581 (2)
  • X00582 (2)
  • X00583 (2)
  • X00584 (2)
  • X00585 (2)
  • X00586 (2)
  • X00591 (2)
  • X00592 (2)
  • X00593 (2)
  • X00594 (2)
  • X00596 (2)
  • X00597 (2)
  • X00599 (2)
Hand Of Tool
Hand Of Tool
  • L (2)
  • R (2)
Wiper Insert
Wiper Insert
  • N (8)
  • Y (6)
F Dimension
F Dimension
  • 27.0 mm (4)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 1.063 in (4)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 50.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.969 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • S (4)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (2)
  • NEUTRAL (ZERO) (2)
Maximum Bore Depth
Maximum Bore Depth
  • 1.575 in (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 40.0 mm (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
frontEnd
Clamp Style
Clamp Style
  • P (6)
  • S (2)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • D-DIAMOND/RHOMBIC 55 (2)
  • V-DIAMOND/RHOMBIC 35 (2)
  • W-TRIGON 80 (2)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (8)
  • B L (8)
  • C A (6)
  • C N (6)
  • D P (8)
  • H T (8)
  • H W (8)
backEnd
Connection Type
Connection Type
  • TAPER SHANK (4)
System Size
System Size
  • KM40TS (4)
Shank Height
Shank Height
  • 0.0 in (4)
Shank Height Min to Shank Height Max
Shank Height
Shank Height
  • 0.0 mm (4)
Shank Height Min to Shank Height Max
No filters matching ""
製品を表示
メートル
インチ

オリジナル製品

PCLN 95° • HPC PCLN 95° • HPC

P-Clamping
(2 Products)
  • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
  • Multi Coolant TurningMulti Coolant Turning
製品を表示
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
6250365 KM40TSPCLNL12HPC KM40TSPCLNL12HPC 40.0000 1.575 27.0000 1.063 50.0000 1.969 CN..120408/CN..432 0.36 0.80
    定価:
    $525.70 /各
    価格::
    6250363 KM40TSPCLNR12HPC KM40TSPCLNR12HPC 40.0000 1.575 27.0000 1.063 50.0000 1.969 CN..120408/CN..432 0.36 0.80
      定価:
      $525.70 /各
      価格::
      定価:
      割引: %
      価格::
      配置転換 この品目はありません
      交換品 この品目は、代理店経由で入手できる場合があります

      オリジナル製品

      PDJN 93° • HPC PDJN 93° • HPC

      P-Clamping
      (2 Products)
      • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Multi Coolant TurningMulti Coolant Turning
      • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
      • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
      製品を表示
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
      6250367 KM40TSPDJNL15050MHPC KM40TSPDJNL15050MHPC 50.0000 1.969 27.0000 1.063 DN..150608/DN..442 0.42 0.93
        定価:
        $525.70 /各
        価格::
        6250366 KM40TSPDJNR15050MHPC KM40TSPDJNR15050MHPC 50.0000 1.969 27.0000 1.063 DN..150608/DN..442 0.42 0.93
          定価:
          $525.70 /各
          価格::
          定価:
          割引: %
          価格::
          配置転換 この品目はありません
          交換品 この品目は、代理店経由で入手できる場合があります

          オリジナル製品

          SVJB 93° • HPC SVJB 93° • HPC

          S-Clamping
          (2 Products)
          • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
          • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
          • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Multi Coolant TurningMulti Coolant Turning
          製品を表示
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
          6250369 KM40TSSVJBL16050MHPC KM40TSSVJBL16050MHPC 50.0000 1.969 27.0000 1.063 VB..160408/VB..332 0.31 0.69
            定価:
            $525.70 /各
            価格::
            6250368 KM40TSSVJBR16050MHPC KM40TSSVJBR16050MHPC 50.0000 1.969 27.0000 1.063 VB..160408/VB..332 0.31 0.69
              定価:
              $525.70 /各
              価格::
              定価:
              割引: %
              価格::
              配置転換 この品目はありません
              交換品 この品目は、代理店経由で入手できる場合があります

              オリジナル製品

              PWLN 95° • HPC PWLN 95° • HPC

              P-Clamping
              (2 Products)
              • シャンク — KM-TS ISO 26622シャンク — KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Multi Coolant TurningMulti Coolant Turning
              • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • クーラント — スルークーラント 最大100 bar（1500 psi）クーラント — スルークーラント 最大100 bar（1500 psi）
              製品を表示
              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
              6250371 KM40TSPWLNL08HPC KM40TSPWLNL08HPC 40.0000 1.575 27.0000 1.063 50.0000 1.969 WN..080408/WN..432 0.35 0.78
                定価:
                $525.70 /各
                価格::
                6250370 KM40TSPWLNR08HPC KM40TSPWLNR08HPC 40.0000 1.575 27.0000 1.063 50.0000 1.969 WN..080408/WN..432 0.35 0.78
                  定価:
                  $525.70 /各
                  価格::
                  定価:
                  割引: %
                  価格::
                  配置転換 この品目はありません
                  交換品 この品目は、代理店経由で入手できる場合があります
                  product-image
                  Please adjust the following properties from

                  ISO製品型番

                  ANSI製品型番

                  to find similar products.
                  複製を作成しようとしています . 続行しますか?
                  削除しようとしています 続行しますか?
                  の名前を何に変更しますか?
                  有効な名前を入力してください
                  重複の名前を入力してください
                  有効な名前を入力してください
                  マイソリューションページにを追加しようとしています. 続行しますか?
                  有効な名前を入力してください
                  次のコピーを送信

                  有効なメールアドレスを入力してください
                  有効な名前を入力してください

                  次のCAD図面が見つかりました

                  お探しのファイルを一括して選択してダウンロードできます

                  お探しの種類のファイルが見つかりませんか?
                  図面請求 »

                  ダッシュボード情報を表示するには、ログインする必要があります
                  Session expired due to inactivity, please login again
                  カートに追加しようとした製品（）はありません カスタマーサービスにお問い合わせください。
                  アイテムがカートに正常に追加されました
                  カートを表示
                  DOWNLOAD TYPE:



                  . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                  SAP Material Number ISO製品型番 材種    
                  Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                  You are about to leave the Solution building process.

                  Are you sure you want to leave?